BODY STRUCTURE


  1. FUNCTION


    1. Using electric motors as its source of motive power, a fuel cell vehicle does not produce high-temperature exhaust gases, so the entire area under the floor can be covered with airflow rectifying parts, which has realized a high rectification effect. Also, with a body shape designed for aerodynamics, air resistance has been decreased and rectification effect has been increased, achieving excellent stability characteristics as well as improved fuel efficiency.

      A01MAEBC01
      *1 Front Bumper Absorber Lower *2 No. 1 Motor Under Cover
      *3 No. 2 Motor Under Cover *4 Front Floor Cover LH
      *5 Front Center Floor Cover LH *6 No. 2 Floor Under Cover
      *7 No. 1 Floor Under Cover *8 Front Center Floor Cover RH
      *9 Front Floor Cover RH - -
      *a A-A Cross Section - -
      A01MAAB Airflow inside motor compartment - -

    2. By putting shielding plates (water guard plate, No. 2 heater air duct splash shield seal) inside the cowl top ventilator louver sub-assembly, the amount of air that flows in from the motor compartment has been reduced, outside air has been introduced, and temperature increase of the introduced air has been controlled. Because of this, the operation rate of the air compressor assembly w/motor has been reduced, improving fuel efficiency.

      A01MA38C01
      *1 Water Guard Plate RH *2 No. 2 Heater Air Duct Splash Shield Seal
      *3 Cowl Top Ventilator Louver Sub-assembly *4 Hood Sub-assembly
      *5 Windshield Glass - -
      *a A-A Cross Section - -
      A01MAAB Airflow inside motor compartment - -