LIGHTING SYSTEM


  1. FUNCTION


    1. The illuminated entry system has the following functions:

      Function Outline Lights that Operate
      Actuation Area-linked*1

      • When a registered key enters any actuation area around the doors, the lights that operate turn on.

      • When a registered key leaves all of the actuation areas around the doors, the lights that operate turn off.

      • Map Light Assembly*2

      • Dome Light*3
      Door Lock/Unlock-linked

      • When any door is unlocked, the lights that operate turn on.

      • When all doors are locked, the lights that operate turn off.

      • Engine Switch Illumination*1

      • Map Light Assembly*2

      • Dome Light*3

      • Front Door Trim Illumination*4

      • Cup Holder Illumination*5
      Door Open/Close-linked When any door is opened, the lights that operate turn on.

      • Engine Switch Illumination*1

      • Map Light Assembly*2

      • Dome Light*3

      • Front Door Trim Illumination*4

      • Cup Holder Illumination*5
      When all doors are closed, the lights that operate turn off.

      • Engine Switch Illumination*1

      • Map Light Assembly*2

      • Dome Light*3
      Power Source-linked When the ignition switch is turned from ACC or IG to off, the lights that operate turn on.

      • Engine Switch Illumination*1

      • Map Light Assembly*2

      • Dome Light*3
      When the ignition switch is changed from off to ACC or ON, the lights that operate turn off. Engine Switch Illumination*1
      Illumination Light Control Function

      The lights operate dim when all of the following conditions are met:


      • The ignition switch is ON.

      • All doors are closed.

      • The shift lever is moved from P to any other position.*6

      • The parking brake is released.*7

      • The vehicle speed is more than 3 km/h (1.86 mph)*7

      • Engine Switch Illumination*1, *10

      • Front Door Trim Illumination*4

      • Cup Holder Illumination*5
      Delay

      When approximately 15 seconds elapse after the following condition is met, the lights that operate turn off:


      • An actuation area-linked function is operated.

      • Map Light Assembly*2

      • Dome Light*3

      When approximately 15 seconds elapse after the following condition is met, the lights that operate turn off:


      • A power source-linked function is used.

      • Map Light Assembly*2

      • Dome Light*3

      • Front Door Trim Illumination*4

      • Cup Holder Illumination*5

      When approximately 15 seconds elapse after either of the following conditions is met, the lights that operate turn off:


      • The door unlock-linked function is operated.

      • Any door is opened and then all doors are closed when the ignition switch is off.

      • Map Light Assembly*2

      • Dome Light*3

      • Front Door Trim Illumination*4

      • Cup Holder Illumination*5

      When approximately 40 seconds elapse after the following condition is met, the lights that operate turn off:


      • Any door is opened and then all doors are closed when the ignition switch is off.

      		 Engine Switch Illumination*1
      Battery Saving

      • When 20 minutes elapse after the ignition switch is turned from ACC or IG to off and the lights that operate remain on, the lights are turned off.

      • The battery saving function is canceled when any of the following operations is performed before the lights are turned off by the function. After the operation is performed, the lights remain on for another 20 minutes and then the lights are turned off.


        • The ignition switch is turned to ACC or IG.

        • Any door is opened and closed.

        • The back door is opened and closed.

        • Any door is unlocked.

        • The key enters any exterior actuation area.*1

      • Engine Switch Illumination*1

      • Map Light Assembly*2

      • Dome Light*3

      • Vanity Light Assembly *8

      • No. 1 Luggage Compartment Light Assembly*9
      Interior Light Auto Cut Function

      • When 20 minutes elapse after the ignition switch is turned from ACC or IG to off and the lights that operate remain on, the lights are turned off.

      • The interior light auto cut function is canceled when any of the following operations is performed before the lights are turned off by the function. After the operation is performed, the lights remain on for another 20 minutes and then the lights are turned off.


        • The ignition switch is turned to ACC or IG.

      • Map Light Assembly*2

      • Dome Light*3

      • Vanity Light Assembly *8

      • No. 1 Luggage Compartment Light Assembly*9

      *1: Models with entry and start system

      *2: Models with map light assembly

      *3: Models with dome light

      *4: Models with front door trim illumination

      *5: Models with cup holder illumination

      *6: Models with CVT

      *7: Models with manual transaxle

      *8: Models with vanity light assembly

      *9: Models with No. 1 luggage compartment light assembly

      *10: RHD Models