SEAT ASSEMBLY


  1. CONSTRUCTION


    1. Rear No. 1 Seat


      1. ISOFIX Bar


        1. Both the left and right seats are provided with an ISOFIX compatible child seat securing bars (ISOFIX bar) and a top tether anchor bar.

          B002NBOC01
          *1 ISOFIX Bar *2 Top Tether Anchor Bar

      2. Cup Holder


        1. A cup holder is provided in the rear center armrest.

          B002NFEC01
          *1 Rear Center Armrest *2 Cup Holder

      3. Tumble Mechanism


        1. A Independentry tumble mechanism is provided for the left and right side rear No. 1 seats.

        2. The 60/40 split tumble seat is folded by pulling the reclining lever. In this way, it is possible easy to access the rear No. 2 seat.

          B002NDEC01
          *1 Reclining Lever - -
          *a Tumble Mechanism - -

      4. Adjuster Function


        1. The manual adjuster is provided as shown in the illustration:

          B002NK6C01
          *a Neutral Position *b 44°
          *c 8° *d 95.5°
          *e Slide Length: 75 mm - -

    2. Rear No. 2 Seat


      1. Flip-up Mechanism


        1. When flipping a seat up, pull the reclining belt, then collapse the seatback forward, then release the inner leg and floor locks.

        2. After releasing the inner leg lock, the seat automatically flips up via the spring located inside the outer hinge while the inner leg is stored under the seat cushion.

        3. With the rear No. 2 seat flipped up, insert the seat fixing buckle located under the seat cushion into the rear pillar lock, and secure the seat in the flipped-up state.

          B002NGWC01
          *1 Reclining Belt *2 Inner Leg
          *3 Seat Fixing Buckle - -
          *a Pull *b Pushes down in front.
          *c Flip-up - -

      2. Adjuster Function


        1. The manual adjuster is provided as shown in the illustration:

          B002NL5C01
          *a Neutral Position *b 12°
          *c 10° *d 98°