INTAKE SYSTEM


  1. CONSTRUCTION


    1. The intake manifold is made of plastic to reduce the weight and the amount of heat transferred from the cylinder head sub-assembly. As a result, the intake air temperature is reduced and the volumetric efficiency is improved.

    2. A 1-2-4 branch structure, which the throttle body assembly location is centered to distribute air to each cylinder evenly, is used.

    3. An EGR distribution path with a tournament tree structure is built into the intake manifold.

      A001LZLC02
      *1 Intake Manifold *2 E.F.I. Vacuum Sensor Assembly
      *a EGR Port *b Purge Port
      *c PCV Port *d A-A Cross Section
      *e EGR Distribution Path - -