REAR SUSPENSION SYSTEM


  1. CONSTRUCTION


    1. A low-pressure air sealed rear shock absorber assembly with a built-in rebound spring is used.

    2. A rebound spring is used to reduce roll angle and improve roll posture.

    3. A resin absorber cap is used to reduce weight.

    4. Spring insulators are provided at the top and bottom ends of the rear coil springs to ensure excellent vibration suppression.

    5. The spring rate of the coil spring is optimized to achieve excellent controllability and ride comfort.

      A001LT7C01
      *1 Rear Upper Coil Spring Insulator *2 Rear Lower Coil Spring Insulator
      *3 Rear Coil Spring *4 Absorber Cap
      *5 Piston Valve *6 Base Valve
      *7 Oil *8 Low-pressure Air
      *9 Oil Seal *10 Rebound Spring