METER / GAUGE SYSTEM

Info Added 2017-04-18


  1. FUNCTION


    1. Buzzer


      1. The table below shows the warning and reminder functions of the buzzer in the combination meter assembly.

        Priority Item
        1 Simple Intelligent Parking Assist Indication Pattern 1 (Once)*1
        2 Simple Intelligent Parking Assist Indication Pattern 1 (Twice)*1
        3 Simple Intelligent Parking Assist Indication Pattern 2 (Once)*1
        4 Simple Intelligent Parking Assist Indication Pattern 2 (Twice)*1
        5 Simple Intelligent Parking Assist Indication Pattern 3 (Once)*1
        6 Entry and Start System Warning (Intermittent)*2
        7 Door Open when Shift Lever not in P Warning*2, *3
        8 Seat Belt Warning (Level 2) for Europe
        9 Seat Belt Warning (Level 1) for Europe
        10 Key Reminder*4
        11 Brake Fluid Low Warning
        12 EPS Warning (Intermittent)
        13 Engine Switch Operation while Driving Warning*2
        14 Vehicle Roll-away Notification Pattern 2
        15 Lane Departure Alert Warning*5
        16 Engine Stall Warning*2
        17 Vehicle Roll-away Notification Pattern 1
        18 Parking Brake Engaged Warning
        19 Speed Limit Exceed Warning*6
        20 Engine Stall Warning*4
        21 Warning Buzzer for Shift Lever in P Advice*2, *3
        22 Engine Oil Pressure Warning
        23 Door Open while Driving Warning
        24 Entry and Start System Warning (Intermittent, Maximum 9 Times)*2
        25 Stop and Start System Warning*7
        26 Road Sign Assist Indication*8
        27 Engine Start while Driving Notice
        28 Sport Shift Reject Warning*3
        29 Low Speed Zone Leading Vehicle Lost Warning*5
        30 Hands off Steering Wheel Warning*5
        31 Dynamic Radar Cruise Control Cancellation due to Low Speed Warning*5
        32 Lane Departure Alert System Cancel Warning*5
        33 Vehicle Sway Warning*5
        34 EPS Warning (Once)
        35 Engine Coolant Temperature Warning
        36 Multi-information Display Warning
        37 Engine Malfunction Warning
        38 Light Reminder
        39 Brake Hold Warning
        40 Entry and Start System Warning (Once)*2
        41 Immobiliser Certification Reminder*2
        42 Turn Signal/Hazard Warning Operation

        *1: Models with simple intelligent parking assist system

        *2: Models with entry and start system

        *3: Models with CVT

        *4: Models without entry and start system

        *5: Models with Toyota safety sense

        *6: Models with speed limiter control system

        *7: Models with stop and start system

        *8: Models with road sign assist system

    2. Multi-information Display


      1. Display Function Flow


        • The multi-information display can be switched as shown in the flow chart below:

          Figure 1. Models with TFT Color Multi-information Display

          B003XGAE01
          Item Display Change Condition
          *a Conditions are met.
          *b Conditions are not met.
          *c If there are multiple display requests, items will be displayed in sequence
          *d Item or display is selected by operating the steering pad switch
          *e After engine start
          *f The ending display is displayed for a certain period of time after the ignition switch is turned off.

        Figure 2. Models with TFT Monochrome Multi-information Display

        B003XFZE01
        Item Display Change Condition
        *a Conditions are met.
        *b Conditions are not met.
        *c If there are multiple display requests, items will be displayed in sequence
        *d Item or display is selected by operating the steering pad switch
        *e After ignition switch ON.
        *f The ending display is displayed for a certain period of time after the ignition switch is turned off.

      2. Display Tab Operation (Models with TFT Color Multi-information Display)


        • The information currently displayed can be switched using the RIGHT/LEFT switch of the steering pad switch assembly.

          B003XHRC01
          *A Models with Navigation System *B Models with Display Audio System
          *C Models with Toyota Safety Sense - -
          *1 Steering Pad Switch Assembly - -
          *a LEFT Switch *b RIGHT Switch
          *c Drive Information Tab *d Navigation Information Tab
          *e Audio Information Tab *f Driving Assist System Information Tab
          *g Warning Message Tab *h Setting Tab
          *i The illustrations shown are examples only. The illustrations may differ from the actual vehicle screen. - -
          B003XH4 RIGHT switch operation B003XF2 LEFT switch operation

      3. Drive Information (Models with TFT Color Multi-information Display)


        • The drive information tab shows vehicle information such as drivable range and fuel consumption.

