ENGINE UNIT


  1. CONSTRUCTION


    1. A valve lash adjuster assembly is located at the fulcrum of each No. 1 valve rocker arm sub-assembly. A valve lash adjuster assembly consists primarily of a plunger, a plunger spring, a check ball, and a check ball spring.

    2. The valve lash adjuster assembly is actuated by the engine oil, plunger spring, and check ball spring. The oil pressure and the spring force that act on the plunger push the No. 1 valve rocker arm sub-assembly against the cam, adjusting the valve clearance. This reduces the engine noise that is created during the opening and closing of the valves.

      A01RGGQC02
      *1 Body *2 Plunger
      *3 Check Ball *4 Ball Retainer
      *5 Oil Hole *6 Check Ball Spring
      *7 Plunger Spring *8 No. 1 Valve Rocker Arm Sub-assembly
      *9 No. 2 Camshaft (Exhaust) *10 Oil Passage
      *11 Exhaust Valve *12 Cylinder Head Sub-assembly
      *a Valve Lash Adjuster Assembly Cross Section *b Clearance

      Tech Tips

      Valve clearance adjustment is not necessary because hydraulic valve lash adjusters are used.