DRIVE SHAFT SYSTEM


  1. OUTLINE


    1. Front Drive Shaft


      1. The front drive shaft assembly uses a tripod type Constant Velocity (CV) joint on the differential side, and a Rzeppa type CV joint on the front axle side.

      2. A front drive shaft damper is provided to reduce vibration and noise.

        Figure 1. Models with 2AR-FE Engine

        B006KDRC01
        *1 Front Drive Shaft Assembly LH *2 Front Drive Shaft Assembly RH
        *3 Front Drive Shaft Damper LH - -
        *a Rzeppa Type CV Joint *b Tripod Type CV Joint
        B006KF4 Front Axle Side B006K0K Differential Side

        Figure 2. Models with 2GR-FE Engine

        B006JVRC01
        *1 Front Drive Shaft Assembly LH *2 Front Drive Shaft Assembly RH
        *3 Front Drive Shaft Damper LH - -
        *a Rzeppa Type CV Joint *b Tripod Type CV Joint
        B006KF4 Front Axle Side B006K0K Differential Side