        • The drive information display can be changed using the UP/DOWN switch of the steering pad switch assembly.

          B003XG8C01
          *A Models with Stop and Start System *B Models with CVT
          *C AWD Models *D 2WD Models
          *E Models with Toyota Safety Sense - -
          *1 Steering Pad Switch Assembly - -
          *a UP Switch *b DOWN Switch
          *c Drive Information 1 *d Drive Information 2
          *e Drive Information 3 *f Eco Driving Indicator Zone Display
          *g Digital Vehicle Speed and Cruising Range Display *h AWD Control Display
          *i G Monitor *j Vehicle Sway Warning Display
          *k Blank *l The illustrations shown are examples only. The illustrations may differ from the actual vehicle screen.
          B003XH4 DOWN switch operation B003XF2 UP switch operation

      4. Drive Information (Models with TFT Monochrome Multi-information Display)


        • The drive information tab shows vehicle information such as drivable range and fuel consumption.

        • The drive information can be switched using the DISP switch on the steering pad switch assembly.

          B003XG9C01
          *A Models with Toyota Safety Sense - -
          *1 Steering Pad Switch Assembly - -
          *a DISP Switch *b Average Fuel Consumption / Instantaneous Fuel Consumption
          *c Cruising Range *d Average Vehicle Speed after Engine Start-up
          *e Driving Time after Engine Start-up *f Driving Assist System Setting
          *g Setting *h Driving Assist System Information
          *i Warning Message *j The illustrations shown are examples only. The illustrations may differ from the actual vehicle screen.

      5. Setting Function


        • On models with TFT color multi-information display, the items displayed on the multi-information display can be customized.

        • The following items can be selected on the information setting screen.

          Lane Departure Alert System (Models with Toyota safety sense)
          Item Available Setting
          Steering Assist

          • Setting for steering assist can be set to on/off:


            • On

            • Off
          Warning Sensitivity

          • Alert sensitivity of alert system can be changed:


            • High

            • Standard
          Vehicle Sway Warning

          • Vehicle sway warning can be selected:


            • On

            • Off
          Vehicle Sway Warning Sensitivity

          • Vehicle sway warning sensitivity can be selected:


            • High

            • Standard

            • Low
          Pre-collision System (Models with Toyota safety sense)
          Item Available Setting
          PCS

          • The pre-collision system can be set to on/off:


            • On

            • Off
          The pre-collision system warning timing

          • The pre-collision system warning timing can be selected:


            • Far (Icon is displayed)

            • Middle (Icon is displayed)

            • Near (Icon is displayed)
          Blind Spot Monitor System (Models with Blind Spot Monitor System)
          Item Available Setting
          BSM

          • The blind spot monitor system can be set to on/off:


            • ON

            • OFF
          RCTA

          • The RCTA function can be set to on/off:


            • ON

            • OFF

          Tech Tips

          Setting can only be changed when blind spot monitor system is ON.
          TOYOTA Parking Assist-sensor System (Models with TOYOTA parking assist-sensor system)
          Item Available Setting
          TOYOTA Parking Assist-sensor System

          • The TOYOTA parking assist-sensor system can be set to on/off:


            • ON

            • OFF
          Road Sign Assist (Models with road sign assist system)
          Item Available Setting
          Road Sign Assist

          • The road sign assist system can be set to on/off:


            • ON

            • OFF
          Drive Mode
          Item Available Setting
          Drive Mode

          • The drive mode can be changed:


            • SPORT

            • NORMAL

            • ECO
          Instrument Panel Light
          Item Available Setting
          Display Brightness Select to adjust brightness of the instrument panel light.
          Vehicle settings
          Item Available Setting
          Road Sign Assist Setup*1 Notification Method

          • Select to change the notification method of the following warnings between No Notification, Only Visual and Visual and Audible:


            • Excess Speed


              • Warns the driver if the vehicle exceeds the speed on the speed limit sign displayed on the multi-information display.

            • Others


              • Warns the driver if the system determines that the vehicle is overtaking when a no overtaking sign is displayed on the multi-information display.
          Notification Level

          • Select to set the speed threshold over which the excess speed warning starts to operate when a speed limit sign is displayed on the multi-information display.


            • 2 km/h (1 mph)

            • 5 km/h (3 mph)

            • 10 km/h (5 mph)
          Stop & Start Setup*2

          • The idling stop time of stop and start system can be selected:


            • Standard

            • Extended
          TPMS Setup*3 The tire pressure monitor system can be initialized.

