SLIDING ROOF SYSTEM


  1. OUTLINE


    1. A twin moon roof system may be equipped depending on the specification.

    2. A manual type tilt-up roof is used on the front side of the twin moon roof. On the rear side, a power sliding roof is used.

    3. The sliding roof ECU controls the sliding roof system. This ECU uses 2 Hall ICs to detect the position of the sliding roof. The sliding roof ECU and the 2 pulse sensors (Hall IC) are integrated in the sliding roof drive gear assembly.

      A01IE3EC01
      *1 Power Sliding Roof *2 Manual Type Tilt-up Roof