NAVIGATION SYSTEM / MULTI INFORMATION SYSTEM


  1. FUNCTION OF MAIN COMPONENTS

    Component Function
    Multi-display Assembly

    • Controls image signals received from the radio receiver assembly and sends them to the built-in display panel.

    • Can be used to adjust the color balance of the display panel.

    • Displays the map screen, audio screen, etc. according to image signals received from the radio receiver assembly.
    Remote Touch (Remote Operation Controller Assembly)

    • Sends operation signals to the radio receiver assembly.

    • Vibrates the touchpad to provide feedback according to signals from the radio receiver assembly.
    Radio Receiver Assembly

    • Outputs operation signals from the remote touch (remote operation controller assembly), hand-writing input signals*1 from the touchpad, and data from various components positioned in different parts of the vehicle to the navigation ECU.

    • Processes received navigation information and operation statuses from the navigation ECU and outputs it to the multi-display assembly.

    • Controls the multi-display contents and navigation system according to the signals received from the remote touch (remote operation controller assembly), and sends feedback signals to remote touch (remote operation controller assembly).

    • Sends a startup signal to the navigation ECU when the audio system started.

    • Receives audio signals such as voice guidance from the navigation ECU and sends them to the stereo component amplifier assembly.

    • Sends microphone voice signals to the navigation ECU.

    • Sends an R shift position signal to the navigation ECU.

    • Is equipped with a 2.4 GHz frequency band wireless LAN and can communicate with a wireless clients via Wi-Fi.*2
    Navigation ECU

    • Houses a navigation computer, gyro sensor and GPS receiver, and processes operation signals or vehicle status signals from the radio receiver assembly, controlling the navigation system.

    • Sends image and audio signals, such as navigation information, and the operation status to the radio receiver assembly.
    Major Components of Navigation ECU Navigation Computer

    • Corrects the vehicle position based on location information calculated from GPS information, vehicle speed signals, information from the built-in sensors and the shift status.

    • Applies the mark of the calculated vehicle position to the map database and sends the information and operation status to the radio receiver assembly.

    • Sends audio signals such as voice guidance provided in accordance with the vehicle position, to the radio receiver assembly.

    • Sends navigation information such as directions and route guidance, etc. to the combination meter assembly via the radio receiver assembly.
    Gyro Sensor Detects the vehicle's vertical axis rotation speed (yaw rate and rotation movement) and sends it to the navigation computer.
    GPS Receiver Demodulates GPS information received by the GPS antenna, calculates the vehicle position and sends the position signal to the navigation computer.
    Storage Device Contains map data and the navigation system control program, etc.

    Navigation Antenna Assembly


    • GPS Antenna

    		 Receives GPS signals from satellites in orbit around the Earth, at an altitude of approximately 20,200 km (12,600 miles), and sends them to the navigation ECU.

    Window Glass Antenna Wire (Rear)*3


    • AM

    • FM

    		 Receives radio broadcasting signals (AM/FM).

    Window Glass Antenna Wire (Rear)*4


    • AM

    • FM

    • DAB

    		 Receives radio broadcasting signals (AM/FM/DAB).
    No. 1 Amplifier Antenna Assembly Amplifies radio broadcasting signals from the radio antenna and sends them to the radio receiver assembly.
    Digital Audio Broadcasting Antenna Assembly*4 Amplifies DAB signals from the DAB antenna and sends them to the radio receiver assembly.

    Window Glass Antenna Wire (Quarter)*4


    • DAB

    • DAB Antenna Amplifier

    • Receives radio broadcasting signals (DAB).

    • Amplifies DAB signals from the DAB antenna and sends them to the radio receiver assembly.
    Parking Brake Switch Assembly Sends the parking brake position signal to the radio receiver assembly.
    Steering Pad Switch Assembly Sends operation signals from switches such as the volume switch, mode switch and voice switch to the spiral cable with sensor sub-assembly.
    Spiral Cable with Sensor Sub-assembly Sends operation signals from the steering pad switch assembly to the radio receiver assembly.
    Map Light Assembly Houses the manual (SOS) switch.*5
    Telephone Microphone Assembly

    • Receives the user's voice through the microphone module.

