SFI SYSTEM


  1. CONSTRUCTION


    1. A non-contact type throttle position sensor is used. This sensor uses a Hall IC, which is mounted on the throttle body.

    2. The Hall IC is surrounded by a magnetic yoke. The Hall IC converts the changes that occur in the magnetic flux into electrical signals and outputs them as throttle valve effort to the ECM.

      B002N3MC01
      *1 Throttle Body with Motor Assembly *2 Throttle Valve
      *3 Throttle Control Motor *4 Throttle Position Sensor
      *5 Magnetic Yoke *6 Magnet
      *a Throttle Position Sensor Cross Section - -

    3. The Hall IC contains circuits for the main and sub signals. It converts the throttle valve opening angles into electric signals with 2 differing characteristics and outputs them to the ECM.

      B002N6HE01