          *1: Models with road sign assist system

          *2: Models with stop and start system

          *3: Models with tire pressure warning system

          Meter Settings
          Item Available Setting
          Language

          • The language used on the multi-information display can be selected:


            • English (Default)

            • German

            • French

            • Spanish

            • Italian

            • Portuguese

            • Dutch

            • Swedish

            • Norwegian

            • Danish

            • Russian

            • Finnish

            • Greek

            • Polish

            • Ukrainian

            • Turkish

            • Hungarian

            • Czech

            • Slovak

            • Romanian
          Unit

          • The unit displayed on the multi-information display can be selected:


            • km (km/L)

            • km (L/100 km)

            • miles (MPG)
          Eco Driving Indicator Light*1

          • The Eco Driving Indicator Light can be switched:


            • ON (Default)

            • OFF
          Drive Information 1

          • 2 items can be selected among the following:


            • Current Fuel Consumption (Bar Display) (Default of upper area)

            • Current Fuel Consumption (Value Display)

            • Total Average Fuel Consumption between Rest Operations (Default of lower area)

            • Average Fuel Consumption after Engine Startup

            • Average Fuel Consumption after Refueling

            • Total Average Vehicle Speed between Reset Operations

            • Average Vehicle Speed after Engine Start-up

            • Total Elapsed Time between Reset Operations

            • Elapsed Time after Engine Start-up

            • Cruising Range

            • Cruising Range after Engine Start-up

            • Blank
          Drive Information 2

          • 2 items can be selected among the following:


            • Current Fuel Consumption (Bar Display)

            • Current Fuel Consumption (Value Display)

            • Total Average Fuel Consumption between Rest Operations

            • Average Fuel Consumption after Engine Startup

            • Average Fuel Consumption after Refueling

            • Total Average Vehicle Speed between Reset Operations (Default of lower area)

            • Average Vehicle Speed after Engine Start-up

            • Total Elapsed Time between Reset Operations

            • Elapsed Time after Engine Start-up

            • Cruising Range (Default of upper area)

            • Cruising Range after Engine Start-up

            • Blank
          Drive Information 3*2

          • 2 items can be selected among the following:


            • Total Stop and Start Operation Time between Rest Operations

            • Stop and Start Operation Time after Engine Start-up

            • Total Amount of Saving Fuel between Reset Operations

            • Amount of Saving Fuel after Engine Start-up

            • Blank
          Interruption Display

          • The following displays that appear as soon as the set conditions are met can be switched to ON (Default) or OFF:


            • Stop and Start Operation Time*2

            • Stop and Start System Status*2

            • Incoming Telephone Display*3
          Initialization The set items can be initialized.

          *1: Models with CVT

          *2: Models with stop and start system

          *3: Models with display audio system

        • On models with TFT Monochrome multi-information display, pressing and holding the DISP switch of the steering pad switch assembly when the setting screen for drive information is displayed changes the display to the customization screen.

          Lane Departure Alert System (Models with Toyota safety sense)
          Item Available Setting
          Steering Assist

          Setting for steering assist can be set to on/off:


          • - On

          • - Off
          Warning Sensitivity

          Alert sensitivity of alert system can be changed:


          • - High

          • - Standard
          Vehicle Sway Warning

          Vehicle sway warning can be selected:


          • - On

          • - Off
          Vehicle Sway Warning Sensitivity

          Vehicle sway warning sensitivity can be selected:


          • - High

          • - Standard

          • - Low
          Pre-collision System (Models with Toyota safety sense)
          Item Available Setting
          PCS

          The pre-collision system can be set to on/off:


          • - On

          • - Off
          The pre-collision system warning timing

          The pre-collision system warning timing can be selected:


          • - Far

          • - Middle

          • - Near
          Meter Settings
          Item Available Setting
          Language

          The language used on the multi-information display can be selected:


          • - English

          • - French

          • - German

          • - Spanish

          • - Italian

          • - Portuguese

          • - Russian
          Unit

          The unit displayed on the multi-information display can be selected:


          • - km (km/L)

          • - km (L/100 km)

          • - miles (MPG)

      6. Warning Mode Function


        • When a warning is necessary, the warning display interrupts the current display on the multi-information display.

        • The master warning light may illuminate or blink and the buzzer in the combination meter assembly may sound depending on the item displayed on the multi-information display.

