DRIVE SHAFT SYSTEM


  1. OUTLINE


    1. On models without the Torque Vectoring Differential, a cross groove type Constant Velocity (CV) joint is used.

    2. On models with the Torque Vectoring Differential, a tripod type Constant Velocity (CV) joint is used on the rear differential side, and a Rzeppa type CV joint is used on the wheel side.

      A01FJHNC01
      *A Models without Torque Vectoring Differential *B Models with Torque Vectoring Differential
      *1 Rear Drive Shaft Assembly - -
      *a Cross Groove Type CV joint *b Rzeppa Type CV joint
      *c Tripod Type CV joint - -
      B004H73 Rear Differential Side B004HAI Wheel Side