    • Recognizes speech during voice recognition system operation and sends the audio signal to the radio receiver assembly.
    No. 1 Stereo Jack Adapter Assembly

    • Sends audio signals to the radio receiver assembly when an auxiliary device is connected.

    • Communicates with the radio receiver assembly via a USB communication line when a USB memory device, portable audio player (USB type) or Apple product is connected.
    Combination Meter Assembly

    • Sends vehicle speed signals to the radio receiver assembly, stereo component amplifier assembly, telematics transceiver (data communication module)*5 and navigation ECU.

    • Displays navigation information from the navigation ECU, such as directions and route guidance, etc., on the multi-information display via the radio receiver assembly.
    Stereo Component Amplifier Assembly Amplifies audio signals sent from the radio receiver assembly and sends them to the speakers.
    Telematics Transceiver (Data Communication Module)*5 Sends a part of audio signals sent from the radio receiver assembly to the front No. 2 speaker assembly RH.

    *1: Models for Europe

    *2: Models with Wi-Fi communication function

    *3: Except models with Digital Audio Broadcast (DAB) tuner

    *4: Models with Digital Audio Broadcast (DAB) tuner

    *5: Models with manual (SOS) switch

  2. FUNCTION


    1. Navigation Screen


      1. The navigation computer calculates the present position and direction of travel, then determines a route and calculates the driving distance based on the following information sources:


        • Map database

        • Global Positioning System (GPS) satellites

        • Built-in gyro sensor

        • Vehicle speed signal

        • Reverse signal

        • Parking brake signal

        • Radio Data System Traffic Message Channel (RDS-TMC) signal (Models for Europe and Oceania and destination packages for Taiwan, Southeast Asia and South Africa)

        • Real-time Traffic Information of China (RTIC) signal (Destination packages for Southeast Asia)

      2. The functions of the navigation screen are listed below.

        Item Function
        Map Display Taillight-interlocked Map Screen Color Change Changes the color of the map screen that is displayed when the taillights are turned on.
        Map Display Color Change*2*3*4*5*6*7*8 Changes the color of the map screen.
        North Up/Heading Up

        • If North Up is selected, regardless of the direction of vehicle travel, north is always up.

        • If Heading Up is selected, the direction of vehicle travel is always up.
        3D Map Displays a 3-dimensional (3D) view of the map.
        2D and 3D City Map*1

        • Displays some areas of major cities with a 3-dimensional (2D and 3D) city map when the map scale is set to 50 m or less.

        • Always displayed in Heading Up mode.
        Micro City Map*2*8 Displays some areas of major cities with a 2D city map when the map scale is set to 50 m or less.
        3D Suburb Model Map*2 When displaying a 3-dimensional (3D) map and the map scale is set to 100 m or less, a 3D suburb model map can be displayed for some areas of major cities.
        3D City Model Map*3*4*5*6*7*8

        • Displays some areas of major cities with a 3-dimensional (3D) city model map when the map scale is set to 100 m or less.

        • Always displayed in Heading Up mode.
        Dual Map Screen Splits the map in two, and adjusts the scale and orientation of each screen independently.
        Compass Mode Screen Displays the direction of travel and detailed data of the present location.
        Current Position Display Function Displays the current position based on the GPS signals being received.
        Point of Interest Display Displays selected types of points of interest as marks on the map.
        Nearby POI List Display*2*3*4*5*6*7*8 Displays the list of POIs which are located within 20 miles (32 km) from vehicles current position.
        Map Screen Icon Information Display Displays the icon name when the cursor is moved over the icon, and displays detailed information (when available) when the sub function switch on the remote touch is pressed.
        Map Scroll The map screen can be scrolled by touching, dragging or flicking on the touchpad.
        Map Display Map Scale

        Changes the map scale using any of the following methods:*1


        • Scale screen and choose 1 of 16 steps. Also, any desired map scale can be selected by touching the scale indicator.