        Models with TFT Color Multi-information Display
        Priority Display Master Warning Light Buzzer
        1 4WD(AWD) TEST MODE*1 - -
        ADJUSTING LDA CAMERA*2 - -
        ADJUSTING FRONT RADAR BEAM*2 - -
        ADJUSTING FRONT RADAR BEAM ERROR*2 - -
        ADJUSTING FRONT RADAR BEAM ALONG VERTICAL AXIS*2 - -
        ADJUSTING FRONT RADAR BEAM ALONG HORIZONTAL AXIS*2 - -
        CHECKING CRUISE CONTROL BRAKE*2 - -
        CHECKING PRE-CRASH BRAKE*2 - -
        BRAKE!*2 - -
        Push and Hold ENGINE Switch for Emergency Stop*3 Blinks -
        Shift to N Position & Push ENGINE Switch to Restart*3, *4 Blinks -
        Depress Clutch Pedal & Push ENGINE Switch to Restart*3, *5 Blinks -
        Engine Stopped. Shift to P Position*3, *4 Blinks -
        Engine Stopped. Stop in a Safe Place.*3 Blinks -
        2 Dynamic radar cruise control warning reminder indicator (image display)*2 - -
        Lane departure alert warning reminder indicator (image display)*2 - -
        Braking Power Low. Stop in a Safe Place, See Owner's Manual. Blinks Sounds
        3 IPA Cancelled, Take Over. IPA Malfunction.*6 - Sounds
        IPA Cancelled, Take Over.*6 - Sounds
        IPA Space Not Detected, Speed Too High.*6 - Sounds
        IPA Cancelled, Take Over. Speed Too High.*6 - Sounds
        IPA Cancelled, Take Over. Driver Intervened.*6 - Sounds
        IPA Cancelled, Take Over. TRC/VSC is Off.*6 - Sounds
        IPA Cancelled, Take Over. TRC/ABS/VSC Activated.*6 - Sounds
        IPA Cancelled, Take Over. Timeout.*6 - Sounds
        IPA Unavailable, Parking Space Too Short.*6 - Sounds
        IPA Cancelled, Take Over. Parking Space Too Short.*6 - Sounds
        IPA Cancelled. Approached Obstacle in Front, Shift into R.*4, *6 - Sounds
        IPA Cancelled. Approached Obstacle at Rear, Shift into D.*4, *6 - Sounds
        IPA Cancelled, Take Over. ICS Activated.*6 - Sounds
        IPA Unavailable, Speed Too High.*6 - Sounds
        IPA Unavailable, TRC/VSC is Off.*6 - Sounds
        IPA Malfunction. Visit Your Dealer.*6 Illuminates Sounds
        IPA Unavailable.*6 Illuminates Sounds
        IPA Unavailable. Stop The Vehicle, Turn Steering Wheel from Left End to Right End.*6 - Sounds
        System Not Ready*6 - Sounds
        Push IPA-SW*6 - Sounds
        Memory Error*6 - Sounds
        Write Zero-Point of Steering Angle*6 - Sounds
        Write Maximum Steering Angle*6 - Sounds
        End of Adjustment*6 - Sounds
        4 Shift to P Before Exiting Vehicle.*3, *4 Blinks Sounds
        Door open while driving (image display) Blinks Sounds
        Door open (image display) - -
        Clearance sonar detection (image display)*6 - -
        Parking Assist Malfunction*6 Illuminates Sounds
        Clean Parking Assist Sensor (image display)*6 Illuminates Sounds
        5 Auto Power Off to Conserve Battery. - -
        6 Power Steering Malfunction. Steering Power Low. Visit Your Dealer. Blinks Sounds
        Power Steering Malfunction. Steering Power Low. Visit Your Dealer. Illuminates Sounds
        Abnormal Voltage. Steering Power Low. Visit Your Dealer. Blinks Sounds
        Abnormal Voltage. Steering Power Low. Visit Your Dealer. Illuminates Sounds
        Power Steering Malfunction. Visit Your Dealer. Illuminates Sounds
        Stop & Start System Malfunction. Visit Your Dealer.*7 Illuminates Sounds
        EPB Applied. Blinks Sounds
        Vehicle May Roll Out. Shift to P.*4 Blinks Sounds
        Brake Hold Fault. Depress Brake to Deactivate. Visit Your Dealer. Illuminates Sounds
