METER / GAUGE SYSTEM


  1. FUNCTION


    1. Multi-information Display


      1. Warning Mode Function


        • When a warning is necessary, the warning display interrupts the display in the multi-information display.

        • The master warning light may illuminate or blink and the buzzer in the combination meter assembly may sound depending on the item displayed on the multi-information display.

        Priority Display Master Warning Light Buzzer
        1 2WD MAINTENANCE MODE - -
        2WD CERTIFICATION MODE - -
        ADJUSTING LDA CAMERA - -
        ADJUSTING FRONT RADAR BEAM - -
        CHECKING CRUISE CONTROL C/D - -
        CHECKING CRUISE CONTROL BRAKE - -
        BRAKE! - -*
        Push and Hold Power Switch for Emergency Stop Blinks Sounds
        Shift to N and Press Power Switch to Restart Blinks Sounds
        FC System Stopped Shift to P Position Blinks Sounds
        FC System Stopped Stop in a Safe Place Blinks Sounds
        2 Shift to P Before Exiting Vehicle Blinks Sounds
        3 Door Open (While Driving) Blinks Sounds
        Door Open - -
        Parking Assist Malfunction Visit Your Dealer Illuminates -
        Parking Assist Detected Object - -
        Parking Assist Malfunction Illuminates -
        Clean Parking Assist Sensor Illuminates -
        FC System Shutdown due to Hydrogen Leakage Stop Your Vehicle in a Safe Place and Contact Your Dealer Illuminates Sounds
        4 Power Turned OFF to Save Battery - -
        Close H2 Filler Door and Restart Your Vehicle Illuminates Sounds
        5 Hydrogen Leakage Detected Visit Your Dealer Illuminates Sounds
        Hydrogen Sensor Malfunction Visit Your Dealer Illuminates Sounds
        Check Charging System Illuminates -
        6 Shift to P Before Exiting Vehicle Blinks Sounds
        Shift is in N Release Accelerator Before Shifting Blinks Sounds
        Accelerator Pedal is Pressed Check The Accelerator Pedal Blinks Sounds
        Press Brake When Vehicle is Stopped FC System may Overheat Blinks Sounds
        7 Insufficient Aux Battery Charge When Parking, Apply Parking Brake Securely then See Owner's Manual Illuminates Sounds
        Shift System Malfunction When Parking, Apply Parking Brake Securely then See Owner's Manual Illuminates Sounds
        Shift System Malfunction Shifting Unavailable See Owner's Manual Illuminates Sounds
        Shift System Malfunction Stop Your Vehicle in a Safe Place then See Owner's Manual Illuminates Sounds
        [P] Switch Malfunction When Parking, Apply Parking Brake Securely then See Owner's Manual Illuminates Sounds
        Shift System Malfunction When Parking, Apply Parking Brake Securely then See Owner's Manual Illuminates Sounds
        Shift System Malfunction See Owner's Manual Illuminates Sounds
        8 H2 Filler Door is open. Park Your Vehicle in a Safe Place and Close H2 Filler Door Illuminates Sounds
        FC System Malfunction Visit Your Dealer Illuminates Sounds
        Power Steering Malfunction Steering Power Low Visit Your Dealer Illuminates Sounds
        Steering Power Low Visit Your Dealer Illuminates Sounds
        Power Steering Malfunction Visit Your Dealer Illuminates Sounds
        Release Parking Brake Blinks Sounds
        Key not Detected Check Key Location Blinks Sounds
        Release Accelerator Blinks Sounds
        FC System Malfunction Visit Your Dealer Illuminates Sounds
        FC System Malfunction Stop in a Safe Place and Contact Your Dealer Illuminates Sounds
        Maintenance Required for Hybrid Battery Cooling Parts at Your Dealer - -
        FC System Shutdown due to Freezing conditions Stop Your Vehicle in a Safe Place and Contact Your Dealer Illuminates -
        9 High FC Temperature Reduced Power Illuminates Sounds
        Low Residual Fuel Power Reduced Illuminates Sounds
        10 Radar Cruise Control Unavailable Clean Sensor Illuminates Sounds
        Radar Cruise Control Unavailable Illuminates Sounds
        Smart Entry & Start System Malfunction See Owner's Manual Blinks Sounds
        Blind Spot Monitor Unavailable Illuminates Sounds
        Cruise Control Malfunction Visit Your Dealer Illuminates Sounds
        Cruise Control Unable to Keep Constant Speed Press Brake to Deactivate and Control Speed. - -
        Lane Departure Alert Malfunction Visit Your Dealer Illuminates Sounds
        Lane Departure Alert Unavailable Camera Overheated Illuminates Sounds
        Pre-Crash Safety Malfunction Visit Your Dealer Illuminates Sounds
        Pre-Crash Safety Alert - -
        Blind Spot Monitor System Malfunction Visit Your Dealer Illuminates Sounds
        Check Brake System Illuminates Sounds
        Lane Departure Alert System is Unavailable Below Approx. 50 km/h. - -
        Lane Departure Alert System is Unavailable Below Approx. 32 MPH. - -
        FC System Check in Progress Illuminates Sounds
        FC System Check Completed - Sounds
        Br Mode is Unavailable - Sounds
        11 Pre-Crash Safety Turned Off - -
        FC System Stopped Steering Power Low Illuminates Sounds
        Turn OFF Vehicle Blinks Sounds
        Key Detected in Vehicle Blinks Sounds
        Window Opened Blinks Sounds
        Press Brake Pedal, Touch Power Switch with Key Blinks Sounds
        Press Brake Pedal and Push Power Switch to Start - Sounds
        Open H2 Filler Door in a Safe Place when Vehicle is Powered OFF Illuminates Sounds
        12 Steering Wheel Lock Press Power Switch while Turning Wheel Blinks Sounds
        Shift to P Position to Start Blinks Sounds
        Drive-Start Control Malfunction Visit Your Dealer Illuminates Sounds
        Brake Override Malfunction Visit Your Dealer Illuminates Sounds
        13 Key Battery Low Illuminates Sounds
        FC System Overheat Output Power is Limited Illuminates Sounds
        Headlight System Malfunction Visit Your Dealer Illuminates Sounds
        Proximity Notification System Malfunction Visit Your Dealer Illuminates Sounds
        Accelerator and Brake Pedals Depressed Simultaneously Blinks -
        14 Windshield Washer Fluid Low - -
        Water Release Completed - Sounds
        TRC OFF - -
        Insufficient Aux Battery Charge Shift is Unavailable See Owner's Manual Blinks Sounds
        Shifting Unavailable When READY Indicator is Flashing Blinks Sounds
        Shifting Temporarily Unavailable Wait a Moment and Try Again Blinks Sounds
        Shifted to [N] Position Shift to [D] once, then Shift to [Br] Blinks Sounds
        Shifting to [D] or [R] Position Unavailable Try to Shift after FC System has Started Blinks Sounds
        Shifting Unavailable Press Brake Pedal before Shifting Blinks Sounds
        Shifting to [Br] Mode Unavailable Shift to [D] once, then Shift to [Br] Blinks Sounds
        Shifted to [N] Position Stop Your Vehicle before Shifting to [D] Blinks Sounds
        Shifted to [N] Position Stop Your Vehicle before Shifting to [R] Blinks Sounds
        Shifted to [N] Position To Shift to [P], Stop Your Vehicle and Press [P] Switch Blinks Sounds
        Ion Filter Maintenance Required Visit Your Dealer - Sounds
        To Activate Auto High Beam, Switch Headlights to High Beam - -
        Power ON - -
        Press Brake Pedal and Push Power Switch to Star - -
        Pre-Crash Brake is Disabled due to VSC OFF - -
        Pre-Crash Safety Unavailable - -
        Excessive Power used Disconnect External Devices Restart the Power Supply Illuminates -
        Ready-OFF Disconnect Power Plug and Restart Illuminates Sounds
        READY not Available Disconnect Power Plug and Restart Illuminates Sounds
        External Power Supply Malfunction. Illuminates -
        External Power Supply Unit is Incompatible Illuminates -
        Close External Power Supply Cap Illuminates Sounds
        Power Supply Stopped due to Low Hydrogen Level Refill Hydrogen and Restart Power Supply Illuminates -

