DIFFERENTIAL SYSTEM


  1. CONSTRUCTION


    1. A dual dampening construction, in which the differential is mounted to the suspension member via rubber mounts, is used.

    2. The rear differential is supported by the suspension member at 4 points: 2 at the front and 2 at the rear.

    3. A liquid-filled differential mount is used for the rear right mount to reduce vibration and noise.

    4. The sleeve of the front mount is made of aluminum. On the FD21CF Type Rear Differential, the upper stopper of the front mount is also made of aluminum to reduce weight.

      A01FJHBC01
      *A FD21CT Type Rear Differential *B FD21CF Type Rear Differential
      *a A - A Cross Section *b B - B Cross Section
      *c C - C Cross Section - -
      B004GZL Liquid (Non-freezing) A01FJHW Mount Rubber