        • Pinch in/out: Pinch outward on the touchpad to zoom in and pinch inward to zoom out.

        Changes the map scale using any of the following methods:*2*3*4*5*6*7*8


        • Scale screen and choose 1 of 14 steps. Also, any desired map scale can be selected by touching the scale indicator.

        • Pinch in/out: Pinch outward on the touchpad to zoom in and pinch inward to zoom out.
        Route Guidance Demonstration Demonstrates the route guidance to the destination.
        Street Name Indication on Scrolled Map Displays the street name and city name even when the map screen is being scrolled.
        Road Number Sign Board Displays the road number on the map.
        Speed Limit Display Displays a speed limit icon on the map screen when driving on a major road.
        Safety Camera Display*1 Displays safety camera icons on the map.
        One-way road display*2*3*4*5*6*7*8 Displays one-way roads with an arrow showing direction.
        Side Screen Menu Bar*1 Shortcut menu icons are displayed on the left side of the screen and allow the driver to use each function quickly.
        Route Trace*2*3*4*5*6*7*8

        • Stores up to the last 124 miles (200 km) of a traveled route and retraces the route on the display.

        • Available when the map scale is set to 30 miles (50 km) or less.
        RDS-TMC Display*1*2*5*8 Displays RDS-TMC icons, arrows, pop-up messages and indicators when RDS-TMC service is being received.
        RTIC Display*4 Displays RTIC icons, arrows and indicators when RTIC service is being received.
        Destination Search Keyword Search Enables a destination to be searched for using multiple free words and setting the search target country.*1
        Enables a destination to be searched for using multiple free words.*2*4
        Favorites List Search Sets a destination from an item in the favorites list (Memory Point).
        Recent Set Destination Search Stores the coordinates, names, and dates of up to 100 locations that have been set as destinations in the past.
        Address Search A destination can be set by entering a country, and town name/code name, and street/intersection name.*1

        After defining a state (province) or country, the destination can be set in 2 ways:*2


        • Information can be entered in the order of: suburb name, street name and house number.

        • Information can be entered in the order of: house number, street name and suburb name.

        After defining a state (province) or country, the destination can be set in 2 ways:*3*4*5*6*7


        • Information can be entered in the order of: city name, street name and house number.

        • Information can be entered in the order of: house number, street name and city name.
        Information can be entered in the order of: province, town name, street name and area number.*8
        Point of Interest Search A destination can be set by selecting a POI from the search result list after defining a POI category and previous search word or the online search list of the connected service.*1

        After defining a state (province) or country, the destination can be set in 3 ways:*2


        • The name of a POI can be entered and then searched for from suburb, category or use web.

        • A POI category can be selected and a point of interest searched for near the present location, along the current route, near the suburb center or near the destination.

        • The phone number of a point of interest can be entered to search for it.

        After defining a state (province) or country, the destination can be set in 3 ways:*3*4*5*6*7*8


        • The name of a POI can be entered and then searched for from city or category.

        • A POI category can be selected and a point of interest searched for near the present location, along the current route, near the city center or near the destination.

        • The phone number of a point of interest can be entered to search for it.
        Destination Search Phonebook Search*1 A destination can be set by selecting an address from the contact list of a Bluetooth connected phone.
        Coordinate Search A destination can be input by entering its coordinates.
        Emergency Search*2*3*4*5*6*7*8 Performs a specific search for police stations, hospitals and Lexus dealers, etc.
        Postal Code Search*4 A destination can be input by entering its postal code. (This function is not available in some countries or areas.)
        Map Search A destination can be set by using the cursor on the map screen.
        Voice-recognition Search*1*2*4*5*7 A destination can be set by voice command input.
        Smartphone Collaboration Search*2*3*4*5*6*7*8 A location that is searched for on a smartphone that is connected to the radio receiver assembly via Bluetooth, can be set as a destination.
        Automatic Destination List Search*2*3*4*5*6*7*8

        • By registering home and favorite destinations (up to 2 locations) in advance, when turning the engine switch was turned on (ACC) or on (IG), the destination list together with the required time based on route search result is displayed.

