METER / GAUGE SYSTEM


  1. FUNCTION


    1. Multi Buzzer


      1. The table below shows the warning and reminder functions of the buzzer in the combination meter assembly.

        Priority Item
        1 Driver Seat Belt Warning (Maximum 5 Times)*1
        2 Engine Start while Driving Notice
        3 Engine Switch Operation while Driving Warning
        4 Driver Seat Belt Warning (Once)*1
        5 Front Passenger Seat Belt Warning (Once)*1
        6 Front Seat Belt Warning (Level 2)
        7 Rear Seat Belt Warning*2
        8 Front Seat Belt Warning (Level 1)
        9 Lane Departure Alert System Cancel Warning*3
        10 Unexpected Vehicle Motion Warning (Level 1)
        11 Unexpected Vehicle Motion Warning (Level 2)
        12 Brake Fluid Low Warning
        13 Engine Oil Pressure Warning
        14 EPS Warning
        15 Lane Departure Alert Warning*3
        16 Engine Coolant Temperature Warning
        17 Door Open when Shift Lever not in P Warning
        18 Entry and Start System Warning 1 (Intermittent)
        19 Entry and Start System Warning 2 (Intermittent)
        20 Entry and Start System Warning (Once)
        21 Multi-information Display Warning
        22 Dynamic Radar Cruise Control Cancelation due to Low Speed Warning*3
        23 Immobiliser Certification Reminder
        24 Speed Limit Exceed Warning*1
        25 Adjustable Speed Limit Exceed Warning*4
        26 Parking Brake Engaged Warning
        27 Door Open while Driving Warning
        28 Vehicle Sway Warning*3
        29 Road Sign Assist Indication*4
        30 Sport Shift Reject Warning
        31 Gasoline Particulate Filter System Warning*4
        32 Light Reminder
        33 Rev Indicator
        34 Turn Signal/Hazard Warning Operation

        *1: Models for the near and middle east

        *2: Models with rear seat belt warning function

        *3: Models with Lexus Safety System+

        *4: Models for Europe

    2. Multi-information Display


      1. Display Function Flow


        • The multi-information display can be switched as shown in the flow chart below:

          B004HBIE02
          Item Display Change Condition
          *a Conditions are not met.
          *b Conditions are met.
          *c If there are multiple display requests, items will be displayed in sequence.
          *d An item or display is selected by operating the steering pad switch assembly.
          *e ODO display is displayed for a certain period of time after the engine switch is turned off.
          *f After engine switch on (IG).

      2. Display Tab Operation


        • The information currently displayed can be switched using the RIGHT/LEFT switch of the steering pad switch assembly.

          B004GZOC01
          *A Models with Navigation System *B Models with Lexus Safety System+
          *1 Steering Pad Switch Assembly - -
          *a LEFT Switch *b RIGHT Switch
          *c Drive Information *d "F" Information
          *e Navigation Information *f Audio Information
          *g Driving Assist System Information *h Message
          *i Settings *j The illustrations shown are examples only.
          B004HAI RIGHT switch operation B004H73 LEFT switch operation

      3. Drive Information


        • The drive information tab shows vehicle information such as drivable range and fuel consumption.

        • The drive information display can be changed using the UP/DOWN switch of the steering pad switch assembly.

          B004HAAC01
          *A Models with Tire Inflation Pressure Display Function *B Models with Lexus Safety System+
          *C Destination Package for United Kingdom - -
          *1 Steering Pad Switch Assembly - -
          *a UP Switch *b DOWN Switch
          *c Drive Information 1 *d Drive Information 2
          *e Drive Information 3 *f Tire Pressure Indicator
          *g Gear Position Indicator *h Vehicle Sway Warning
          *i Unit Change *j Blank
          *k The illustrations shown are examples only. - -
          B004HAI DOWN switch operation B004H73 UP switch operation

      4. "F" Information


        • The "F" information tab shows vehicle information such as G-force and rear wing position.

        • The "F" information currently displayed can be changed using the UP/DOWN switch of the steering pad switch assembly.

          B004HB5C02
          *A Models with Torque Vectoring Differential - -
          *1 Steering Pad Switch Assembly - -
          *a UP Switch *b DOWN Switch
          *c Lap Timer *d Lap Time History
          *e Torque Distribution *f G-force
          *g Vehicle Monitor *h The illustrations shown are examples only.
          B004HAI DOWN switch operation B004H73 UP switch operation

      5. Setting Function


        • The items displayed on the multi-information display can be customized.

        • The following items can be selected on the information setting screen.

