AIR CONDITIONING SYSTEM


  1. CONSTRUCTION


    1. A bus connector is used in the No. 2 air conditioning harness assembly, which connects the servo motor to the air conditioning amplifier assembly.

    2. The bus connector has a built-in driver IC with a position detection function that communicates with each servo motor connector and actuates the servo motor. This enables bus communication for the servo motor wire harness with a more light weight construction and a reduced number of wires.

      Figure 1. No. 2 Air Conditioning Harness Assembly

      A01IDRSC01
      *1 Bus Connector (to Rear No. 1 Cooling Unit Damper Servo Sub-assembly) *2 Bus Connector (to Rear No. 2 Cooling Unit Damper Servo Sub-assembly)
      *3 Rear Evaporator Temperature Sensor - -
      *a to Air Conditioning Amplifier Assembly - -