STOP AND START SYSTEM


  1. OPERATING CONDITION


    1. The engine will restart if any of these conditions are detected.

      Item Operating Condition
      Engine Restart Brake Booster Vacuum The brake booster vacuum is insufficient.
      Air Conditioning*1 / Heater

      • When the air conditioning is on and a timer in the air conditioning amplifier assembly completes.*1

      • The A/C switch*1, blower switch or defroster switch is turned on. Or, in the stop and start system settings, "Extended" (stop and start priority) has been changed to "Standard".

      • Evaporator temperature exceeds threshold (threshold varies with temperature, humidity and amount of solar radiator).
      Stop and Start Cancel Switch The stop and start cancel switch is turned on.
      Battery

      • The battery voltage is less than 11.4 V.

      • The battery integrated current drops to below the threshold value.
      Driver's Door The driver's door is opened.
      Driver's Seat Belt The driver's seat belt is unfastened.
      Vehicle Speed A vehicle speed signal is input.
      Clutch Pedal The clutch pedal is depressed.
      Steering Operation The steering wheel is operated.
      Simple Intelligent Parking Assist System*2 IPA main switch assembly is turned on.

      *1: Models with air conditioning system

      *2: Models with simple intelligent parking assist system

  2. FUNCTION


    1. If any of the following operations are performed while the engine is stopped due to system control, the system will not restart the engine. The driver will be warned by a buzzer, or the engine will be regarded as stalled or will be restarted.

      Operation Warning Control
      Driver door is opened. The engine changes to restarted.
      Hood is opened. The engine status changes to 'stalled' or is restarted.
      Shift lever is moved without depressing the clutch pedal. Buzzer sounds and the stop and start indicator light blinks.
      The driver seat belt is released. The engine changes to restarted.

    2. When the engine has stalled. (Not stopped by stop and start control)


      1. When stop and start system operation conditions have been met, the engine can be restarted by pressing the clutch pedal immediately (within 5 seconds or less after the engine stalled).