POWER DOOR LOCK CONTROL SYSTEM


  1. FUNCTION


    1. The power door lock control system has the following functions:

      Function Outline
      One-motion Open (Driver and Front Passenger Side) When the door is locked, this function enables the door to be unlocked by merely pulling the inside handle lever of the door.
      Key-linked Lock This function, which is linked with the key cylinder, can lock all the doors when a lock operation is performed.
      Manual Unlock Prohibition Function When the doors are all closed and are locked using a key-linked operation, wireless key operation or entry lock operation, unlocking the vehicle using the door control switch is prohibited.
      Key Confinement Prevention When electrical key transmitter is present in the interior detection area and a door lock operation is performed while the driver door is open, all the doors will be unlocked.
      Customization The on or off setting of some functions and settings can be performed using the Global TechStream (GTS). In addition, some functions are not available depending on the specification. For details, refer to the Repair Manual.
      Double Locking*1

      • The double locking system also prevents the doors from being opened through the operation of the inside door knobs. Thus, the doors cannot be opened either from the inside or outside of the vehicle.

      • To lock the doors with this system, press the transmitter lock button, then press it again within 5 seconds to activate the double locking system. However, as a backup, the driver door can be unlocked with the mechanical key.

      • The door outside handle touch sensor is touched 2 times within 5 seconds to activate the double locking system.*2

      Note

      Never activate the double locking system when there are people in the vehicle because the doors cannot be opened from the inside of the vehicle.

      *1: Models with double locking system

      *2: Models with entry function