          Lane Departure Alert System (Models with Lexus Safety System+)
          Item Available Setting
          Steering Assist

          • Setting for steering assist can be set to on/off:


            • On

            • Off
          Alert

          • Alert method can be changed:


            • Buzzer (Icon is displayed)

            • Steering wheel vibration (Icon is displayed)
          Warning Sensitivity

          • Alert sensitivity of alert system can be changed:


            • High

            • Standard
          Vehicle Sway Warning

          • Vehicle sway warning can be set to on/off:


            • On

            • Off
          Vehicle Sway Warning Sensitivity

          • Vehicle sway warning sensitivity can be selected:


            • High

            • Standard

            • Low
          Pre-collision System (Models with Lexus Safety System+)
          Item Available Setting
          PCS

          • The pre-collision system can be set to on/off:


            • On

            • Off
          Sensitivity

          • A pre-collision system warning timing can be selected:


            • Far (Icon is displayed)

            • Middle (Icon is displayed)

            • Near (Icon is displayed)
          Speed Indicator
          Item Available Setting
          Speed Indicator

          • The speed indicator can be set to on/off:


            • On

            • Off
          Speed Setting The vehicle speed for warning activation can be set at increments of 1 km/h or 1 mph between 50 km/h (30 mph) and 160 km/h (100 mph).
          Rear Wing
          Item Available Setting
          Rear Wing

          • The active rear wing function can be switched:


            • ON

            • OFF (Default)
          Meter Settings
          Item Available Setting
          Language

          • The language used on the multi-information display can be selected:


            • English

            • French

            • Spanish

            • German*1

            • Italian*1

            • Russian*1

            • Simplified Chinese*2

            • Arabic*2
          Unit

          • The unit displayed on the multi-information display can be selected:


            • miles (MPG)*1 (Default*3)

            • km (km/L)

            • km (L/100 km) (Default*4)
          Maintenance Required Reminder*5 The accumulated vehicle driving distance memorized in the combination meter assembly can be reset.
          Eco Driving Indicator Light

          • The Eco Driving Indicator Light can be switched:


            • ON (Default)

            • OFF
          TOP Switch Settings Displays how to register the screen which is displayed when the TOP switch is pressed.
          Drive Information 1

          • 2 items can be selected among the following:


            • Current Fuel Consumption (Bar Display)/Average Fuel Consumption (Mark Display) (Default of upper area)

            • Total Average Fuel Consumption Between Reset Operations (Default of lower area)

            • Average Fuel Consumption After Engine Start-up

            • Average Fuel Consumption After Refueling

            • Total Average Vehicle Speed Between Reset Operations

            • Average Vehicle Speed After Engine Start-up

            • Total Elapsed Time Between Reset Operations

            • Elapsed Time After Engine Start-up

            • Cruising Range

            • Cruising Range After Engine Start-up

            • Blank
          Drive Information 2

          • 2 items can be selected among the following:


            • Current Fuel Consumption (Bar Display)/Average Fuel Consumption (Mark Display)

            • Total Average Fuel Consumption Between Reset Operations

            • Average Fuel Consumption After Engine Start-up

            • Average Fuel Consumption After Refueling

            • Total Average Vehicle Speed Between Reset Operations (Default of lower area)

            • Average Vehicle Speed After Engine Start-up

            • Total Elapsed Time Between Reset Operations

            • Elapsed Time After Engine Start-up

            • Cruising Range (Default of upper area)

            • Cruising Range After Engine Start-up

            • Blank
          Drive Information 3

          • 2 items can be selected among the following:


            • Current Fuel Consumption (Bar Display)/Average Fuel Consumption (Mark Display)

            • Total Average Fuel Consumption Between Reset Operations

            • Average Fuel Consumption After Engine Start-up

            • Average Fuel Consumption After Refueling (Default of upper area)

            • Total Average Vehicle Speed Between Reset Operations

            • Average Vehicle Speed After Engine Start-up

            • Total Elapsed Time Between Reset Operations

            • Elapsed Time After Engine Start-up (Default of lower area)

            • Cruising Range

            • Cruising Range After Engine Start-up

            • Blank
          Interruption Display

          • The following displays that appear as soon as the set conditions are met can be switched to ON (Default) or OFF:


            • Turn-by-turn Navigation Display*6

            • Telephone Display

            • Audio

            • Volume

            • Rheostat

            • TVD Mode*7
          Rev Indicator

          • The rev indicator can be switched:


            • ON (Default)

            • OFF

          • The rev indicator setting can be selected when the rev indicator is ON:


            • Setting 1 (fast timing)

            • Setting 2 (middle timing) (Default)

            • Setting 3 (slow timing)
          Tachometer Peak Hold Function

          • The tachometer peak hold function can be switched:


            • ON (Default)

            • OFF
          Vehicle Speed Warning*8

          • The vehicle speed warning can be switched:


            • ON

            • OFF (Default)

          Tech Tips


          • The vehicle speed for warning activation can be set at increments of 1 km/h or 1 mph between 50 and 120 km/h*9 or 50 and 160 km/h (30 and 100 mph)*3 or 50 and 200 km/h*10.

