ENTRY AND START SYSTEM


  1. CONSTRUCTION


    1. Combination Meter Assembly


      1. When the certification ECU (smart key ECU assembly) detects an abnormality with the entry and start system, a message appears on the multi-information display. If the fuel cell system is stopped in this state, it might not be possible to restart it.

        A01MA19C01
        *1 Combination Meter Assembly - -
        *a Main Display *b Multi-information Display
        *c Key Warning Light *d Power Source State (ACC)
        *e Power Source State (IG) - -
        Power Source Display
        Displayed Item Power Source Condition
        -

        Either of the following conditions is met:


        • The fuel cell system has started.

        • The power source is turned off.
        ACCESSORY On (ACC) state
        IGNITION ON On (IG) state (the fuel cell system is not started.)
        Key Warning Light Fuel cell system start ready state*

        *: The shift position is in P, the key certification result is OK and the brake pedal is depressed (the stop light switch assembly is on).