PRE-COLLISION SYSTEM


  1. OPERATING CONDITION


    1. When all of the following conditions have been met, the camera heater (forward recognition hood) operates.


      • The power switch is turned on (IG).

      • The outside air temperature is approximately 10°C or less.

      • A few minutes have elapsed since the camera heater (forward recognition hood) operation stopped.

    2. After the camera heater (forward recognition hood) operates, the operation will stop when a certain length of time has elapsed.

      Tech Tips

      Operating time will differ depending on vehicle conditions (vehicle speed, outside air temperature, etc.).

  2. CONSTRUCTION


    1. The camera heater (forward recognition hood) is composed of the sheet heater (heating element) and temperature fuse, etc. Current is run through the sheet heater (heating element) to generate heat and warm the front portion of the forward recognition camera (camera sensor).

      A001LVGC01
      *1 Sheet Heater (Heating Element) *2 Temperature Fuse
      Heater Specifications
      Item Specification
      Heat Generation 5 W or less