METER / GAUGE SYSTEM

Info Added 2017-04-18


  1. FUNCTION


    1. Buzzer


      1. The table below shows the warning and reminder functions of the buzzer in the combination meter assembly.

        Priority Item
        1 READY
        2 Simple Intelligent Parking Assist Indication Pattern 1 (Once)*1
        3 Simple Intelligent Parking Assist Indication Pattern 1 (Twice)*1
        4 Simple Intelligent Parking Assist Indication Pattern 2 (Once)*1
        5 Simple Intelligent Parking Assist Indication Pattern 2 (Twice)*1
        6 Simple Intelligent Parking Assist Indication Pattern 3 (Once)*1
        7 Entry and Start System Warning (Intermittent)
        8 Door Open when Shift Lever not in P Warning
        9 Seat Belt Warning (Level 2)
        10 Seat Belt Warning (Level 1)
        11 Brake Force Reduction Warning
        12 Brake Fluid Low Warning
        13 EPS Warning (Intermittent)
        14 Power Switch Operation while Driving Warning
        15 Vehicle Roll-away Notification Pattern 2
        16 Accelerator Depression with N Position
        17 Accelerator Depression Hold Warning
        18 Lane Departure Alert Warning*2
        19 Hybrid System Warning (Intermittent: 0.2 seconds cycle)
        20 Hybrid System Warning (Intermittent: 0.4 seconds cycle)
        21 Hybrid System Warning (Intermittent: 0.7 seconds cycle)
        22 Hybrid System Warning (Intermittent: 1.2 seconds cycle)
        23 Hybrid System Warning (Continuous)
        24 Hybrid System Warning (Once)
        25 Towing Prohibition Notification
        26 Vehicle Roll-away Notification Pattern 1
        27 Parking Brake Engaged Warning
        28 HV Battery Low Warning (SOC: 18 % or less)
        29 Brake System Temperature Warning/Active Test
        30 Speed Limit Exceed Warning*3
        31 Warning Buzzer for Shift Lever in P Advice
        32 Engine Oil Pressure Warning
        33 Door Open while Driving Warning
        34 Entry and Start System Warning (Intermittent, Maximum 9 Times)
        35 HV Battery Low Warning (SOC: 25 % or less)
        36 Road Sign Assist Indication*4
        37 Engine Start while Driving Notice
        38 Sport Shift Reject Warning
        39 EV Driving Mode Reject Warning
        40 Low Speed Zone Leading Vehicle Lost Warning*2
        41 Hands off Steering Wheel Warning*3
        42 Dynamic Radar Cruise Control Cancellation due to Low Speed Warning*2
        43 Lane Departure Alert System Cancel Warning*2
        44 Vehicle Sway Warning*2
        45 EPS Warning (Once)
        46 Engine Coolant Temperature Warning
        47 Hybrid Unit Overheat Warning
        48 Multi-information Display Warning
        49 Light Reminder
        50 Entry and Start System Warning (Once)
        51 Immobiliser Certification Reminder
        52 Turn Signal/Hazard Warning Operation

        *1: Models with simple intelligent parking assist system

        *2: Models with Toyota safety sense

        *3: Models with speed limiter control system

        *4: Models with road sign assist system

    2. Multi-information Display


      1. Display Function Flow


        • The multi-information display can be switched as shown in the flow chart below:

          B003XBME01
          Item Display Change Condition
          *a Conditions are met.
          *b Conditions are not met.
          *c If there are multiple display requests, items will be displayed in sequence
          *d Item or display is selected by operating the steering pad switch
          *e The ending display is displayed for a certain period of time after the power switch is turned off.

      2. Display Tab Operation


        • The information currently displayed can be switched using the RIGHT/LEFT switch of the steering pad switch assembly.

          B003XCEC01
          *A Models with Navigation System *B Models with Display Audio System
          *C Models with Toyota Safety Sense - -
          *1 Steering Pad Switch Assembly - -
          *a LEFT Switch *b RIGHT Switch
          *c Drive Information Tab *d Navigation Information Tab
          *e Audio Information Tab *f Driving Assist System Information Tab
          *g Warning Message Tab *h Setting Tab
          *i The illustrations shown are examples only. The illustrations may differ from the actual vehicle screen. - -
          B003XCK RIGHT switch operation B003XBC LEFT switch operation

      3. Drive Information


        • The drive information tab shows vehicle information such as drivable range and fuel consumption.

