FC CONTROL SYSTEM


  1. CONSTRUCTION


    1. In consideration of safety, a service plug separate from the EV battery assembly has been provided in the upper area of the FC stack to enable the electrical generating areas to be easily disconnected at the circuit level.

      Note

      The EV battery assembly also has a service plug grip that must also be removed before performing any work on the high voltage system.

      A01M9ZPC01
      *1 FC Service Plug Grip *2 FC Stack Assembly

      Note

      When removing the FC service plug grip, for safety reasons always turn the power switch off before performing the operation. Also, do not attempt to start the FC system while the FC service plug grip is removed, as this may damage components. When performing work on the high voltage system, for safety reasons, be sure to wear insulating gloves and perform all other procedures necessary to prevent electric shock. For details about working on the high voltage system, refer to the Repair Manual.