AIR CONDITIONING SYSTEM


  1. CONSTRUCTION


    1. Rear Cooling Unit


      1. The rear cooling unit assembly is mounted inside the deck side trim.

      2. The roof register and ducts are mounted on the roof headlining and roof side inner garnish.

        B002NPTC01
        *1 No. 1 Air Duct Sub-assembly *2 No. 3 Air Duct Sub-assembly
        *3 Rear Cooling Unit Assembly *4 No. 5 Air Duct Sub-assembly
        *5 No. 4 Air Duct Sub-assembly *6 No. 2 Air Duct Sub-assembly

      3. The rear evaporator assembly uses the revolutionary super-slim structure.

      4. The blower motor controller is controlled with the duty control from the air conditioning amplifier assembly. When front air conditioning system operated in the heating mode, the rear cooling unit will be stopped.*1

      5. The blower motor with fan sub-assembly is controlled from the rear cooler switch.*2


        • *1: Models with rear automatic cooler system

        • *2: Models with rear manual cooler system

          B002MYIC01
          *A Models with Automatic Rear Cooler System *B Models with Manual Rear Cooler System
          *1 Blower Motor with Fan Sub-assembly *2 Rear Evaporator Sub-assembly
          *3 Blower Motor Control *4 Rear Cooler Relay
          *5 Rear Blower Resister - -