CLUTCH SYSTEM


  1. CONSTRUCTION


    1. A plunger type clutch master cylinder assembly is used.

    2. A resin master cylinder is used to achieve weight reduction.

      Figure 1. Models without iMT System

      B002N0MC01
      *1 Clutch Master Cylinder Assembly *2 Cylinder Push Rod Clevis Sub-assembly

      Figure 2. Models with iMT System

      B002NPNC01
      *1 Clutch Master Cylinder Assembly *2 Clutch Stroke Sensor
      *3 Sensor Magnet *4 Cylinder Push Rod Clevis Sub-assembly
      *5 Sensor Yoke - -