CLUTCH SYSTEM


  1. OUTLINE


    1. A dry type single plate clutch, which is operated by hydraulic pressure, is used.

    2. A low-peak effort clutch type clutch cover is used.

    3. A resin clutch master cylinder is used. Also, on models with the intelligent Manual Transmission (iMT) system, an integrated clutch stroke sensor type master cylinder assembly is used.

    4. A clutch accumulator assembly is used.

    5. A clutch pedal with turnover spring is used.

    6. A clutch start system is used.

      B002NDP

  2. SPECIFICATION

    Clutch Type Single Dry Plate, Diaphragm
    Operation Hydraulic
    Clutch Cover Type Low-peak Effort Clutch
    Installed Load 9300 N
    Clutch Disc Facing Size* 275.0 mm x 175.0 mm (10.8 in. x 6.9 in.)
    Master Cylinder Type Plunger
    Cylinder Diameter 19.05 mm (0.75 in.)
    Release Cylinder Type Conventional
    Cylinder Diameter 22.2 mm (0.87 in.)
    Clutch Pedal With Turnover Spring

    Tech Tips

    *: Outer diameter x inner diameter