        • Starts route guidance when a destination is selected from the list.
        Connected Services Search*1 A destination can be set by searching for new establishments, which are not stored in the data of the in-vehicle device, on the internet using Connected Services.
        Lexus Enform Apps Search*2 A point searched for using Lexus Enform apps can be set as a destination.
        Route Search Multiple Destination Setting Sets multiple destinations. Can also rearrange the sequence of destinations.
        Multiple Route Search Searches for multiple routes.
        Search Condition Designation Enables a search to be performed using fastest route, shortest distance to the set destination and fuel-efficient route search conditions. The results are displayed with the distance and expected arrival time of each of the 3 routes.*1
        Enables a search to be performed using quick, short and alternate search conditions. The results are displayed with the distance and expected arrival time of each of the 3 routes.*2*3*4*5*6*7*8
        Preference Selection When Searching Enables preferences related to toll roads, motorways, ferry/train and tunnel to be set.*1
        Enables preferences related to motorways, unsealed roads,4WD tracks, etc., to be set.*2
        Enables preferences related to motorways, toll roads, ferries, etc., to be set.*3*4*5*6*7*8
        Searched Result Point Map Display*2*3*4*5*6*7*8 Displays the location of a selected point from the search result list on the side screen.
        Detour Search Changes the route to detour around a section of the route.
        Regulated Road Consideration Performs searches which consider regulated roads.
        Traffic Congestion Information Consideration Performs searches which consider traffic congestion information.
        Avoidance Area Searches for a route that avoids a designated area.
        Avoid Traffic Search*2*4*5*8 Automatically changes the route to avoid heavy congestion.
        Automatic Navigation for Commuting*1 The driver can set favorite destinations and day and/or hour information for each destination. Next time the driver starts the vehicle in the specific time slot, the system suggests a destination to the driver or sets a destination automatically.
        Adaptive Route Search*2*3*4*5*6*7*8 When a route other than the route guidance is traveled frequently, the navigation system learns that route and displays it as an adaptive route in the route search results.
        Guidance Voice Guidance Provides voice guidance about the distance and the direction of travel to a destination point based on road conditions and vehicle speed.
        Next Turn Guidance Provides guidance about the distance to the next turn and indicates the direction of the turn using an arrow.
        Turn List Display Displays the turn list which shows the turning direction and distance to each turn on the route to the destination on the side screen.
        Arrow (Turn-by-Turn) Display*2*3*4*5*6*7*8 Displays the next turn and the distance to the turn on the side screen.
        Lane Information Guidance Provides lane information and indicates the lane to be driven in when the vehicle is on a multiple lane road.
        Lane List Display*2*4 When traveling a road with two or more lanes when using route guidance, the navigation system indicates the direction and recommended lane when lane information available in the map data.
        Intersection Zoom-in Display Displays an enlarged intersection map on the side screen when approaching an intersection.
        Signposts Display Displays lane information similar to overhead road traffic signs on the top of the map screen.
        Highway Mode Display*1 Displays the distance to the next junction and exit, or POIs in the vicinity of the highway exit on the side screen.
        Motorway Mode Display*2*3*4*5*6*7 Displays the distance to the next junction and exit, or POIs in the vicinity of the motorway exit on the side screen.
        Freeway Mode Display*8 Displays the distance to the next junction and exit, or POIs in the vicinity of the freeway exit on the side screen.
        Real Highway Junction Display*1 When approaching a major junction, displays a 3D image of the junction on the side screen.
        Real Motorway Junction Display*2*3*4*5*6*7 When approaching a major junction, displays a 3D image of the junction on the side screen.
        Real Freeway Junction Display*8 When approaching a major junction, displays a 3D image of the junction on the side screen.
        Real Motorway Exit Display*3*4*5*6*7 When approaching a major exit, displays a 3D image of the exit on the side screen.
        Real Freeway Exit Display*8 When approaching a major exit, displays a 3D image of the exit on the side screen.
        Direction Sign Display Displays direction signs, similar to overhead motorway signs, with route guidance information overlaid.*2*3*4*5*6*7
        Displays direction signs, similar to overhead highway signs, with route guidance information overlaid.*8
        Route Information Display*1 Displays information such as ETA, traveling time, distance to the destination, traffic prediction information, etc. on the map screen.
        Traffic Events Display*1 Displays traffic events, distance and time to the event point on the route to the destination on the map screen.
        Guidance Route Information Bar Display*2*3*4*5*6*7*8

