PRE-CRASH SAFETY SYSTEM


  1. OPERATION


    1. A pre-crash system cancel switch assembly is provided to turn the pre-crash safety system ON/OFF and switch between different warning timings.

    2. When the pre-crash safety system is ON, pressing the pre-crash system cancel switch assembly displays the warning timing. While the warning timing is being displayed, each additional press of the pre-crash system cancel switch assembly changes the warning timing displayed on the multi-information display in the order far-medium-near. This enables the pre-crash safety system to be switched between 3 levels of sensitivity.

    3. When the pre-crash safety system is ON, pressing and holding the pre-crash system cancel switch assembly for approximately 3 seconds allows the pre-crash safety system to be canceled.

      Tech Tips


      • "Medium" is the default setting.

      • The sensitivity setting display is shown for 6 seconds.

      • While the system is canceled, the multi-information display and PCS warning light are illuminated.

      A01MABQE01