ENTRY AND START SYSTEM


  1. CONSTRUCTION


    1. Combination Meter Assembly


      1. When the certification ECU (smart key ECU assembly) detects an abnormality with the entry and start system, a message appears on the multi-information display. If the hybrid system is stopped in this state, it might not be possible to restart it.

        A01RGGDC01
        *A LHD Models *B RHD Models
        *1 Combination Meter Assembly - -
        *a Power Source State *b Power Source State (ACC)
        *c Power Source State (IG) *d Key Warning Light
        *e Main Display *f Multi-information Display
        Power Source Display
        Displayed Item Power Source Condition
        -

        Either of the following conditions is met:


        • The hybrid system has started.

        • The power source is turned off.
        Accessory On (ACC) state
        Ignition ON On (IG) state (the hybrid system is not started.)
        Key Warning Light Hybrid system start ready state*

        Tech Tips

        *: Park (P) has been selected, the key certification result is OK and the brake pedal is depressed (the stop light switch assembly is on).