        Brake Hold Warning. Depress Brake on Slope Blinks Sounds
        EPB Activation Incomplete. Blinks Sounds
        Key Not Detected, Check Key Location.*3 - Sounds
        EPB Release Unavailable, Depress Brake Pedal for EPB Release. Blinks Sounds
        Release Accelerator. Blinks Sounds
        7 LDA. Driver Attention Required.*2 Illuminates Sounds
        LDA. Hold Steering Wheel.*2 - -
        LDA Steering Assist Unavailable, Hold Steering Wheel.*2 Illuminates Sounds
        LDA. Hold Steering Wheel.*2 Illuminates Sounds
        EPB Frequently Operated, Wait a Minute. Blinks Sounds
        8 Check Engine. Visit Your Dealer. Illuminates Sounds
        Check Engine. Reduced Engine Power. Visit Your Dealer. Illuminates Sounds
        Reduced Engine Power. Visit Your Dealer. Illuminates Sounds
        Engine Maintenance Required. Visit Your Dealer. Illuminates Sounds
        Engine Stopped. Stop in a Safe Place. Blinks Sounds
        Engine Stopped. Shift to P.*4 Illuminates Sounds
        Engine Stopped. Shift to N.*4 Illuminates Sounds
        Strongly Depress Brake And Then Start Engine. Illuminates Sounds
        Depress Brake and Then Start Engine.*4 - Sounds
        Depress Clutch and Then Start Engine.*5 - Sounds
        Antilock Brake System Malfunction. Visit Your Dealer. - Sounds
        Engine Coolant Temperature High. Stop in a Safe Place. See Owner's Manual. - Sounds
        Vehicle May Roll Out. Park The Vehicle on Flat Road. Blinks Sounds
        Charging System Malfunction. Stop in a Safe Place. See Owner's Manual. Illuminates -
        Clean Radar Sensor.*2 Illuminates Sounds
        Cruise Control unavailable.*2 Illuminates Sounds
        Cruise Control Unavailable. Depress The Brake Pedal.*2 - -
        Cruise Control Off. Shifted to P Position. Depress The Brake Pedal and Shift to D to Restart.*2, *4 - Sounds
        LDA Unavailable.*2 Illuminates Sounds
        Entry & Start System Malfunction. See Owner's Manual.*2 Illuminates Sounds
        Blind Spot Monitor Unavailable.*8 Illuminates Sounds
        Check Cruise Control System. Visit Your Dealer.*9 Illuminates Sounds
        Check Cruise Control System. Depress The Brake Pedal. Visit Your Dealer.*9 Illuminates Sounds
        Check Speed Limiter System.*10 Illuminates Sounds
        Lane Departure Alert Malfunction. Visit Your Dealer.*2 Illuminates Sounds
        Front Camera Unavailable.*2 Illuminates Sounds
        LDA ON. Steering Assist Active.*2 - -
        LDA ON. Steering Assist Inactive.*2 - -
        Front Camera Vision Blocked. Clean and Demist Windshield.*2 Illuminates Sounds
        Pre-Collision System Malfunction. Visit Your Dealer.*2 Illuminates Sounds
        Blind Spot Monitor System Malfunction. Visit Your Dealer.*8 Illuminates Sounds
        Engine Oil Pressure Low. Illuminates Sounds
        AWD System Malfunction. 2WD Mode Engaged Visit Your Dealer.*1 Illuminates Sounds
        EPB Unavailable. Illuminates Sounds
        Check RSA System.*11 Illuminates Sounds
        EPB Malfunction. Visit Your Dealer. Illuminates Sounds
        Use on Expressway Only. Beware of Stopping or Merging Vehicles!*2 - -
        LDA Unavailable Below Approx. 50 km/h.*2 - -
        LDA Unavailable Below Approx. 32 MPH.*2 - -
        LDA Unavailable at Current Speed.*2 - -
        9 Dynamic radar cruise control (image display)*2 - -
        Lane departure alert (image display)*2 - -
        Engine Stopped. Steering Power Low. Illuminates Sounds
        Turn Power Off.*3 Blinks Sounds