        • The drive information display can be changed using the UP/DOWN switch of the steering pad switch assembly.

          B003XCQC01
          *A Models with Toyota Safety Sense - -
          *1 Steering Pad Switch Assembly - -
          *a UP Switch *b DOWN Switch
          *c Drive Information 1 *d Drive Information 2
          *e Energy Monitor *f Digital Vehicle Speed and Cruising Range Display
          *g Vehicle Sway Warning Display *h Blank
          *i The illustrations shown are examples only. The illustrations may differ from the actual vehicle screen. - -

      4. Setting Function


        • The items displayed on the multi-information display can be customized.

        • The following items can be selected on the information setting screen.

          Lane Departure Alert System (Models with Toyota safety sense)
          Item Available Setting
          Steering Assist

          • Setting for steering assist can be set to on/off:


            • On

            • Off
          Warning Sensitivity

          • Alert sensitivity of alert system can be changed:


            • High

            • Standard
          Vehicle Sway Warning

          • Vehicle sway warning can be selected:


            • On

            • Off
          Vehicle Sway Warning Sensitivity

          • Vehicle sway warning sensitivity can be selected:


            • High

            • Standard

            • Low
          Pre-collision System (Models with Toyota safety sense)
          Item Available Setting
          PCS

          • The pre-collision system can be set to on/off:


            • On

            • Off
          The pre-collision system warning timing

          • The pre-collision system warning timing can be selected:


            • Far (Icon is displayed)

            • Middle (Icon is displayed)

            • Near (Icon is displayed)
          Blind Spot Monitor System (Models with Blind Spot Monitor System)
          Item Available Setting
          BSM

          • The blind spot monitor system can be set to on/off:


            • ON

            • OFF
          RCTA

          • The RCTA function can be set to on/off:


            • ON

            • OFF

          Tech Tips

          Setting can only be changed when blind spot monitor system is ON.
          TOYOTA Parking Assist-sensor System (Models with TOYOTA parking assist-sensor system)
          Item Available Setting
          TOYOTA Parking Assist-sensor System

          • The TOYOTA parking assist-sensor system can be set to on/off:


            • ON

            • OFF
          Road Sign Assist (Models with road sign assist system)
          Item Available Setting
          Road Sign Assist

          • The road sign assist system can be set to on/off:


            • ON

            • OFF
          Drive Mode
          Item Available Setting
          Drive Mode

          • The drive mode can be changed:


            • SPORT

            • NORMAL

            • ECO
          Instrument Panel Light
          Item Available Setting
          Display Brightness Select to adjust brightness of the instrument panel light.
          Vehicle settings
          Item Available Setting
          Road Sign Assist Setup* Notification Method

          • Select to change the notification method of the following warnings between No Notification, Only Visual and Visual and Audible:


            • Excess Speed


              • Warns the driver if the vehicle exceeds the speed on the speed limit sign displayed on the multi-information display.

            • Others


              • Warns the driver if the system determines that the vehicle is overtaking when a no overtaking sign is displayed on the multi-information display.
          Notification Level

          • Select to set the speed threshold over which the excess speed warning starts to operate when a speed limit sign is displayed on the multi-information display.


            • 2 km/h (1 mph)

            • 5 km/h (3 mph)

            • 10 km/h (5 mph)
          TPMS Setup The tire pressure monitor system can be initialized.

