BODY STRUCTURE


  1. CONSTRUCTION


    1. Anti-corrosion Sheet Steel


      1. Anti-corrosion sheet steel is used as shown in the following illustration:

        A01MA4N
        B006JN1 Anti-corrosion Sheet Steel - -
        A01M9ZS
        B006JN1 Anti-corrosion Sheet Steel - -

    2. Anti-chipping Application and Rust-resistant Performance


      1. Wax is applied to the edge of the door lower portion, door hinge and the hemmed portions of the hood sub-assembly to improve rust-resistant performance.

        A01MABEC02
        *1 Hood Hinge Assembly RH *2 Hood Hinge Assembly LH
        *3 Front Door Upper Hinge Assembly LH *4 Front Door Lower Hinge Assembly LH
        *5 Rear Door Upper Hinge Assembly LH *6 Rear Door Lower Hinge Assembly LH
        *a A-A Cross Section *b Wax
        *c B-B Cross Section, C-C Cross Section - -

      2. Polyvinyl Chloride (PVC) coating is applied to the wheel housings, and other parts that are located where they are susceptible to stone chipping damage, improving the rust-resistance of these areas.

        A01MAEPC01
        *a Left Hand Side *b Right Hand Side
        A01MA3E Edge Seal - -