REAR SUSPENSION SYSTEM


  1. CONSTRUCTION


    1. A lightweight hollow type rear stabilizer has been adopted to reduce weight.

    2. The stabilizer bar is connected to the rear axle carrier sub-assembly via ball joints. This enhances responsiveness during initial roll, ensuring good roll characteristics.

    3. Stabilizer bar bushes which have an inter-ring and a Teflon inner liner have been adopted. The deflection of the opening of the bush is suppressed by the inter-ring, therefore enhancing the response of the stabilizer bar, achieving both controllability and stability.

      A001M1HC01
      *1 Rear Stabilizer Link Assembly *2 Rear Stabilizer Bar
      *3 Rear Stabilizer Bar Bush *4 Inter-ring
      *5 Teflon Liner - -
      *a A-A Cross Section - -