DYNAMIC RADAR CRUISE CONTROL SYSTEM


  1. CONSTRUCTION


    1. Cruise Control Switch


      1. The cruise control switch consists of the ON-OFF button, and the +RES, -SET and CANCEL switches. The ON-OFF button, +RES, -SET and CANCEL switches are operated by moving the lever in the 4 directions indicated.

      2. The cruise control switch is an automatic reset (normally open) type that turns on only when the switch is being operated and turns off as soon as the driver releases the switch. Furthermore, the functions of the control switch are active only when the cruise control system has been turned on using the ON-OFF button on the cruise control switch.

        A003JCIC02
        *1

        Steering Pad Switch Assembly


        • Vehicle-to-vehicle Distance Control Switch

        		 *2 Cruise Control Switch
        *a ON-OFF Button *b +RES Switch
        *c -SET Switch *d CANCEL Switch

    2. ON-OFF Button


      1. When the cruise control system is turned on using the main switch (ON-OFF button), the system starts in vehicle-to-vehicle distance control mode. When the main switch (ON-OFF button) is pressed and held for 1.5 seconds or more from the cruise control system off, the system changes to constant control mode.

    3. Vehicle-to-vehicle Distance Control Switch


      1. While the vehicle is being driven in vehicle-to-vehicle distance control mode, the vehicle-to-vehicle distance setting can be changed as follows each time the distance control switch is pressed; long → middle → short → long.

      2. If the power switch is turned off and back on, the system will default to "long".

      3. The vehicle-to-vehicle distance is as follows:

        Mode Vehicle-to-vehicle Distance*
        Long Approximately 50 m (160 ft.)
        Middle Approximately 40 m (131 ft.)
        Short Approximately 30 m (98 ft.)

        Tech Tips

        *: While driving at a speed of 80 km/h (50 mph).