          *: Models with road sign assist system

          Meter Settings
          Item Available Setting
          Language

          • The language used on the multi-information display can be selected:


            • English (Default)

            • German

            • French

            • Spanish

            • Italian

            • Portuguese

            • Dutch

            • Swedish

            • Norwegian

            • Danish

            • Russian

            • Finnish

            • Greek

            • Polish

            • Ukrainian

            • Turkish

            • Hungarian

            • Czech

            • Slovak

            • Romanian
          Unit

          • The unit displayed on the multi-information display can be selected:


            • km (km/L)

            • km (L/100 km)

            • miles (MPG)
          EV Mode Indicator Light

          • The EV Mode Indicator Light can be switched:


            • ON (Default)

            • OFF
          Drive Information 1

          • 2 items can be selected among the following:


            • Current Fuel Consumption (Bar Display) (Default of upper area)

            • Current Fuel Consumption (Value Display)

            • Total Average Fuel Consumption between Rest Operations (Default of lower area)

            • Average Fuel Consumption after Hybrid System Start-up

            • Average Fuel Consumption after Refueling

            • Total Average Vehicle Speed between Reset Operations

            • Average Vehicle Speed after Hybrid System Start-up

            • Total Elapsed Time between Reset Operations

            • Elapsed Time after Hybrid System Start-up

            • Cruising Range

            • Cruising Range after Hybrid System Start-up

            • Blank
          Drive Information 2

          • 2 items can be selected among the following:


            • Current Fuel Consumption (Bar Display)

            • Current Fuel Consumption (Value Display)

            • Total Average Fuel Consumption between Rest Operations

            • Average Fuel Consumption after Hybrid System Start-up

            • Average Fuel Consumption after Refueling

            • Average Vehicle Speed after Hybrid System Start-up

            • Average Vehicle Speed after Engine Start-up

            • Total Elapsed Time between Reset Operations

            • Elapsed Time after Hybrid System Start-up

            • Cruising Range (Default of upper area)

            • Cruising Range after Hybrid System Start-up

            • Blank
          Interruption Display

          • The following displays that appear as soon as the set conditions are met can be switched to ON (Default) or OFF:


            • Incoming Telephone Display*
          Initialization The set items can be initialized.

          *: Models with display audio system

      5. Warning Mode Function


        • When a warning is necessary, the warning display interrupts the current display on the multi-information display.

        • The master warning light may illuminate or blink and the buzzer in the combination meter assembly may sound depending on the item displayed on the multi-information display.

