REAR SUSPENSION SYSTEM


  1. CONSTRUCTION


    1. Ball joints are used on the rear stabilizer link assembly, ensuring excellent response and high rigidity.

    2. Due to the use of metal fittings on each rear stabilizer bush, the deflection amount of the bush is reduced. Additionally, due to the Teflon liner and fluoro polymer coating, the friction against the stabilizer bar is reduced. This enables the rear stabilizer bush to be effective even during initial steering operation and ensures good roll characteristics.

      A01FJ7VC01
      *1 Rear Stabilizer Bar *2 Rear Stabilizer Link Assembly
      *a Cross Section of Rear Stabilizer Bushing *b Metal Fitting
      *c Teflon Liner and Fluoro Polymer Coating - -