HYBRID BATTERY SYSTEM


  1. CONSTRUCTION


    1. Battery module, battery voltage sensor, battery cooling blower assembly, by storing optimally in EV battery junction block assembly and service plug grip one of the cases, as well as made compact, we have an excellent structure to maintenance of.

    2. The battery module, employs a sealed nickel-metal hydride battery, you have to connect the 34 pieces of modules in series.

    3. Set the service plug to perform the interruption of the high voltage circuit, ensuring safety during maintenance operations.

      A01MABTC01
      *1 Battery Cooling Blower Assembly *2 No. 1 EV Battery Intake Duct
      *3 Battery Voltage Sensor *4 No. 2 EV Battery Intake Duct
      *5 EV Battery Assembly *6

      EV Battery Junction Block Assembly


      • SMR (System Main Relay)

      • EV Battery Current Sensor
      *7 Service Plug Grip - -

    4. The battery module and one module the cell of 1.2 V at 6, we have a structure that connects the module 34 pieces in series by the bus bar module. This was to ensure high voltage of 244.8 V by a total of 204 cells throughout EV battery.

      A01MA0ZC01
      *1 Battery module x 34 *2 Bus Bar Module
      *3 Service Plug Grip *4 Interlock switch
      *5 EV Battery Junction Block Assembly *6 Power Cable