        Displays the following information:


        • Distance and travel time to the destination

        • Distance to the destination and estimated time of arrival

        • Destinations list when there are multiple destinations
        Traffic Bar Display*2*4*5*8 Displays traffic information of congestions or accidents on the route using the traffic bar.
        Street View Display*1 Searches for street view images of the selected area on the internet using Connected Services and displays the result.
        Fuel price Display*1 Searches for prices of fuel near the current location, near the destination and selected area on the internet using Connected Services and displays the result.
        Weather Information Display*1 Searches for the weather information of the selected area on the internet using Connected Services and displays the results.
        Parking Lot Information Display*1 The location of parking lot and vacancy information of near the current location, near the destination and selected area can be searched on the internet using the connected service and display the result.
        Cross-border Guidance*1 Announces when the vehicle crosses into another country and provides information related to the country such as the speed limit and seatbelt regulations.
        Others Voice Recognition*1*2*4*5*7 Recognizes pre-programmed system commands spoken to operate the navigation system.
        Driver Support Information*2 When the vehicle is approaching a specific zone such as a school zone, railway crossing, high accident zone, speed camera, etc., provides the driver with an announcement by chime, voice warning or warning icon according to the distance to the target.
        Map Coverage Information Display*2*3*4*5*6*7*8 Displays the map area that is stored on the navigation ECU.

        *1: Models for Europe

        *2: Models for Oceania

        *3: Models for G.C.C. countries

        *4: Destination package for Southeast Asia

        *5: Destination package for South Africa

        *6: Destination package for Central and South America

        *7: Destination packages for Hong Kong and Macau

        *8: Destination package for Taiwan

    2. Information Screen


      1. The functions of the information screen display are listed below.

        Tech Tips

        The display order of the menu icons may vary depending on country where the vehicle is sold.

        Item Outline
        ECO Information about fuel consumption per minute or per trip can be displayed.
        Traffic Incidents*1 By receiving the RDS-TMC service, a list of the current traffic incidents is displayed along with information on an incident's distance and position relative to the vehicle. When the user sets a route that receives traffic information (My traffic routes), traffic information along the route is displayed.
        Traffic Information*2*3*4

        • By receiving the RDS-TMC service, a list of the current traffic incidents is displayed along with information on an incident's distance and position relative to the vehicle.*2*3

        • By receiving the RTIC service, a list of the current traffic incidents is displayed along with information on an incident's distance and position relative to the vehicle.*4

        • When the user sets a route that receives traffic information (My traffic routes), traffic information along the route is displayed.

        *1: Models for Oceania

        *2: Destination package for South Africa

        *3: Destination package for Taiwan

        *4: Destination package for Southeast Asia

    3. Setup Screen


      1. The settings for the functions of the multi-display are available from the setup screen.

        Tech Tips

        The display order of the menu icons or menu items may vary depending on the country where the vehicle is sold.

        Item Function
        General Settings

        • The daylight savings time of the navigation system clock can be set.*1*2*3*4*5*6*7

        • The language can be selected.*1*3*4*6*7

        • Screen settings can be changed:


          • Screen off

          • Day mode

          • Contrast and brightness of the map and menu screen

          • Contrast and brightness of the camera screen

        • The voice recognition language can be selected.*1

        • The color of the screen theme can be changed.

        • The unit of measurement for distance/fuel consumption can be changed.

        • Automatic return from the audio/air conditioning control screen to the map screen after audio control operation can be changed.

        • The selection sound can be set.