        Priority Display Master Warning Light Buzzer
        1 2WD(FWD) TEST MODE - -
        2WD(FWD) CERTIFICATION MODE - -
        RES-1 - -
        RES-2 - -
        RESOLVER-1 NOT ADJUSTED - -
        RESOLVER-2 NOT ADJUSTED - -
        ADJUSTING LDA CAMERA*1 - -
        ADJUSTING FRONT RADAR BEAM*1 - -
        ADJUSTING FRONT RADAR BEAM ERROR*1 - -
        ADJUSTING FRONT RADAR BEAM ALONG VERTICAL AXIS*1 - -
        ADJUSTING FRONT RADAR BEAM ALONG HORIZONTAL AXIS*1 - -
        CHECKING CRUISE CONTROL BRAKE*1 - -
        CHECKING PRE-CRASH BRAKE*1 - -
        BRAKE!*1 - -
        Push and Hold POWER Switch for Emergency Stop Blinks -
        Shift to N Position & Push POWER Switch to Restart Blinks -
        Hybrid System Stopped. Shift to P Position Blinks -
        Hybrid System Stopped. Stop in a Safe Place. Blinks -
        2 Dynamic radar cruise control warning reminder indicator (image display)*1 - -
        Lane departure alert warning reminder indicator (image display)*1 - -
        Braking Power Low. Stop in a Safe Place, See Owner's Manual. Blinks Sounds
        Shift to P Before Exiting Vehicle. Blinks Sounds
        Hybrid System Malfunction. Do Not Tow Vehicle. Illuminates Sounds
        3 IPA Cancelled, Take Over. IPA Malfunction.*2 - Sounds
        IPA Cancelled, Take Over.*2 - Sounds
        IPA Space Not Detected, Speed Too High.*2 - Sounds
        IPA Cancelled, Take Over. Speed Too High.*2 - Sounds
        IPA Cancelled, Take Over. Driver Intervened.*2 - Sounds
        IPA Cancelled, Take Over. TRC/VSC is Off.*2 - Sounds
        IPA Cancelled, Take Over. TRC/ABS/VSC Activated.*2 - Sounds
        IPA Cancelled, Take Over. Timeout.*2 - Sounds
        IPA Unavailable, Parking Space Too Short.*2 - Sounds
        IPA Cancelled, Take Over. Parking Space Too Short.*2 - Sounds
        IPA Cancelled. Approached Obstacle in Front, Shift into R.*2 - Sounds
        IPA Cancelled. Approached Obstacle at Rear, Shift into D.*2 - Sounds
        IPA Cancelled, Take Over. ICS Activated.*2 - Sounds
        IPA Unavailable, Speed Too High.*2 - Sounds
        IPA Unavailable, TRC/VSC is Off.*2 - Sounds
        IPA Malfunction. Visit Your Dealer.*2 Illuminates Sounds
        IPA Unavailable.*2 Illuminates Sounds
        IPA Unavailable. Stop The Vehicle, Turn Steering Wheel from Left End to Right End.*2 - Sounds
        System Not Ready*2 - Sounds
        Push IPA-SW*2 - Sounds
        Memory Error*2 - Sounds
        Write Zero-Point of Steering Angle*2 - Sounds
        Write Maximum Steering Angle*2 - Sounds
        End of Adjustment*2 - Sounds
        4 Shift to P Before Exiting Vehicle. Blinks Sounds
        Door open while driving (image display) Blinks Sounds
        Door open (image display) - -
        Clearance sonar detection (image display)*2 - -
        Parking Assist Malfunction*2 Illuminates Sounds
        Clean Parking Assist Sensor (image display)*2 Illuminates Sounds
        5 Auto Power Off to Conserve Battery. - -
        6 Shift is in N Release Accelerator Before Shifting. Blinks Sounds
        Depress Brake When Vehicle is Stopped. Hybrid System May Overheat. Blinks Sounds
        Hybrid Battery Low, Hybrid System Stopped. Shift To P And Restart Blinks Sounds
        7 Hybrid System Malfunction. Illuminates Sounds
        Check Engine. Illuminates Sounds
        Hybrid Battery System Malfunction. Illuminates Sounds
        Accelerator Malfunction. Illuminates Sounds
        Visit Your Dealer. Illuminates Sounds
        Output Power Greatly Reduced. Visit Your Dealer. Illuminates Sounds
        Output Power Reduced. Visit Your Dealer. Illuminates Sounds
        Stop in a Safe Place, See Owner's Manual. Illuminates Sounds
        Stop in a Safe Place within 0.5 km. Illuminates Sounds
        Stop in a Safe Place Within 0.3 miles. Illuminates Sounds
        Stop in a Safe Place Within 1.0 km. Illuminates Sounds
        Stop in a Safe Place Within 0.6 miles. Illuminates Sounds
        Stop in a Safe Place Within 1.5 km Illuminates Sounds
        Stop in a Safe Place Within 0.9 miles. Illuminates Sounds
        Stop in a Safe Place Within 2.0 km. Illuminates Sounds
