LIGHTING SYSTEM


  1. OUTLINE


    1. Exterior Light


      1. The front lights consist of the following lights:

        A01MA1DC01
        *1 High Beam *2 Low Beam
        *3 Daytime Running Light/Clearance Light *4 Front Turn Signal Light
        *5 Side Turn Signal Light Assembly - -

      2. The rear lights consist of the following lights:

        A01MA4JC01
        *1 Stop Light *2 Taillight
        *3 Rear Turn Signal Light *4 Back-up Light
        *5 Center Stop Light Assembly *6 Rear Light Assembly RH
        *7 Rear Combination Light Assembly RH *8 Rear Combination Light Assembly LH
        *9 Rear Light Assembly LH *10 License Plate Light Assembly
        *11 Rear Fog Light Assembly - -

    2. Light Emitting Diode (LED) Headlight System


      1. The LED headlight system uses LEDs as its light source. This system consists of LEDs and headlight light control ECU sub-assembly.

      2. The fail-safe function is provided in case that problem occurs in the headlight system.

    3. Daytime Running Light System


      1. The daytime running light system is designed to automatically illuminate the Light Emitting Diode (LED) lights during the daytime to keep the vehicle highly visible to other vehicles.

    4. Light Auto Turn-off System


      1. The light auto turn-off system is used to prevent the driver from leaving the vehicle with the headlights, clearance lights, taillights or license plate lights on.

    5. Automatic Headlight Beam Level Control System


      1. When the vehicle is stopped with the EV system and headlights on, the automatic headlight beam level control system operates the headlight leveling motors in accordance with movement of the vehicle.

    6. Automatic Light Control System


      1. When the light control switch is in the AUTO position, the automatic light control sensor detects the ambient light level and automatically turns the headlights, taillights, clearance lights, and license plate lights on or off accordingly.

    7. Emergency Brake Signal System


      1. The hazard warning lights flash automatically in the case of emergency braking to alert following drivers, thus helping to reduce rear-end accidents.

    8. Automatic High Beam System


      1. The automatic high beam system detects lights in front of the vehicle and automatically changes between high beams and low beams to support the driver during night driving.

  2. SPECIFICATION

    Light Specification
    Headlight Assembly Low Beam 14 V 25.0 W (LED x 2)
    High Beam 14 V 24.0 W (LED x 2)
    Clearance Light Assembly Daytime Running Light / Clearance Light 12 V 10.3 W / 1.3 W (LED x 12)
    Front Turn Signal Light 12 V 12.8 W (LED x 11)
    Side Turn Signal Light Assembly 13.5 V 0.68 W (LED x 3)
    Rear Combination Light Assembly Taillight 12 V 3.0 W (LED x 30)
    Stop Light 12 V 1.7 W (LED x 6)
    Rear Turn Signal Light 12 V 3.9 W (LED x 9)
    Rear Light Assembly Stop Light 12 V 1.7 W (LED x 6)
    Back-up Light 12 V 2.5 W (LED x 2)
    License Plate Light Assembly 6 V 0.3 W (LED x 1)
    Center Stop Light Assembly 12 V 2.0 W (LED x 6)
    Rear Fog Light Assembly 12 V 21.0 W (W21W Type)