        • The pointer sound can be set.

        • The error sound can be set.

        • The pointer sound volume can be adjusted.

        • The strength of the feedback force which pulls the cursor toward the buttons can be adjusted.

        • The cursor speed and pointer speed can be changed.

        • Multi-touch command can be turned on/off.

        • Keyboard layout can be changed.*2

        • Entered keyboard history can be deleted.

        • Keyboard history memory can be turned on/off.

        • Search history can be deleted.

        • Registered information (personal data) can be cleared.

        • The navigation system program can be updated.

        • The Gracenote database can be updated.*1

        • The set security mode on/off setting can be changed.*8

        • Third party software information used in the navigation system, can be displayed.
        Bluetooth Settings

        • Bluetooth devices can be selected, connected or edited.

        • Bluetooth devices can be registered.

        • Bluetooth devices can be deleted.

        • Bluetooth system settings can be displayed or changed:


          • Automatic connection to a Bluetooth device

          • Automatic connection priority of devices for both the Bluetooth hands-free system and Bluetooth audio system

          • Bluetooth device details can be displayed or changed:


            • - Bluetooth device name

            • - Bluetooth device PIN-code

            • - Bluetooth device address

            • - Display of Bluetooth device connection status of the phone

            • - Display of Bluetooth device connection status of the audio player

            • - Bluetooth device profile
        Audio Settings

        • Set detailed audio settings such as:


          • Cover art display

          • Display of information from the Gracenote database*1

          • Video screen size change

          • Video image quality adjustment

        • Set detailed FM radio settings such as:


          • The FM station list can be refreshed.*7

          • The listing order of the station list can be set*1*5*7

          • Setting to automatically seek an FM station that regularly broadcasts traffic information and station broadcasts can be set*1*5

          • Setting to automatically select an FM station providing good reception if current reception worsens can be set*1*5*7

          • Setting to switch to a broadcasting station within the same local program network can be set*1*5*7

          • The FM radio text feature can be set*1*2*3*4*5*6*8

        • DAB settings can be changed:*1*2*5*7


          • The DAB station list can be refreshed.*5*7

          • L-band in the tune range can be set

          • Setting to automatically seek a DAB station that regularly broadcasts traffic information and station broadcasts can be set

          • Setting to automatically select a DAB station providing good reception if current reception worsens can be set

          • The DAB text feature can be set*1*2*5

        • DVD settings can be changed:


          • Audio language

          • Subtitle language

          • DVD video menu language

          • Multi-angle mark display during multi-angle compatible disc playback

          • Viewer restriction level

          • Auto start playback

          • Volume difference adjustment between the lowest and highest volume
        Phone Settings*1*2*5

        • Bluetooth devices can be selected, connected or edited.

        • Phone sound settings can be changed:


          • Ring Tone

          • Ring Tone Volume

          • In-call Volume

          • E-mail Incoming Tone

          • SMS/MMS Incoming Tone

          • SMS/MMS Incoming Tone Volume

          • E-mail Incoming Tone Volume

          • Message Readout volume

        • Notification settings can be changed:


          • Screen to display the incoming call display can be changed between the main screen and side screen

          • SMS/MMS notification pop-up

          • Incoming SMS/MMS display when an SMS/MMS message is received

            "Full Screen": The incoming SMS/MMS display screen is displayed and can be operated on the screen.

            "Drop-Down": A message is displayed on the top of the screen.

          • E-mail notification pop-up

          • Incoming e-mail display when an e-mail is received

            "Full Screen": The incoming e-mail display screen is displayed and can be operated on the screen.

            "Drop-Down": A message is displayed on the top of the screen.