        Stop in a Safe Place Within 1.2 miles. Illuminates Sounds
        Stop in a Safe Place Within 5.0 km. Illuminates Sounds
        Stop in a Safe Place Within 3.1 miles. Illuminates Sounds
        Stop in a Safe Place Within 10 km. Illuminates Sounds
        Stop in a Safe Place Within 6.2 miles. Illuminates Sounds
        Output Power Reduced. Avoid Shifting to N. Illuminates Sounds
        Avoid Shifting to N. Visit Your Dealer. Illuminates Sounds
        Hybrid System Stopped, Stop in a Safe Place. Illuminates Sounds
        Shift to P. See Owner's Manual. Illuminates Sounds
        Hybrid Battery Low. Shift Out Of N To Recharge. Blinks Sounds
        Power Steering Malfunction. Steering Power Low. Visit Your Dealer. Blinks Sounds
        Power Steering Malfunction. Steering Power Low. Visit Your Dealer. Illuminates Sounds
        Abnormal Voltage. Steering Power Low. Visit Your Dealer. Blinks Sounds
        Abnormal Voltage. Steering Power Low. Visit Your Dealer. Illuminates Sounds
        Power Steering Malfunction. Visit Your Dealer. Illuminates Sounds
        EPB Applied. Blinks Sounds
        Vehicle May Roll Out. Shift to P. Blinks Sounds
        Brake Hold Fault. Depress Brake to Deactivate. Visit Your Dealer. Illuminates Sounds
        Brake Hold Warning. Depress Brake on Slope. Blinks Sounds
        EPB Activation Incomplete. Blinks Sounds
        Key Not Detected, Check Key Location. - Sounds
        EPB Release Unavailable, Depress Brake Pedal for EPB Release. Blinks Sounds
        Release Accelerator. Blinks Sounds
        8 LDA. Driver Attention Required.*1 Illuminates Sounds
        LDA. Hold Steering Wheel.*1 - -
        LDA Steering Assist Unavailable, Hold Steering Wheel.*1 Illuminates Sounds
        LDA. Hold Steering Wheel.*1 Illuminates Sounds
        EPB Frequently Operated, Wait a Minute. Blinks Sounds
        9 Antilock Brake System Malfunction. Visit Your Dealer. - Sounds
        Engine Coolant Temperature High. Stop in a Safe Place. See Owner's Manual. - Sounds
        Vehicle May Roll Out. Park The Vehicle on Flat Road. Blinks Sounds
        Charging System Malfunction. Stop in a Safe Place. See Owner's Manual. Illuminates -
        Clean Radar Sensor.*1 Illuminates Sounds
        Cruise Control Unavailable.*1 Illuminates Sounds
        Cruise Control Unavailable. Depress The Brake Pedal.*1 - -
        Cruise Control Off. Shifted to P Position. Depress The Brake Pedal and Shift to D to Restart.*1 - Sounds
        LDA Unavailable.*1 Illuminates Sounds
        Grille Shutter Not Initialized. Cancel Maintenance Mode.*3 Illuminates -
        Grille Shutter Inoperative. Visit Your Dealer.*3 Illuminates Sounds
        Entry & Start System Malfunction. See Owner's Manual. Illuminates Sounds
        Blind Spot Monitor Unavailable.*4 Illuminates Sounds
        Check Cruise Control System. Visit Your Dealer.*5 Illuminates Sounds
        Check Cruise Control System. Depress The Brake Pedal. Visit Your Dealer.*5 Illuminates Sounds
        Check Speed Limiter System.*6 Illuminates Sounds
        Lane Departure Alert Malfunction. Visit Your Dealer.*1 Illuminates Sounds
        Front Camera Unavailable.*1 Illuminates Sounds
        LDA ON. Steering Assist Active.*1 - -
        LDA ON. Steering Assist Inactive.*1 - -
        Front Camera Vision Blocked. Clean and Demist Windshield.*1 Illuminates Sounds
        Pre-Collision System Malfunction. Visit Your Dealer.*1 Illuminates Sounds
        Blind Spot Monitor System Malfunction. Visit Your Dealer.*4 Illuminates Sounds
        Engine Oil Pressure Low. Illuminates Sounds
        Braking Power Low. Visit Your Dealer. - Sounds
        EPB Unavailable. Illuminates Sounds
        Check RSA System.*7 Illuminates Sounds
        EPB Malfunction. Visit Your Dealer. Illuminates Sounds
        Low 12-Volt Battery. See Owner's Manual. - -
        Use on Expressway Only. Beware of Stopping or Merging Vehicles!*1 - -
        LDA Unavailable Below Approx. 50 km/h.*1 - -
        LDA Unavailable Below Approx. 32 MPH.*1 - -
        LDA Unavailable at Current Speed.*1 - -
        10 Dynamic radar cruise control (image display)*1 - -
        Lane departure alert (image display)*1 - -
