BODY STRUCTURE


  1. CONSTRUCTION


    1. Anti-corrosion Sheet Steel


      1. Anti-corrosion sheet steel is used as in the following illustration:

        A01IDKI
        B006K39 Anti-corrosion Sheet Steel - -
        A01IDE7
        B006K39 Anti-corrosion Sheet Steel - -

    2. Anti-chipping Application and Rust-resistant Performance


      1. Wax is applied to the edge of the door lower portion, door hinge, fuel filler opening lid assembly, and the hemmed portions of the hood sub-assembly and back door panel sub-assembly to improve rust-resistant performance.

        A01IDPQC01
        *A VELLFIRE *B ALPHARD
        *1 Hood Sub-assembly *2 Front Door Hinge Assembly Upper
        *3 Front Door Hinge Assembly Lower *4 Front Door Panel Sub-assembly
        *5 Slide Door Sub-assembly *6 Slide Door Hinge Assembly Center
        *7 Fuel Filler Opening Lid Assembly *8 Back Door Hinge Assembly
        *9 Back Door Panel Sub-assembly - -
        *a Wax *b Soft Anti-chipping Primer Application Range (Models for Russia Only)
        A01IDQMC01
        *a A - A Cross Section *b B - B Cross Section
        *c C - C Cross Section *d D - D Cross Section
        B006K39 Stone Guard Coat Application Range - -

      2. Polyvinyl Chloride (PVC) coating is applied to the wheel housings, and other parts that are located where they are susceptible to stone chipping damage, improving the rust-resistance of these areas.

        A01IDGKC01
        *A Except models for Russia *B Models for Russia
        *a Edge Seal *b Left Side View
        *c Under Side View *d Right Side View