EMISSION CONTROL SYSTEM


  1. CONSTRUCTION


    1. A water-cooled type No. 1 EGR cooler is used between the exhaust manifold and electric EGR control valve assembly. In the water-cooled type No. 1 EGR cooler, engine coolant flows through eight-layered gas passage to cool down the EGR gas.

    2. The No. 2 EGR valve assembly is used. The EGR gas passage is switched in 2 stages by the No. 2 EGR valve assembly to optimize the temperature of the EGR gas.

      B002MYRC01
      *1 Exhaust Manifold *2 No. 1 EGR Cooler
      *3 Diesel Throttle Body Assembly *4 Intake Manifold
      *5 No. 2 EGR Valve Assembly *6 Electric EGR Control Valve Assembly
      *a Intake Air *b EGR Gas
      *c EGR Gas (through Bypass Passage) - -