          • Contact/history transfer completion message display

        • Contact/Call history settings can be changed:


          • Automatic contact/history transfer function settings when a PBAP compatible Bluetooth phone is connected

          • Contacts update by the connected phone or USB device via USB cable

          • Contacts Sorting

          • Contact addition to the favorites list

          • Contacts deletion from the favorites list

          • Call history deletion*9

          • New contact addition to the contact list*9

          • Contact list editing*9

          • Contact deletion from the contact list*9

        • Message function settings can be changed:


          • Message automatic forwarding from cellular phones

          • Automatic message readout

          • Message read status on phone update

          • Display the message account name of the Bluetooth connected phone on the message screen

          • Vehicle signature on outgoing messages

        • Country where the user uses the Lexus Euro assistance 24 service can be selected.*1
        Phone Settings*3*4*6*7*8

        • Bluetooth devices can be selected, connected or edited.

        • Phone sound settings can be changed:


          • Ring Tone

          • Ring Tone Volume

          • In-call Volume

        • Notification settings can be changed:


          • Screen to display the incoming call display can be changed between the main screen and side screen

          • Contact/history transfer completion message display

        • Contact/Call history settings can be changed:


          • Automatic contact/history transfer function settings when a PBAP compatible Bluetooth phone is connected

          • Contacts update by the connected phone or USB device via USB cable

          • Contacts Sorting*3*4*6*8

          • Contact addition to the favorites list

          • Contacts deletion from the favorites list

          • Call history deletion*9

          • New contact addition to the contact list*9

          • Contact list editing*9

          • Contact deletion from the contact list*9

          • Voice tags can be added, edited and deleted*3*6*8
        Voice Settings

        • The voice guidance volume can be adjusted.

        • Voice guidance during route guidance can be set.*2*3*4*5*6*8

        • The voice guidance for when using the audio, visual and air conditioning system can be set.*2*3*4*5*6*7*8

        • Voice recognition prompts can be set.*1*2*4*5*7

        • Street name guidance can be set.*1

        • Avoidable route announcement can be set.*1

        • The navigation guidance beep sound can be set.*2*3*4*5*6*7*8

        • Automatic volume settings for voice guidance while driving at high speeds can be set.*7
        Vehicle Settings

        • Settings can be changed for the following maintenance items:*2*3*4*5*6*7*8


          • Reminder

          • Engine oil

          • Oil filter

          • Rotation

          • Tyres/Tires

          • Battery

          • Brake pad

          • Wipers

          • Coolant

          • Brake fluid/Brake oil

          • Trans. fluid

          • Service

          • Air filter

          • Personal

          • Delete all

          • Reset all

          • Set dealer

        • Customizable vehicle settings can be changed.

        • LEXUS parking assist-sensor system adjustment.

        • Customizable drive mode settings can be changed.

        • Valet mode can be set to on/off and a password can be set.*1
        Navigation Settings*1

        • Map settings can be changed:


          • Map layout can be set.

          • Map screen brightness can be set.

          • Arrival information can be set.

          • Speed limits can be set.

          • Automatic map zoom can be set.

          • The categories of POI to be displayed on the map can be set.

          • Display of route guidance arrow can be set.

          • Display of current street name or the next street name can be set.

          • Display of 3D buildings can be set.

          • Display of 3D landmarks can be set.

          • Display of signposts can be set.

          • Display of junction view can be set.

          • Display of lane recommendation can be set.

          • Display of traffic bar can be set.

          • Display of traffic message icons can be set.

          • Display of safety cameras icons can be set.

          • Setting to obtain information to display safety camera icons via internet can be changed.

          • Display of vehicle path can be set to on or off.

          • Display of highway mode can be set.

          • Display of country information when the vehicle crosses into another country can be set.

        • Traffic message settings can be changed:


          • Setting to receive traffic messages can be changed.

          • Setting of traffic information via internet can be changed.

          • Setting to receive the traffic message channel can be changed.

          • Radius for displaying traffic messages can be set.

          • Reroute setting after receiving a traffic message can be changed.

        • Route preferences settings can be changed:


          • Recommended route type can be set.

          • Traffic information history at route calculation can be set.

          • 3 routes map screen after route calculation can be set.

          • Avoidance criteria for the route calculation can be set.

        • Manage stored destinations settings can be changed:


          • Deletion of all favorites.

          • Deletion of all recent destinations.

          • Import favorites list stored on a USB memory device to the system.