        Would You Like To Take A Rest?*2 - Sounds
        Please Take A Rest.*2 - Sounds
        Key Detected in Vehicle.*3 - -
        Turn Lights Off. Blinks Sounds
        Window Open. Blinks Sounds
        Depress Brake Pedal and Touch ENGINE Switch with Key.*3, *4 - Sounds
        Depress Clutch Pedal and Touch ENGINE Switch with Key.*3, *5 - Sounds
        Stop & Start System Active. Shift to N and Depress Clutch to Restart.*7 Blinks -
        Not Ready to Drive. Depress Brake Pedal & Push ENGINE Switch to Start.*3, *4 - -
        Not Ready to Drive.*3, *5 - -
        Depress Brake Pedal & Push ENGINE Switch to Start.*3, *4 - -
        Depress Clutch Pedal & Push ENGINE Switch to Start.*3, *5 - -
        Push ENGINE Switch while Turning The Steering Wheel in Either Direction.*3 Blinks Sounds
        10 Brake Hold Malfunction. Visit Your Dealer. Illuminates Sounds
        Brake Hold Less Effective during Icy Conditions. - -
        Brake Hold Active. Depress Brake and Switch to Deactivate. - Sounds
        Brake Hold Unavailable. Driver Door Open. - Sounds
        EPB Can't be Released. Close Door and Fasten Your Seatbelt. Blinks Sounds
        Brake Hold Unavailable. Driver Seat Belt Unbuckled. - Sounds
        Brake Hold Unavailable. Hood or Trunk Open. - Sounds
        Depress Brake to Maintain Brake Hold. - Sounds
        Close Driver Door to Maintain Brake Hold. - Sounds
        Fasten Driver Seat Belt to Maintain Brake Hold. - Sounds
        Brake System Overheated. Brake Hold Unavailable. - Sounds
        EPB Automatically Applied. Blinks Sounds
        AWD System Overheated. 2WD Mode Engaged.*1 Blinks Sounds
        AWD System Overheated. Switching to 2WD Mode.*1 Blinks Sounds
        Drive-Start Control Malfunction. Visit Your Dealer. Illuminates Sounds
        Brake Override Malfunction. Visit Your Dealer. Illuminates Sounds
        11 Key Battery Low. Replace Key Battery.*3 - Sounds
        Engine Oil Level Low. Add or Replace Oil. - -
        Headlight System Malfunction. Visit Your Dealer.*12 Illuminates Sounds
        Accelerator and Brake Pedals Depressed Simultaneously. Blinks -
        12 Low Washer Fluid.*13 - -
        Traction Control Turned OFF. - -
        Oil Maintenance Required Soon.*14 - -
        Oil Maintenance Required Visit Your Dealer.*14 - -
        To Activate AHB, Switch Headlights to High Beam.*2 - -
        Resetting Oil Maintenance Data.*14 - -
        Resetting of Oil Maintenance Data Incomplete.*14 - -
        Depress Brake Pedal & Push ENGINE Switch to Start.*3, *4 - -
        Depress Clutch Pedal & Push ENGINE Switch to Start.*3, *5 - -
        VSC Turned Off. Pre-Collision Brake System Unavailable.*2 - -
        Pre-Collision System Unavailable.*2 - -
        Front Camera Unavailable.*2 - -
        Front Camera Vision Blocked. Clean and Demist Windshield.*2 - -
        Pre-Collision System Unavailable. Clean Sensor.*2 - -
        Theft Sensor Turned Off.*15 - -
        Theft Sensor Turned On.*15 - -
        iMT System Malfunction. Visit Your Dealer.*5 Illuminates -
        Depress The Accelerator Pedal When Starting Off.*5 - -
        EPB Shift Interlock Function Activated. - Sounds
        EPB Shift Interlock Function Deactivated. - Sounds
        Pre-Collision System Off.*2 - -
        Balances Stop & Start & A/C Output.*7 - -
        Prolongs Stop & Start & Reduces A/C Output.*7 - -
        Stop & Start Extended.*7 - -
        Stop & Start Standard.*7 - -
        13 A New Key has been Registered. Contact Your Dealer for Details.*3 - -

