STARTING SYSTEM
| *A | Models with CVT | - | - |
| *1 | Crank Position Sensor | *2 | Engine Coolant Temperature Sensor |
| *3 | No. 1 Engine Room Relay Block
|
*4 | ECM |
| *5 | Park/Neutral Position Switch Assembly | *6 | Starter Assembly |
| *a | The illustrations shown are examples only. | - | - |
Figure 1. LHD Models
| *A | Models with Entry and Start System | *B | Models without Entry and Start System |
| *C | Models with Stop and Start System | *D | Models with Manual Transaxle |
| *1 | Instrument Panel Junction Block Assembly
|
*2 | Stop Light Switch Assembly |
| *3 | Ignition or Starter Switch Assembly | *4 | Engine Switch |
| *5 | Engine Stop and Start ECU | *6 | Network Gateway ECU |
| *7 | Clutch Start Switch Assembly | *8 | Certification ECU (Smart Key ECU Assembly) |
| *a | Refer to Service Bulletin for the installation position of the parts. | - | - |
Figure 2. RHD Models
| *A | Models with Entry and Start System | *B | Models without Entry and Start System |
| *C | Models with Stop and Start System | *D | Models with Manual Transaxle |
| *1 | Engine Stop and Start ECU | *2 | Clutch Start Switch Assembly |
| *3 | Stop Light Switch Assembly | *4 | Engine Switch |
| *5 | Ignition or Starter Switch Assembly | *6 | Instrument Panel Junction Block Assembly
|
| *7 | Network Gateway ECU | *8 | Certification ECU (Smart Key ECU Assembly) |
| *a | Refer to Service Bulletin for the installation position of the parts. | - | - |