FUEL SYSTEM

Info Added 2017-04-18


  1. CONSTRUCTION


    1. A multiplex layered plastic fuel tank is used. This fuel tank consists of 6 layers of 4 types of materials.

    2. A fuel drain mark has been provided at the lowest position of the fuel tank assembly. When dismantling (scrapping) the vehicle, drain fuel by drilling a hole at the drain mark.

      A001MSYC01
      *a Fuel Tank Wall Cross Section *b High Density Polyethylene (HDPE)
      *c Regrind Material *d Adhesive
      *e Ethylene Vinyl Alcohol Copolymer (EVOH) *f Fuel Drain Mark
      *g View from Bottom Side - -
      B003XF2 Fuel Tank Assembly Outside B003XH4 Fuel Tank Assembly Inside