ENTRY AND START SYSTEM


  1. OUTLINE


    1. The entry and start system has the following main functions, making it a very user-friendly system.

      Function Outline
      Entry Function Entry Unlock

      The entry function unlocks the door when the depression on the front end of a retracted flush handle is pressed.


      • The driver door flush handle unlocks the driver door. (Driver Door Unlock Mode)

      • The driver door flush handle unlocks all doors. (All Door Unlock Mode)

      • A passenger door flush handle unlocks all doors.
      Entry Lock The entry lock function locks all the doors when the rear end of an extended flush handle is pressed.
      Luggage Compartment Door Open The luggage compartment door open function opens the luggage compartment door when the luggage electrical key switch is pressed.
      Wireless Door Lock Control The wireless door lock control function is a convenient system for locking and unlocking all the doors and opening the luggage compartment door at a distance. The basic operation is the same as that in the wireless door lock control system.
      Start Function

      The start function is operated by simply pushing the power switch while carrying the electrical key transmitter sub-assembly. When the power switch is pushed, the certification ECU turns the ACC relay, IG1 relay and IG2 relay on or off to switch the power source.*


      • The power source changes depending on depression of the brake pedal and the shift position.
      Immobiliser The immobiliser system compares the ID code that is registered in the certification ECU with the ID code of the transponder chip that is embedded in the electrical key transmitter sub-assembly.
      Steering Wheel Lock The steering wheel lock function is operated to lock and unlock the steering wheel by using a lock/unlock mechanism in the steering column assembly.

      *: In this chapter, the expression "power source" has been used in some locations to allow precise explanations. The power source condition is also expressed using conventional expressions such as "power switch off", "power switch on (ACC)" and "power switch on (IG)".

  2. PRECAUTION


    1. Door Control Receiver Expressions


      1. The type of door control receiver used on this model differs according to the specifications of the vehicle. The expressions listed in the table below are used in this section.

        Vehicle Specification Part Name in Manual Actual Part Name
        Models with Integrated Type Tire Pressure Warning ECU and Receiver Door Control Receiver Electrical Key and TPMS Receiver Assembly
        Models with Separated Type Tire Pressure Warning ECU and Receiver Door Control Receiver