          • The maximum value varies according to the countries and regions.
          Drive Screen

          • The SPORT S mode display can be changed:


            • White ribbon type tachometer (Default)

            • Digital type tachometer

          • The SPORT S+ mode display can be changed:


            • White ribbon type tachometer

            • Digital type tachometer (Default)

          • The CUSTOM mode display can be changed:


            • Eco drive meter

            • Normal type tachometer (Default)

            • White ribbon type tachometer

            • Digital type tachometer
          Initialization The set items can be initialized.

          *1: Models for Europe

          *2: Except models for Europe

          *3: Destination package for United Kingdom

          *4: Except destination package for United Kingdom

          *5: Destination package for South Korea

          *6: Models with navigation system

          *7: Models with torque vectoring differential

          *8: Except models for G.C.C. countries

          *9: Models for China and destination packages for Brunei, Indonesia, Taiwan, Philippines and South Korea

          *10: Models and destination packages for other countries

      6. Warning Mode Function


        • When a warning is necessary, the warning display interrupts the current display on the multi-information display.

        • The master warning light may illuminate or blink and the buzzer in the combination meter assembly may sound depending on the item displayed on the multi-information display.

        Priority Display Master Warning Light Buzzer
        1 TVD Test Mode*1 - -
        CDY-2 - -
        ADJUSTING FORWARD CAMERA*2 - -
        ADJUSTING FRONT RADAR BEAM*2 - -
        ERROR ADJUSTING FRONT RADAR BEAM*2 - -
        ADJUSTING FRONT RADAR BEAM VERTICAL*2 - -
        ADJUSTING FRONT RADAR BEAM VERTICAL*2 - -
        CHECKING PRE-CRASH BRAKE*2 - -
        Checking Cruise Control C/D*2 - -
        Checking Cruise Control Brake*2 - -
        Headlight System Uninitialized Visit Your Dealer - -
        BRAKE!*2 - -*3
        Push and Hold Engine Switch for Emergency Stop Blinks Sounds
        Shift to N and Press Engine Switch to Restart Blinks Sounds
        Engine Stopped Shift to P Blinks Sounds
        Engine Stopped Stop in a Safe Place Blinks Sounds
        2 Dynamic radar cruise control warning reminder indicator (image display)*2 - -
        Lane departure alert warning reminder indicator (image display)*2 - Sounds
        Braking Power Low Stop in a Safe Place See Owner's Manual Blinks Sounds
        3 Door open (while driving) (image display)*4 Blinks Sounds
        Door open (while stopping) (image display) - -
        Parking Assist Malfunction Visit Your Dealer*5 Illuminates -
        Clearance sonar detection (image display)*5 - -
        Parking Assist Malfunction*5 Illuminates -
        Clean Parking Assist Sensor*5 Illuminates -
        Mute Temporarily*5 - -
        Muted Temporarily*5 - -
        4 Power Turned Off to Save Battery - -
        5 Shift to P Before Exiting Vehicle Blinks Sounds
        6 Power Steering Malfunction Steering Power Low Visit Your Dealer Illuminates Sounds
        Steering Power Low Visit Your Dealer Illuminates Sounds
        Power Steering Malfunction Visit Your Dealer Illuminates Sounds
        Release Parking Brake Blinks Sounds
        Key Not Detected Check Key Location Blinks Sounds
        Release Accelerator Blinks Sounds
        7 Slippery Road Cannot Shift to Lower Gear Illuminates Sounds
        Speed Limit Exceeded*6 - Sounds
        LDA Hold Steering Wheel - -
        LDA Steering Assist Unavailable Hold Steering Wheel Illuminates -
        8 Check Engine Visit Your Dealer Illuminates Sounds
        Check Engine Reduced Engine Power Visit Your Dealer Illuminates Sounds
        Reduced Engine Power Visit Your Dealer Illuminates Sounds
        Engine Maintenance Required Visit Your Dealer Illuminates Sounds
        SRS Airbag System Malfunction Visit Your Dealer Illuminates Sounds