        *1: AWD models

        *2: Models with Toyota safety sense

        *3: Models with entry and start system

        *4: Models with CVT

        *5: Models with manual transaxle

        *6: Models with Toyota parking assist-sensor system

        *7: Models with stop and start system

        *8: Models with blind spot monitor system

        *9: Models with cruise control system

        *10: Models with speed limiter control system

        *11: Models with road sign assist system

        *12: Models with LED headlight system

        *13: Models with washer fluid level warning system

        *14: Models with 8NR-FTS engine

        *15: Models with intrusion sensor (theft warning ultrasonic sensor)

        Models with TFT Monochrome Multi-information Display
        1 ADJUSTING LDA CAMERA*1 - -
        ADJUSTING FRONT RADAR BEAM*1 - -
        ADJUSTING FRONT RADAR BEAM ERROR*1 - -
        ADJUSTING FRONT RADAR BEAM ALONG VERTICAL AXIS*1 - -
        ADJUSTING FRONT RADAR BEAM ALONG HORIZONTAL AXIS*1 - -
        CHECKING CRUISE CONTROL BRAKE*1 - -
        CHECKING PRE-CRASH BRAKE*1 - -
        BRAKE!*1 - -
        2 Dynamic radar cruise control warning reminder indicator (image display)*1 - -
        Lane departure alert warning reminder indicator (image display)*1 - -
        BRAKING POWER LOW STOP IN A SAFE PLACE SEE OWNER'S MANUAL Blinks Sounds
        3 Door open while driving (image display) Blinks Sounds
        Door open (image display) - -
        4 POWER STEERING MALFUNCTION STEERING POWER LOW VISIT YOUR DEALER Blinks Sounds
        POWER STEERING MALFUNCTION STEERING POWER LOW VISIT YOUR DEALER Illuminates Sounds
        ABNORMAL VOLTAGE STEERING POWER LOW VISIT YOUR DEALER Blinks Sounds
        ABNORMAL VOLTAGE STEERING POWER LOW VISIT YOUR DEALER Illuminates Sounds
        POWER STEERING MALFUNCTION VISIT YOUR DEALER Illuminates Sounds
        EPB APPLIED Blinks Sounds
        BRAKE HOLD FAULT DEPRESS BRAKE TO DEACTIVATE VISIT YOUR DEALER Illuminates Sounds
        BRAKE HOLD WARNING DEPRESS BRAKE ON SLOPE Blinks Sounds
        EPB ACTIVATION INCOMPLETE Blinks Sounds
        EPB RELEASE UNAVAILABLE DEPRESS BRAKE PEDAL FOR EPB RELEASE Blinks Sounds
        RELEASE ACCELERATOR Blinks Sounds
        5 LDA DRIVER ATTENTION REQUIRED*1 Illuminates Sounds
        LDA HOLD STEERING WHEEL*1 - -
        LDA STEERING ASSIST UNAVAILABLE HOLD STEERING WHEEL*1 Illuminates Sounds
        LDA HOLD STEERING WHEEL*1 Illuminates Sounds
        EPB FREQUENTLY OPERATED WAIT A MINUTE Blinks Sounds
        6 CHECK ENGINE VISIT YOUR DEALER Illuminates Sounds
        CHECK ENGINE REDUCED ENGINE POWER VISIT YOUR DEALER Illuminates Sounds
        ENGINE MAINTENANCE REQUIRED VISIT YOUR DEALER Illuminates Sounds
        ENGINE STOPPED STOP IN A SAFE PLACE Blinks Sounds
        FIRMLY DEPRESS BRAKE AND THEN START ENGINE Illuminates Sounds
        DEPRESS CLUTCH AND THEN START ENGINE - Sounds
        ANTILOCK BRAKE SYSTEM MALFUNCTION VISIT YOUR DEALER - Sounds
        ENGINE COOLANT TEMP HIGH - Sounds
        VEHICLE MAY ROLL PARK THE VEHICLE ON FLAT ROAD Blinks Sounds
        CHARGING SYSTEM MALFUNCTION Illuminates -
        CLEAN RADAR SENSOR*1 Illuminates Sounds
        CRUISE CONTROL UNAVAILABLE*2 Illuminates Sounds
        CRUISE CONTROL UNAVAILABLE DEPRESS THE BRAKE PEDAL*1 - -
        LDA UNAVAILABLE*1 Illuminates Sounds
        CHECK CRUISE CONTROL SYSTEM VISIT YOUR DEALER*2 Illuminates Sounds
        CHECK CRUISE CONTROL SYSTEM DEPRESS THE BRAKE PEDAL VISIT YOUR DEALER*2 Illuminates Sounds
        CHECK SPEED LIMITER SYSTEM*3 Illuminates Sounds
        LANE DEPARTURE ALERT MALFUNCTION VISIT YOUR DEALER*1 Illuminates Sounds
        LDA ON STEERING ASSIST ACTIVE*1 - -
        LDA ON STEERING ASSIST INACTIVE*1 - -
        FRONT CAMERA VISION BLOCKED CLEAN AND DEMIST WINDSHIELD*1 Illuminates Sounds
        PRE-COLLISION SYSTEM MALFUNCTION VISIT YOUR DEALER*1 Illuminates Sounds