        Hybrid System Stopped. Steering Power Low. Illuminates Sounds
        Turn Power Off. Blinks Sounds
        Would You Like To Take A Rest?*1 - Sounds
        Please Take A Rest.*1 - Sounds
        Key Detected in Vehicle. - -
        Turn Lights Off. Blinks Sounds
        Window Open. Blinks Sounds
        Depress Brake Pedal and Touch POWER Switch with Key. - Sounds
        Not Ready to Drive. Depress Brake Pedal & Push POWER Switch to Start. - -
        Depress Brake Pedal & Push POWER Switch to Start. - -
        Push POWER Switch while Turning The Steering Wheel in Either Direction. Blinks Sounds
        Shift to P Position to Start. Blinks Sounds
        11 Brake Hold Malfunction. Visit Your Dealer. Illuminates Sounds
        Brake Hold Less Effective during Icy Conditions. - -
        Brake Hold Active. Depress Brake and Switch to Deactivate. - Sounds
        Brake Hold Unavailable. Driver Door Open. - Sounds
        EPB Can't be Released. Close Door and Fasten Your Seatbelt. Blinks Sounds
        Brake Hold Unavailable. Driver Seat Belt Unbuckled. - Sounds
        Brake Hold Unavailable. Hood or Trunk Open. - Sounds
        Depress Brake to Maintain Brake Hold. - Sounds
        Close Driver Door to Maintain Brake Hold. - Sounds
        Fasten Driver Seat Belt to Maintain Brake Hold. - Sounds
        Brake System Overheated. Brake Hold Unavailable. - Sounds
        EPB Automatically Applied. Blinks Sounds
        Drive-Start Control Malfunction. Visit Your Dealer. Illuminates Sounds
        Brake Override Malfunction. Visit Your Dealer. Illuminates Sounds
        12 Key Battery Low. Replace Key Battery. - Sounds
        Engine Oil Level Low. Add or Replace Oil. - -
        Hybrid System Overheated. Reduced Output Power. Illuminates Sounds
        Headlight System Malfunction. Visit Your Dealer.*8 Illuminates Sounds
        Accelerator and Brake Pedals Depressed Simultaneously. Blinks -
        13 Maintenance Required For Hybrid Battery Cooling Parts At Your Dealer. - -
        Low Washer Fluid.*9 - -
        Traction Control Turned OFF. - -
        To Activate AHB, Switch Headlights to High Beam.*1 - -
        Depress Brake Pedal & Push POWER Switch to Start. - -
        VSC Turned Off. Pre-Collision Brake System Unavailable.*1 - -
        Pre-Collision System Unavailable.*1 - -
        Front Camera Unavailable.*1 - -
        Front Camera Vision Blocked. Clean and Demist Windshield.*1 - -
        Pre-Collision System Unavailable. Clean Sensor.*1 - -
        EV Mode Unavailable. - Sounds
        EV Mode Unavailable. System Warming Up. - Sounds
        EV Mode Unavailable. Hybrid Battery Low. - Sounds
        EV Mode Unavailable. Speed Range Exceeded. - Sounds
        EV Mode Unavailable. Reduce Acceleration to Activate. - Sounds
        EV Mode Deactivated. - Sounds
        EV Mode Deactivated. Hybrid Battery Low. - Sounds
        EV Mode Deactivated. Speed Range Exceeded. - Sounds
        EV Mode Deactivated. Accelerator Depressed Too Far. - Sounds
        Theft Sensor Turned Off.*10 - -
        Theft Sensor Turned On.*10 - -
        EPB Shift Interlock Function Activated. - Sounds
        EPB Shift Interlock Function Deactivated. - Sounds
        Pre-Collision System Off.*1 - -
        14 A New Key has been Registered. Contact Your Dealer for Details. - -

        *1: Models with Toyota safety sense

        *2: Models with Toyota parking assist-sensor system

        *3: Models with grille shutter system

        *4: Models with blind spot monitor system

        *5: Models with cruise control system

        *6: Models with speed limiter control system

        *7: Models with road sign assist system

        *8: Models with LED headlight system

        *9: Models with washer fluid level warning system

        *10: Models with intrusion sensor (theft warning ultrasonic sensor)

  2. OPERATION


    1. Hybrid System Indicator


      1. The Hybrid System Indicator will begin to operate when both of the following conditions are met:


        • The hybrid system is operating (the READY indicator light is illuminated).

        • Shift position is not in P, N or R.