        Antilock Brake System Malfunction Visit Your Dealer - Sounds
        Engine Coolant Temp High Stop in a Safe Place See Owner's Manual Illuminates Sounds
        Charging System Malfunction See Owner's Manual - -
        Radar Cruise Control Unavailable Clean Sensor*2 Illuminates Sounds
        Radar Cruise Control Unavailable*2 Illuminates Sounds
        Smart Entry & Start System Malfunction See Owner's Manual Blinks Sounds
        Blind Spot Monitor Unavailable*7 Illuminates Sounds
        Cruise Control Malfunction Visit Your Dealer*2 Illuminates Sounds
        Lane Departure Alert Malfunction Visit Your Dealer*2 Illuminates Sounds
        Front Camera Unavailable*2 - -
        Lane Departure Alert Unavailable*2 Illuminates Sounds
        Lane Departure Alert Turned On Steering Assist Active*2 - -
        Lane Departure Alert Turned On Steering Assist Inactive*2 - -
        Front Camera Vision Blocked Clean and Demist Windshield*2 - -
        Pre-Collision System Malfunction Visit Your Dealer*2 Illuminates Sounds
        Blind Spot Monitor System Malfunction Visit Your Dealer*7 Illuminates Sounds
        Oil Pressure Low Stop in a Safe Place See Owner's Manual Illuminates Sounds
        Transmission Fluid Temp High See Owner's Manual Illuminates Sounds
        Lane Departure Alert Unavailable Below Approx 50 km/h*2 - -
        Lane Departure Alert Unavailable Below Approx 32 MPH*2 - -
        Lane Departure Alert Unavailable at Current Speed*2 - -
        9 Dynamic radar cruise control indicator (image display)*2 - -
        Lane departure alert indicator (image display)*2 - -
        Engine Stopped Steering Power Low Illuminates Sounds
        Turn Off Vehicle Blinks Sounds
        Would You Like to Take a Break?*2 - Sounds
        Please Take a Break*2 - Sounds
        Key Left inside Vehicle Blinks Sounds
        Turn Lights Off Blinks Sounds
        Moon Roof Open*8 Blinks Sounds
        Window Open Blinks Sounds
        Window / Moon Roof Open*8 Blinks Sounds
        Depress Brake and Then Touch Key to Engine Switch Blinks Sounds
        Depress Brake and Then Start Engine - -*9/Sounds*10
        10 Steering Wheel Lock Press Engine Switch while Turning Wheel Blinks Sounds
        TVD System Malfunction Visit Your Dealer*1 Illuminates Sounds
        TVD System Overheated Reduce Engine Speed and Load*1 Illuminates Sounds
        Drive-Start Control Malfunction Visit Your Dealer Illuminates Sounds
        Brake Override Malfunction Visit Your Dealer Illuminates Sounds
        11 Key Battery Low Illuminates Sounds
        Engine Oil Level Low Add or Replace - -
        Headlight System Malfunction Visit Your Dealer Illuminates Sounds
        RSA Malfunction Visit Your Dealer*11 Illuminates Sounds
        Exhaust Filter Full Visit Your Dealer*12 Illuminates Sounds
        Brake Pad Wear Visit Your Dealer Illuminates Sounds
        Accelerator and Brake Pedals Depressed Simultaneously Blinks -
        Tire pressure indicator (image display)*13 - -
        12 Active Rear Wing Malfunction Visit Your Dealer - -
        Windshield Washer Fluid Low - -
        Fuel Low - -
        Roads May Be Icy Drive with Care - Sounds
        Maintenance Required Soon - -
        Maintenance Required Visit Your Dealer - -
        To Activate Auto High Beam, Switch Headlights to High Beam*2 - -
        Depress Brake and Then Start Engine - -
        VSC Turned Off Pre-Collision Brake System Unavailable*2 - -
        Pre-Collision System Unavailable*2 - -
        High Power Consumption Partial Limit On AC/Heater Operation Blinks -
        Pre-Collision System Unavailable Clean Sensor*2 - -
        Pre-Collision System Off*2 - -
        Active Rear Wing Off Go to Settings to turn On - -
        Exhaust Filter Full See Owner's Manual*12 - -
        Exhaust Filter Regeneration In Process*12 - -
        Theft Sensor Turned Off - -
        Theft Sensor Turned On - -

        *1: Models with torque vectoring differential

        *2: Models with Lexus Safety System+

        *3: Skid control buzzer operation is activated.

