BLIND SPOT MONITOR SYSTEM

Info Added 2017-04-18


  1. FUNCTION OF MAIN COMPONENTS

    Component Function
    Blind Spot Monitor Sensor LH and RH

    • Outputs millimeter waves from the blind spot monitor sensor to the blind spot sensor detection area, uses the reflected millimeter waves for detecting the presence of a vehicle, the vehicle-to-vehicle distance, and the relative speed, and then sends this information to the built-in signal processing circuit.

    • The signal processing circuit determines if a vehicle is present, and illuminates or blinks the outer rear view mirror indicator accordingly.

    • Dims the outer rear view mirror indicator light on the outer rear view mirror assembly.
    Outer Rear View Mirror Assembly LH and RH Outer Rear View Mirror Indicator Light

    • Illuminates to inform the driver that a vehicle has been detected in the blind spot monitor sensor detection area.

    • Flashes to inform the driver when the turn signal lever is operated if a vehicle has been detected in the blind spot monitor sensor detection area.

    • Both indicator lights flash to inform the driver that a vehicle has been detected in the blind spot detection area while the driver is reversing.
    Combination Meter Assembly Master Warning Light When a malfunction is detected in the blind spot monitor sensors or the blind spot monitor sensors determine that control is not possible, the master warning light illuminates and a message is displayed on the multi-information display to warn the driver.
    Multi-information Display
    BSM Indicator Light Illuminates to inform the driver when the blind spot monitor system is on.
    RCTA Indicator Light Illuminates to inform the driver when the RCTA function is on.
    Combination Meter Assembly Sends the turn light signal to the blind spot monitor sensor LH and RH.
    Steering Pad Switch Assembly Sends operation signals from switches to the spiral cable with sensor sub-assembly.
    Spiral Cable with Sensor Sub-assembly Sends operation signals from the steering pad switch assembly to the combination meter assembly.
    Steering Sensor Sends the steering angle signal to the blind spot monitor sensor LH and RH.
    Airbag Sensor Assembly Sends yawrate information to the blind spot monitor sensor LH and RH.
    Yawrate Sensor Assembly
    Hybrid Vehicle Control ECU Sends the reverse signal to the blind spot monitor sensor LH and RH.

    Brake Booster with Master Cylinder Assembly


    • Skid Control ECU

    		 Sends the vehicle speed signal to the blind spot monitor sensor LH and RH.
    Main Body ECU (Multiplex Network Body ECU) Sends the destination signal, illumination signal and dimmer signal to the blind spot monitor sensor LH and RH.
    RCTA Buzzer (Blind Spot Monitor Buzzer) Sounds when a vehicle is detected in the blind spot monitor sensor detection area while the driver is reversing.

  2. SYSTEM CONTROL


    1. The blind spot monitor function operates when all of the following conditions are met:


      1. The blind spot monitor function is on.

      2. The shift lever is in a position other than R.

      3. The vehicle speed is greater than approximately 16 km/h (10 mph).

    2. The blind spot monitor function can detect vehicles in its detection areas.


      1. The detection areas formed by the blind spot monitor sensor LH and RH are as shown below.

        A001LS5C01
        *a Approximately 3.5 m (11.5 ft) *b Approximately 60 m (197 ft)
        *c Approximately 3.0 m (9.8 ft) *d Approximately 1.0 m (3.3 ft)
        B003XAT Detection Area (for Vehicle in Blind Spot) B003XCL Detection Area (for Rapidly Approaching Vehicle from Behind)

      2. Detection Area


        • When this vehicle is overtaken by another vehicle in an adjacent lane.

          A001LNAC03
          *a This Vehicle - -
          B003XBC Vehicle Speed (Fast) B003XCK Vehicle Speed (Slow)
          B003XAT Detection Area - -

        • When another vehicle enters the detection area of this vehicle due to a lane change.

          A001LR8C07
          *a Other vehicle enters the detection area during lane change (merge in) (Type 1). *b Other vehicle enters the detection area during lane change (merge in) (Type 2).
          *c This Vehicle - -
          B003XBC Motion direction of this vehicle B003XCK Motion direction of other vehicle
          B003XAT Detection Area - -

      3. Detection Area


        • When another vehicle is rapidly approaching from behind.

          A001LKSC01
          *a This Vehicle - -
          B003XBC Vehicle Speed (Fast) B003XCK Vehicle Speed (Slow)
          B003XCL Detection Area - -

        • When another vehicle enters the detection area of this vehicle due to a lane change and approaches this vehicle.

          A001LL0C01
          *a Other vehicle enters the detection area during lane change (merge in) (Type 1). *b Other vehicle enters the detection area during lane change (merge in) (Type 2).
          *c This Vehicle - -
          B003XBC Motion direction of this vehicle B003XCK Motion direction of other vehicle
          B003XCL Detection Area - -

    3. The RCTA function operates when all of the following conditions are met:


      1. The RCTA function is on.

      2. The shift lever is in R.

      3. The speed of this vehicle is less than approximately 8 km/h (5 mph).

      4. Target vehicle's speed is between approximately 8 km/h (5 mph) and 28 km/h (18 mph).

    4. The RCTA function can detect vehicles in its detection areas.


      1. The system continuously measures the relative speed of an approaching vehicle and its distance. If it is determined that the approaching vehicle will cross the path of this vehicle, the Estimated Crossing Time (ECT) is calculated. When the ECT is 2.5 seconds or less, the system alerts the driver by flashing the outer rear view mirror indicator lights and sounding the RCTA buzzer (blind spot monitor buzzer).

        A001LQ7C01
        *a This Vehicle *b Target Vehicle (Approximately 8 km/h (5 mph))
        *c Target Vehicle (Approximately 28 km/h (18 mph)) *d Approximately 5.5 m (18.0 ft.)
        *e Approximately 20 m (66 ft.) *f Target Detection Line
        B003XAT Alert Area - -

      2. Normal Parking

        A001LO8C01
        *a This Vehicle *b Target Vehicle
        B003XCL Alert Area - -

    5. According to operation conditions, the blind spot monitor function promotes safety confirmation by using the outer rear view mirror indicator light to inform the driver that system detects vehicles that are in or rapidly approaching the vehicle's blind spot.

    6. The outer rear view mirror indicator light illuminates when a vehicle is in or rapidly approaching the vehicle's blind spot and the turn light switch is not operated. The indicator light flashes when a vehicle is in or rapidly approaching the vehicle's blind spot and the turn light switch is operated.

      A001LN0E01

    7. According to operation conditions, the RCTA function promotes safety confirmation by using the outer rear view mirror indicator lights and RCTA buzzer (blind spot monitor buzzer) to inform the driver that another vehicle has entered the blind spot monitor sensor alert area of this vehicle.

    8. When this vehicle is reversing, if a vehicle enters the detection area of the blind spot monitor sensors and it is determined the vehicle will cross the path of this vehicle, the system alerts the driver by flashing the outer rear view mirror indicator lights and sounding the RCTA buzzer (blind spot monitor buzzer).

      A001LTIE01

  3. FUNCTION


    1. Blind Spot Monitor System On/Off Setting


      1. The blind spot monitor system and RCTA can be turned on or off via the setting screen displayed on the multi-information display.

        Tech Tips

        It is not possible to enable the RCTA function only.

      2. The BSM and RCTA indicator lights are located in the combination meter assembly so that the driver can see whether the blind spot monitor system and RCTA are on. When the system is on, the applicable indicator light illuminates.

  4. DIAGNOSIS


    1. The blind spot monitor system is equipped with a diagnosis function that can display warning messages in the multi-information display. For details, refer to the Repair Manual.