OUTLINE
Exterior Light
The exterior lights consist of the following:
| *1 | Headlight Assembly RH | *2 | Headlight Assembly LH |
| *3 | Clearance Light Assembly RH | *4 | Clearance Light Assembly LH |
| *5 | Side Turn Signal Light Assembly RH | *6 | Side Turn Signal Light Assembly LH |
| *7 | Outside Handle Illumination | *8 | Low Beam |
| *9 | High Beam | *10 | Front Turn Signal Light |
| *A | Models without Rear Fog Light | *B | Models with Rear Fog Light |
| *1 | Rear Combination Light Assembly LH | *2 | Rear Combination Light Assembly RH |
| *3 | Rear Light Assembly LH | *4 | Rear Light Assembly RH |
| *5 | Center Stop Light Assembly | *6 | License Plate Light Assembly (LH) |
| *7 | License Plate Light Assembly (RH) | *8 | Taillight/Stop Light |
| *9 | Taillight | *10 | Rear Turn Signal Light |
| *11 | Back-up Light | *12 | Rear Fog Light (Oncoming Lane Side Only) |
| *13 | Stop Light | - | - |
Daytime Running Light System
The daytime running light system is designed to automatically illuminate the Light Emitting Diode (LED) lights during the daytime to keep the vehicle highly visible to other vehicles.
Light Auto Turn-off System
The light auto turn-off system is used to prevent the driver from leaving the vehicle with the headlights, clearance lights, taillights or license plate lights on.
Outside Handle Illumination
The outside handle illumination system operates the outside handle illumination lights to ensure visibility when approaching or leaving the vehicle at night.
Automatic Headlight Beam Level Control System
When the vehicle is stopped with the engine and headlights on, the automatic headlight beam level control system operates the headlight leveling motors in accordance with movement of the vehicle.
Automatic Light Control System
When the light control switch is in the AUTO position, the automatic light control sensor detects the ambient light level and automatically turns the headlights, taillights, clearance lights, and license plate lights on or off accordingly.
This system is controlled by the main body ECU (multiplex network body ECU).
Emergency Brake Signal System
The stop lights flash automatically in the case of emergency braking to alert following drivers, thus helping to reduce rear-end accidents.
Automatic High Beam System
The automatic high beam system detects lights in front of the vehicle and automatically changes between high beams and low beams to support the driver during night driving.
Follow Me Home System
The follow me home system turns on the headlights (low beams) when the vehicle is parked in order to ensure visibility at night.
Welcome Light Illumination System
The welcome light illumination system operates the clearance lights, taillights and license plate lights in conjunction with the locking and unlocking of the doors, ensuring nighttime usability.
Lane Change Flasher System
The lane change flasher system flashes the turn signal light a certain number of times when the turn signal switch (headlight dimmer switch assembly) is moved to the lane change position. By using the lane change flasher system when changing lanes, it is no longer necessary to hold the turn signal switch in the lane change position.
SPECIFICATION
| Light | Type | Wattage | |
|---|---|---|---|
| Headlight Assembly LH/RH | Low Beam | LED x 3 | 29 |
| High Beam | LED x 3 | 29 | |
| Clearance Light Assembly LH/RH | Daytime Running Light/Clearance Light | LED x 21 | 11/1.4 |
| Front Turn Signal Light | LED x 18 | 21 | |
| Side Turn Signal Light Assembly LH/RH | LED x 3 | 0.3 | |
| Rear Combination Light Assembly LH/RH | Taillight/Stop Light | LED x 12/LED x 16 | 0.7/4.5 |
| Rear Turn Signal Light | WY21W | 21 | |
| Rear Light Assembly LH/RH | Taillight/Stop Light*1 | LED x 12 | 0.5/1.3 |
| Back-up Light | W16W | 16 | |
| Rear Fog Light*2 | LED x 3 | 1.5 | |
| Center Stop Light Assembly | LED x 21 | 1.4 | |
| License Plate Light Assembly (LH/RH) | LED x 1 | 0.3 | |
*1: Models without rear fog light
*2: Models with rear fog light