          • Export favorites list to a USB memory device for backup.
        Navigation Settings*2*3*4*5*6*7*8

        The Navigation Settings can be used to:


        • Set and edit the Home

        • Set up preset favorites list*2*3*4*5*6*7

        • Set up preset memory points*8

        • Set up areas to avoid

        • Set detailed navigation settings such as:


          • The automatic screen button hiding function

          • The pop-up information display

          • The favorite POI categories displayed on the map screen

          • Guidance for IPD roads

          • Unverified road guidance warning

          • Voice guidance for the next street name

          • The display of the intersection zoomed map

          • The automatic zooming function

          • Map display color

          • Map animation

          • Drag/flick operation on map screen

          • Clear adaptive route data

          • Manual adjustment of the current vehicle position mark and correction of the miscalculated distance caused by tire replacement

          • The display of the 3D suburb map*2

          • The display of the 3D city map*3*4*5*6*7*8

          • Notification of ERP area on the route to the destination*4

          • Notification of rodizio restriction area on the route to the destination*6

          • The search range when nearby gas stations are being searched when the fuel level is low

          • Edit or delete route traces, save memory points to a USB memory device as backup

          • Speed limit display

          • Speed threshold for speed limit warning message for each road type*2*4

          • Time restriction notification

          • Private road notification

          • Automatic destination list display

          • Notification of SALIK gate on the route to the destination*3

          • Notification of e-toll gate on the route to the destination*5

          • Adaptive routes

          • Alert areas for driver support information*2

          • Safety zone display on the map screen*2*4

          • High accident zone guidance*4
        Wi-Fi Settings*1*3*4*5*6

        • The Wi-Fi function can be switched on/off.

        • Network access can be turned on/off.

        • Connected network name can be displayed.

        • Available networks that can be connected can be searched for.

        • A WPS (Wi-Fi Protected Setup) compatible Wi-Fi device can be connected quickly.

        • Wi-Fi settings can be changed:


          • The networks list can be edited

          • An automatic connection to a preferred network can be set

          • An automatic connection message can be set

        • The Miracast connection status is displayed.
        Wi-Fi Settings*2*8

        • The Wi-Fi function can be switched on/off.

        • The Miracast connection status is displayed.
        Online Settings*1

        • Account of the Lexus portal site can be set.

        • Display of map update information can be set.

        • Desired search provider can be set.

        • Fuel type of the vehicle can be set.

        • List of the applications downloaded to the navigation system can be displayed.

        • Order of application contents can be changed.

        • Auto-start application when navigation system starts can be set.
        Enform App Suite Settings*2

        • The pop-up reminder for cellular phone data usage can be set.

        • The settings for automatic on/off detection of the iPhone app can be set.

        • The settings for the extension mode when a USB device is connected can be set.

        • Apps can be installed via a USB device.
        App Suite Settings*3*4*5*6 Message display setting when using Apps data can be changed.
        Traffic Info Settings*2*4*5*8

        • The traffic information reception for the specified routes, such as frequently used routes, can be set.*2*5*8

        • The avoid traffic function can be set to auto/manual.

        • The usage of traffic information for the estimated arrival time can be set to on/off.*2*5*8

        • An arrow display for free flowing traffic can be set to on/off.

        • Consideration of the predictive traffic information for the estimated arrival time and detoured route search can be set to on/off.*2

        • Voice warning when a traffic incident is displayed can be set to on/off.*2*5*8

        • Traffic information icon display can be set to on/off.*2*5*8

        *1: Models for Europe

        *2: Models for Oceania

        *3: Models for G.C.C. countries

        *4: Destination package for Southeast Asia

        *5: Destination package for South Africa

        *6: Destination package for Central and South America

        *7: Destination packages for Hong Kong and Macau

        *8: Destination package for Taiwan

        *9: PBAP non-compatible phone, or PBAP compatible phone with the automatic contact/history transfer function set to off

  3. DIAGNOSIS


    1. For details on the procedure required to enter the Service Menu screen, refer to the Repair Manual.