STOP AND START SYSTEM


  1. CONSTRUCTION


    1. The backup boost converter uses a semiconductor relay. The semiconductor relay also functions as a fuse. When overcurrent is detected, the relay is turned off to protect the circuit.

    2. The backup boost converter supplies battery voltage to help make up for the voltage drop that occurs when the engine is restarted. This prevents the operation of the following equipment from being interrupted due to low battery voltage.


      • Radio and Display Receiver Assembly

      • Power Steering ECU Assembly

      • Skid Control ECU

      • Main Body ECU (Multiplex Network Body ECU)

      • Combination Meter Assembly

      • Inner Rear View Mirror Assembly*1

      • Clearance Warning ECU Assembly*2

      • Spiral Cable with Sensor Sub-assembly

      • Network Gateway ECU

      • Millimeter Wave Radar Sensor Assembly

      • Pre-collision City Buzzer

      • Blind Spot Monitor Sensor LH/RH*3

      • Forward Recognition Camera

      • Air Conditioning Amplifier Assembly*4

      *1: Models with automatic glare-resistant electrochromic (EC) dimming function

      *2: Models with simple intelligent parking assist system

      *3: Models with blind spot monitor system

      *4: Models with air conditioning system

      A001MWPE01