        *: Skid control buzzer operation is activated.

    2. Rear Seat Belt Warning


      1. The rear seat belt warning function indicates the state of the rear seat belts using the rear seat belt warning light on the combination meter assembly.

      2. The combination meter assembly displays the rear seat belt warning based on the rear seat belt buckle switches and courtesy switches for the rear doors. If a warning is necessary, the buzzer in the combination meter assembly will also sound.

      3. The flow of operations that results in a rear seat belt warning is as follows:

        A01MA2ZE01
        Step Condition Transition Warning Light Buzzer
        (a) Power switch is off. Warning is not displayed. No Sound
        (b) A rear door is opened then closed.
        (c)

        • Power switch is turned to on (IG).

        • A seat belt is fastened.

        • In this case, all seats will be displayed as being unfastened regardless of the number of occupants. If seat belts are then fastened, the display for the relevant seat will go off.

        • The warning will be displayed for approximately 34 seconds and then go off.
        (d) Any of the rear seat belts are unfastened. Seats with an unfastened seat belt will be displayed regardless of the number of occupants.

        If the vehicle speed exceeds 20 km/h (12 mph), and the shift position is in a position other than R.:

        1. Sounds for 30 seconds*1

        2. Sounds for an additional 90 seconds*2
        (e)

        When one of the following conditions is met, the buzzer will stop sounding.

        - The seat belt is refastened.

        - Vehicle speed is lower than approximately 2 km/h (1.2 mph) and either the parking brake is applied or the shift position is in P.

        • Seats with an unfastened seat belt will be displayed regardless of the number of occupants.

        • The warning message will be displayed for approximately 34 seconds and then go off.

        		 Stops sounding

        *1: Sound cycle is 1.2 seconds.

        *2: Sound cycle is 0.4 seconds.