DRIVE SHAFT SYSTEM

Info Added 2017-04-18


  1. OUTLINE


    1. Front Drive Shaft


      1. A tripod type Constant-Velocity Joint (CVJ) is used on the front differential side, and a Rzeppa type CVJ is used on the front axle side.

      2. A front drive shaft damper is provided to reduce vibration and noise.

      3. A hollow shaft is used for the front drive shaft assembly RH to ensure high rigidity while reducing weight. (2WD Models with 8NR-FTS Engine)

        Figure 1. 2WD Models with 8NR-FTS Engine (except Australia Models)

        A001MJDC01
        *1 Rzeppa Type CVJ *2 Front Drive Shaft Damper
        *3 Tripod Type CVJ *4 Front Drive Shaft Assembly LH
        *5 Front Drive Shaft Assembly RH - -
        B003XF2 Front Axle Side B003XH4 Front Differential Side

        Figure 2. AWD Models with 8NR-FTS Engine (except Australia Models)

        A001MMHC01
        *1 Rzeppa Type CVJ *2 Front Drive Shaft Damper
        *3 Tripod Type CVJ *4 Front Drive Shaft Assembly LH
        *5 Front Drive Shaft Assembly RH - -
        B003XF2 Front Axle Side B003XH4 Front Differential Side

        Figure 3. 2WD Models with 8NR-FTS Engine (Australia Models)

        A001MMXC01
        *1 Rzeppa Type CVJ *2 Front Drive Shaft Damper
        *3 Tripod Type CVJ *4 Front Drive Shaft Assembly LH
        *5 Front Drive Shaft Assembly RH - -
        B003XF2 Front Axle Side B003XH4 Front Differential Side

        Figure 4. AWD Models with 8NR-FTS Engine (Australia Models)

        A001MSWC01
        *1 Rzeppa Type CVJ *2 Front Drive Shaft Damper
        *3 Tripod Type CVJ *4 Front Drive Shaft Assembly LH
        *5 Front Drive Shaft Assembly RH - -
        B003XF2 Front Axle Side B003XH4 Front Differential Side

        Figure 5. Models with 3ZR-FAE Engine

        A001MIRC01
        *1 Rzeppa Type CVJ *2 Front Drive Shaft Damper
        *3 Tripod Type CVJ *4 Front Drive Shaft Assembly LH
        *5 Front Drive Shaft Assembly RH - -
        B003XF2 Front Axle Side B003XH4 Front Differential Side

    2. Rear Drive Shaft (AWD Models)


      1. A tripod type Constant-Velocity Joint (CVJ) is used on the rear differential side, and a Rzeppa type CVJ is used on the rear axle side.

        Figure 6. Models for except Australia

        A001MNXC01
        *1 Tripod Type CVJ *2 Rzeppa Type CVJ
        B003XF2 Differential Side B003XH4 Rear Axle Side

        Figure 7. Models for Australia

        A001MZAC01
        *1 Tripod Type CVJ *2 Rzeppa Type CVJ
        B003XF2 Differential Side B003XH4 Rear Axle Side