LIGHTING SYSTEM


  1. OUTLINE


    1. Exterior Light


      1. The exterior lights consist of the following:

        A01RGU4C03
        *1 Side Turn Signal Light *2 Headlight Assembly
        *3 Fog Light Assembly - -
        *a The illustrations shown are examples only. - -
        A01RGRUC01
        *1 Low Beam/High Beam *2 Clearance Light
        *3 Front Turn Signal Light - -
        A01RGB8C01
        *1 Fog Light Assembly *2 Front Fog Light
        *3 Daytime Running Light - -
        A01RGBDC01
        *1 Rear Combination Light Assembly *2 Rear Light Assembly
        *3 Center Stop Light Assembly *4 License Plate Light Assembly
        A01RGBAC02
        *A Models without Rear Fog Light *B Models with Rear Fog Light
        *1 Rear Turn Signal Light *2 Taillight
        *3 Back-up Light *4 Stop Light
        *5 Rear Fog Light - -

    2. Daytime Running Light System


      1. The daytime running light system is designed to automatically illuminate the Light Emitting Diode (LED) lights during the daytime to keep the vehicle highly visible to other vehicles.

    3. Light Auto Turn-off System


      1. The light auto turn-off system is used to prevent the driver from leaving the vehicle with the headlights, front fog lights, clearance lights, taillights or license plate lights on.

    4. Automatic Headlight Beam Level Control System (Models with Automatic Headlight Beam Level Control System)


      1. When the vehicle is stopped with the engine and headlights on, the automatic headlight beam level control system operates the headlight leveling motors in accordance with movement of the vehicle.

    5. Automatic Light Control System


      1. When the light control switch is in the AUTO position, the automatic light control sensor detects the ambient light level and automatically turns the headlights, taillights, clearance lights and license plate lights on or off accordingly.

      2. This system is controlled by the main body ECU (multiplex network body ECU).

    6. Emergency Brake Signal System (Except Destination Package for India)


      1. The hazard warning lights flash automatically in the case of emergency braking to alert following drivers, thus helping to reduce rear-end accidents.

    7. Automatic High Beam System (Models with Automatic High Beam System)


      1. The automatic high beam system detects lights in front of the vehicle and automatically changes between high beams and low beams to support the driver during night driving.

    8. Lane Change Flasher System


      1. The lane change flasher system flashes the turn signal light a certain number of times when the turn signal switch (headlight dimmer switch assembly) is moved to the lane change position. By using the lane change flasher system when changing lanes, it is no longer necessary to hold the turn signal switch in the lane change position.

  2. SPECIFICATION

    Light Type Wattage
    Headlight Assembly LH/RH Low Beam/High Beam LED x 1 25/30
    Front Turn Signal Light WY21W 21
    Clearance Light LED x 2 1.2
    Fog Light Assembly LH/RH LED x 2 5.4
    Daytime Running Light LED x 3 3.5
    Side Turn Signal Light Assembly LH/RH LED x 2 0.5
    Rear Combination Light Assembly LH/RH Taillight LED x 1 1.1
    Back-up Light W16W 16
    Rear Turn Signal Light WY21W 21
    Rear Light Assembly LH/RH Taillight LED x 1 1.1
    Stop Light LED x 4 1.1
    Rear Fog Light* LED x 4 1.0
    Center Stop Light Assembly LED x 4 0.4
    License Plate Light Assembly (LH/RH) LED x 1 0.3/0.3

    *: Models with rear fog lights