DYNAMIC RADAR CRUISE CONTROL SYSTEM


  1. OPERATION


    1. The combination meter assembly has a master warning light, cruise control indicator light (constant speed control mode), cruise control indicator light (vehicle-to-vehicle distance control mode), buzzer, and multi-information display to provide warnings and messages regarding the dynamic radar cruise control system.

      A003J2DC01
      *A LHD Models *B RHD Models
      *a Master Warning Light *b Multi-information Display
      *c Cruise Control Indicator Light (Vehicle-to-vehicle Distance Control Mode) *d Cruise SET Indicator Light
      *e Cruise Control Indicator Light (Constant Speed Control Mode) - -

    2. The multi-information display displays the set vehicle speed, vehicle ahead mark, and warning message.

    3. Examples are shown below for the illumination or display of each warning light or multi-information display.

      Constant Speed Control Mode
      Condition Multi-information Display A003IPW A003IVM Buzzer
      Being Controlled A003JF7 Illuminates - -
      System Check Check Cruise Control System Visit Your Dealer Does not illuminate Illuminates sounds
      Vehicle-to-vehicle Distance Control Mode
      Condition Multi-information Display A003IQV A003IVM Buzzer
      Set Standby A003J68 A003ISC Illuminates - -
      Under Constant Speed Control (No Vehicle Ahead, Long) A003J8B Illuminates - -
      Under Follow-up Control (Vehicle Ahead, Long) A003IZK Illuminates - -
      Under Follow-up Control (The vehicle ahead moves away when the vehicle is being driven at approximately 40 km/h [25 mph] or less.)* A003JGA Illuminates - -
      The vehicle-to-vehicle distance mark and vehicle ahead mark blinks
      Approach warning (Vehicle Ahead) A003J2N Illuminates - -
      The display frame, vehicle-to-vehicle distance mark and vehicle ahead mark blinks and the skid control buzzer sounds.
      Stop Retention Control* A003J0D Illuminates - -
      Start Control* A003IVL Illuminates - -
      Millimeter wave radar sensor assembly is dirty Clean Radar Sensor Does not illuminate Illuminates sounds

      • Poor Weather Conditions

      • A Malfunction in the forward recognition camera

      • The beam axis of the millimeter wave radar sensor assembly is being aligned

      • The forward recognition camera is temporarily unavailable

      • A system check is being performed after the engine has started

      		 Cruise Control not Available Does not illuminate Illuminates sounds
      System Check Check Cruise Control System Visit Your Dealer Does not illuminate Illuminates sounds
      System Check During Stop Retention Control* Check Cruise Control System Depress the Brake Pedal Visit Your Dealer Does not illuminate Illuminates sounds

      When any problem occurs during stop retention control, or any of the following conditions is met*:


      • The vehicle is driving on a steep hill

      • A preceding vehicle is not detected

      • A parking lock is not detected.

      		 Cruise Control not Available Depress the Brake Pedal Illuminates Does not illuminate sounds

      When any problem occurs during stop retention control, or any of the following conditions is met*:


      • The driver seat belt is unfastened

      • The driver door is opened

      • The vehicle is parked for a long period of time

      		 Cruise Control Off. Shifted to [P] Position. Depress the Brake Pedaland Shift to [D] to Restart Illuminates Does not illuminate sounds

      *: Models with full-speed range following function.

    4. A headup display equipped vehicle indicates cutoffs in the head-up display when there is a vehicle approach warning.

      Headup Display
      Condition Headup Display*
      Deceleration Control/Approach Warning (Vehicle Ahead, Long) A003J59

      *: This illustration is an example.