SEAT ASSEMBLY


  1. CONSTRUCTION


    1. Front Seat


      1. The seat cushion frame uses a formed wire construction consisting of S-shaped springs and rectangular wires for improved riding comfort.

      2. The polyurethane foam and the felt inside the seat cushion have been combined into a single unit and the sides of the cushion have been hardened to improve side support.

      3. For the front seat back and cushion, one-piece molding of the covering and polyurethane foam has made concave surfaces possible, and in addition to making a seamlessly connected single-piece front covering, the seat back surface has been made concave.

        A01MA5KC02
        *1 Seat Back *2 Seat Cushion
        *3 Felt - -
        *a A - A Cross Section *b B - B Cross Section

      4. The rear surfaces of the driver and passenger seats have been configured with seat back pockets to improve storage ability.

    2. Power Lumbar Support


      1. The front seat uses a 2-way adjustable lumbar support. This support includes a plastic basket that is located near the lumbar area of the occupant and pushes the seat back forward, thus providing uniform support from the upper back down to the pelvis for a better fit.

        A01MAAMC01
        *1 Plastic Basket *2 Lumbar Support Wire
        *3 Lumbar Support Motor - -