ENGINE UNIT


  1. CONSTRUCTION


    1. The engine is supported by 3 mountings. A hydraulic mounting is used for the engine mounting insulator sub-assembly RH to reduce vibration and noise.

      Figure 1. Models with Manual Transaxle

      A001MVKC01
      *1 Engine Mounting Insulator Sub-assembly RH *2 Engine Mounting Insulator LH
      *3 Engine Moving Control Rod - -

      Figure 2. Models with CVT

      A001N6IC01
      *A 2WD Models *B AWD Models
      *1 Engine Mounting Insulator Sub-assembly RH *2 Engine Mounting Insulator LH
      *3 Engine Moving Control Rod - -