LIGHTING SYSTEM


  1. FUNCTION


    1. The illuminated entry system has the following functions:

      Function Outline Lights that Operate
      Actuation Area-linked

      • When a registered key enters any actuation area around the doors, the lights that operate turn on.

      • When a registered key leaves all of the actuation areas around the doors, the lights that operate turn off.

      • Map Light Assembly*1

      • Dome Light*2
      Door Lock/Unlock-linked

      • When any door is unlocked, the lights that operate turn on.

      • When all doors are locked, the lights that operate turn off.

      • Power Switch Illumination

      • Map Light Assembly*1

      • Dome Light*2

      • Front Door Trim Illumination*3

      • Cup Holder Illumination*4
      Door Open/Close-linked When any door is opened, the lights that operate turn on.

      • Power Switch Illumination

      • Map Light Assembly*1

      • Dome Light*2

      • Front Door Trim Illumination*3

      • Cup Holder Illumination*4
      When all doors are closed, the lights that operate turn off.

      • Power Switch Illumination

      • Map Light Assembly*1

      • Dome Light*2
      Power Source-linked When the power switch is turned from on (ACC) or on (IG) to off, the lights that operate turn on.

      • Power Switch Illumination

      • Map Light Assembly*1

      • Dome Light*2
      When the power switch is turned from off to on (ACC) or on (IG), the lights that operate turn off. Power Switch Illumination
      Illumination Light Control Function

      The lights operate dim when all of the following conditions are met:


      • The power switch is on (IG).

      • All doors are closed.

      • The shift lever is moved from P to any other position.

      • Power Switch Illumination*7

      • Front Door Trim Illumination*3

      • Cup Holder Illumination*4
      Delay

      When approximately 15 seconds elapse after the following condition is met, the lights that operate turn off:


      • An actuation area-linked function is operated.

      • Map Light Assembly*1

      • Dome Light*2

      When approximately 15 seconds elapse after the following condition is met, the lights that operate turn off:


      • A power source-linked function is used.

      • Map Light Assembly*1

      • Dome Light*2

      • Front Door Trim Illumination*3

      • Cup Holder Illumination*4

      When approximately 15 seconds elapse after either of the following conditions is met, the lights that operate turn off:


      • The door unlock-linked function is operated.

      • Any door is opened and then all doors are closed when the power switch is off.

      • Map Light Assembly*1

      • Dome Light*2

      • Front Door Trim Illumination*3

      • Cup Holder Illumination*4

      When approximately 40 seconds elapse after the following condition is met, the lights that operate turn off:


      • Any door is opened and then all doors are closed when the power switch is off.

      		 Power Switch Illumination
      Battery Saving

      • When 20 minutes elapse after the power switch is turned from on (ACC) or on (IG) to off and the lights that operate remain on, the lights are turned off.

      • The battery saving function is canceled when any of the following operations is performed before the lights are turned off by the function. After the operation is performed, the lights remain on for another 20 minutes and then the lights are turned off.


        • The power switch is turned on (ACC) or on (IG).

        • Any door is opened and closed.

        • The back door is opened and closed.

        • Any door is unlocked.

        • The key enters any exterior actuation area.

      • Power Switch Illumination

      • Map Light Assembly*1

      • Dome Light*2

      • Vanity Light Assembly*5

      • No. 1 Luggage Compartment Light Assembly*6
      Interior Light Auto Cut Function

      • When 20 minutes elapse after the power switch is turned from on (ACC) or on (IG) to off and the lights that operate remain on, the lights are turned off.

      • The interior light auto cut function is canceled when any of the following operations is performed before the lights are turned off by the function. After the operation is performed, the lights remain on for another 20 minutes and then the lights are turned off.


        • The power switch is turned on (ACC) or on (IG).

      • Map Light Assembly*1

      • Dome Light*2

      • Vanity Light Assembly*5

      • No. 1 Luggage Compartment Light Assembly*6

      *1: Models with map light assembly

      *2: Models with dome light

      *3: Models with front door trim illumination

      *4: Models with cup holder illumination

      *5: Models with vanity light assembly

      *6: Models with No. 1 luggage compartment light assembly

      *7: RHD Models