        ENGINE OIL PRESSURE LOW Illuminates Sounds
        EPB UNAVAILABLE Illuminates Sounds
        EPB MALFUNCTION VISIT YOUR DEALER. Illuminates Sounds
        USE ON MOTORWAY ONLY BEWARE OF STOPPING OR MERGING VEHICLES!*2 - -
        LDA UNAVAILABLE BELOW APPROX 50 KM/H*1 - -
        LDA UNAVAILABLE BELOW APPROX 32 MPH*1 - -
        LDA UNAVAILABLE AT CURRENT SPEED*1 - -
        7 Dynamic radar cruise control (image display)*1 - -
        Lane departure alert (image display)*1 - -
        ENGINE STOPPED STEERING POWER LOW Illuminates -
        WOULD YOU LIKE TO TAKE A REST?*1 - -
        PLEASE TAKE A REST - -
        TURN LIGHTS OFF Blinks Sounds
        WINDOW OPEN Blinks Sounds
        8 BRAKE HOLD MALFUNCTION VISIT YOUR DEALER Illuminates Sounds
        BRAKE HOLD LESS EFFECTIVE DURING ICY CONDITIONS - -
        BRAKE HOLD ACTIVE DEPRESS BRAKE AND SWITCH TO DEACTIVATE - Sounds
        BRAKE HOLD UNAVAILABLE DRIVER DOOR OPEN - Sounds
        EPB CAN'T BE RELEASED CLOSE DOOR AND FASTEN YOUR SEATBELT Blinks Sounds
        BRAKE HOLD UNAVAILABLE DRIVER SEAT BELT UNBUCKLED - Sounds
        BRAKE HOLD UNAVAILABLE HOOD OR TRUNK OPEN - Sounds
        DEPRESS BRAKE TO MAINTAIN BRAKE HOLD - Sounds
        CLOSE DRIVER DOOR TO MAINTAIN BRAKE HOLD - Sounds
        FASTEN DRIVER SEAT BELT TO MAINTAIN BRAKE HOLD - Sounds
        BRAKE SYSTEM OVERHEATED BRAKE HOLD UNAVAILABLE - Sounds
        EPB AUTOMATICALLY APPLIED Blinks Sounds
        DRIVE-START CONTROL MALFUNCTION VISIT YOUR DEALER Illuminates Sounds
        BRAKE OVERRIDE MALFUNCTION VISIT YOUR DEALER Illuminates Sounds
        9 ENGINE OIL LEVEL LOW ADD OR REPLACE OIL - -
        HEADLIGHT SYSTEM MALFUNCTION VISIT YOUR DEALER*1 Illuminates Sounds
        ACCELERATOR AND BRAKE PEDALS DEPRESSED SIMULTANEOUSLY Blinks -
        10 LOW WASHER FLUID*4 - -
        TRACTION CONTROL TURNED OFF - -
        OIL MAINTENANCE REQUIRED SOON - -
        OIL MAINTENANCE REQUIRED VISIT YOUR DEALER - -
        TO ACTIVATE AHB, SWITCH HEADLIGHTS TO HIGH BEAM*1 - -
        RESETTING OIL MAINTENANCE DATA - -
        RESETTING OF OIL MAINTENANCE DATA INCOMPLETE - -
        VSC TURNED OFF PRE-COLLISION BRAKE SYSTEM UNAVAILABLE*1 - -
        PRE-COLLISION SYSTEM UNAVAILABLE*1 - -
        FRONT CAMERA UNAVAILABLE*1 - -
        FRONT CAMERA VISION BLOCKED CLEAN AND DEMIST WINDSHIELD*1 - -
        PRE-COLLISION SYSTEM UNAVAILABLE*1 - -
        PRE-COLLISION SYSTEM UNAVAILABLE CLEAN SENSOR*1 - -
        THEFT SENSOR TURNED OFF*5 - -
        THEFT SENSOR TURNED ON*5 - -
        IMT SYSTEM MALFUNCTION VISIT YOUR DEALER Illuminates -
        DEPRESS THE ACCELERATOR PEDAL WHEN STARTING OFF - -
        EPB SHIFT INTERLOCK FUNCTION ACTIVATED - Sounds
        EPB SHIFT INTERLOCK FUNCTION DEACTIVATED - Sounds
        PRE-COLLISION SYSTEM OFF* - -

        *1: Models with Toyota safety sense

        *2: Models with cruise control system

        *3: Models with speed limiter control system

        *4: Models with washer fluid level warning system

        *5: Models with intrusion sensor (theft warning ultrasonic sensor)

  2. OPERATION


    1. Eco Driving Indicator Light and Eco Driving Indicator Zone Display (Models with CVT)


      1. The following table shows the operation of Eco Driving Indicator Light and Eco Driving indicator zone display in different driving conditions:

        Driving Condition Eco Driving Indicator Light Eco Driving Indicator Zone Display
        While Stopped Turns off B003XHF
        While Eco Driving Turns on B003XG2
        While Non-eco Driving Turns off B003XHC

        When any of the following conditions is met, operation is stopped.


        • Ignition switch off

        • Engine stopped.

        • Shift lever is not in D.

        • Normal or Eco mode is not selected.

        • The vehicle is being driven at a speed of 130 km/h (81 mph) or higher.

        		 Turns off B003XF9