        *4: If the vehicle has reached a speed of 5 km/h (3 mph)

        *5: Models with LEXUS parking assist-sensor system

        *6: Models for G.C.C. countries

        *7: Models with blind spot monitor system

        *8: Models with sliding roof system

        *9: IG ON

        *10: IG OFF

        *11: Models with road sign assist system

        *12: Models with gasoline particulate filter system

        *13: Models with tire inflation pressure display function

  2. OPERATION


    1. Eco Driving Indicator Light


      1. Eco driving indicator light can operate when all of the following conditions are met:


        • The engine switch is on (IG) and the engine is running.

        • The vehicle is being driven with the shift lever in D.

        • NORMAL mode or ECO mode is selected.

        • The shift paddle switch (transmission shift switch assembly) is not operated.

        • The vehicle is at a speed of 130 km/h (81 mph) or below.

    2. Lap Timer Function


      1. A lap time can be measured by operating the steering pad switch assembly.

      2. The lap time currently being measured and the most recent lap time are displayed on the tachometer, and the total time since the timer was started, each lap time and the fastest lap time are displayed on the multi-information display.

      3. While the timer is operating, the multi-information display can be changed to any display of the "F" information tabs. When the timer is stopped, the display will return to the lap timer display.

        B004H68C01
        *1 Steering Pad Switch Assembly - -
        *a ENTER Switch *b RIGHT Switch
        *c Start (press ENTER switch) *d Lap (press RIGHT switch)
        *e Stop (press ENTER switch) *f Save (press and hold ENTER switch)
        *g Total Time *h Fastest Lap Mark
        *i Current Lap *j Most Recent Lap Time
        *k The illustrations shown are examples only. - -

    3. Lap Time History Function


      1. The lap time history can be displayed.

        B004H91C01
        *1 Steering Pad Switch Assembly - -
        *a ENTER Switch *b UP Switch
        *c RIGHT Switch *d DOWN Switch
        *e BACK Switch *f Total Time
        *g Fastest Lap Time *h Lap Time List
        *i Press ENTER switch *j Press BACK switch
        *k Press UP switch *l Press DOWN switch
        *m Press and hold ENTER switch *n The illustrations shown are examples only.

    4. Torque Distribution Display Function (Models with Torque Vectoring Differential)


      1. The amount of torque distributed to the left and right rear wheels can be displayed.

        B004HAFC01
        *1 Steering Pad Switch Assembly - -
        *a ENTER Switch *b BACK Switch
        *c Torque distribution display on the multi-information display *d Left rear torque amount
        *e Right rear torque amount *f Torque distribution display on the tachometer
        *g The illustrations shown are examples only. - -
        B004HAI ENTER switch operation B004H73 BACK switch operation

      2. On the torque distribution display on the tachometer, the difference between the torque applied to the left and right rear wheels is displayed.

        B004GZHC01
        *a Rear right torque is large *b Rear left torque is large
        *c No difference between rear left and right *d Torque distribution display on the multi-information display
        *e Torque distribution display on the tachometer *f The illustrations shown are examples only.
        B004HAI Difference - -

      3. A torque peak hold function is provided. If more than 4 segments are illuminated, the maximum segment position is indicated using the yellow frame for 3 seconds.

        B004GZPC01
        *a Torque distribution display on the multi-information display *b Torque distribution peak hold display
        *c The illustration shown is an example only. - -

    5. G-force


      1. Longitudinal and lateral G-force applied to the vehicle can be displayed.

      2. By pressing the ENTER switch of the steering pad switch assembly, the G-force is displayed on the tachometer. Additionally, the trace of the maximum G-force is displayed on the multi-information display. This trace can be reset by pressing and holding the ENTER switch.

        B004H3RC01
        *1 Steering Pad Switch Assembly - -
        *a ENTER Switch *b BACK Switch
        *c G-force display on the multi-information display *d G-force of the vehicle
        *e Steering wheel position *f Current G-force value
        *g Accelerator pedal input *h Brake fluid pressure
        *i Record of the maximum G-forces *j Track value of the maximum G-force since display reset
        *k G-force display on the tachometer *l G-force direction
        *m The illustration shown is an example only. - -
        B004HAI ENTER switch operation B004H73 BACK switch operation

        Tech Tips


        • During engine warm-up, steering wheel position, accelerator pedal input and brake fluid pressure are not displayed.

        • This display is intended for use as a guideline. Depending on factors such as the road surface condition, temperature and vehicle speed, the display may not show the actual condition of the vehicle.

    6. Vehicle Monitor


      1. The tire pressure indicator* and rear wing position can be displayed.

        *: Models with tire inflation pressure display function

        B004H7QC02
        *A Models with Tire Inflation Pressure Display Function - -
        *a Rear wing raised *b Rear wing retracted
        *c Tire pressure indicator *d Rear wing position
        *e The illustrations shown are examples only. - -