BRAKE CONTROL SYSTEM


  1. CONSTRUCTION


    1. The brake actuator assembly consists of the brake actuator portion and skid control ECU.

      A01FJKQC02
      *1 Skid Control ECU Portion *2 Motor Portion
      *3 Reservoir Portion - -
      *a Cross Section - -

    2. The actuator portion consists of 2 master cylinder cut solenoid valves, 4 pressure holding solenoid valves, 4 pressure reduction solenoid valves, 2 pumps, 2 reservoirs, and a master cylinder pressure sensor.

      A01FJ9LC01
      *1 Master Cylinder Pressure Sensor *2 Master Cylinder Cut Solenoid Valve
      *3 Pressure Holding Solenoid Valve *4 Pressure Reduction Solenoid Valve
      *5 Pump *6 Reservoir
      *a From Master Cylinder *b Front Brake RH
      *c Front Brake LH *d Rear Brake RH
      *e Rear Brake LH - -