FUNCTION
Rear Seat Belt Warning (Models with Rear Seat Belt Warning Function)
The rear seat belt warning function indicates the state of the rear seat belts using the rear seat belt warning light on the air conditioning control assembly.
The combination meter assembly sends a rear seat belt warning signal to the air conditioning control assembly based on the rear seat belt buckle switches and courtesy switches for the doors. When the signal is received, the air conditioning control assembly operates the rear seat belt warning lights. If a warning is necessary, the buzzer in the combination meter assembly will also sound.
The flow of operations that results in a rear seat belt warning is as follows:
| Step | Condition Transition | Warning Light | Buzzer |
|---|---|---|---|
| (a) | Engine switch is off. | Warning is not displayed. | No Sound |
| (b) | A door is opened then closed. | ||
| (c) |
|
|
|
| (d) | Either of the rear seat belts are unfastened. | Seats with an unfastened seat belt will be displayed regardless of the number of occupants. | If the vehicle speed exceeds 20 km/h (12 mph): 1. Sounds for 30 seconds*1 2. Sounds for an additional 90 seconds*2 |
| (e) | When one of the following conditions is met, the buzzer will stop sounding. - The seat belt is refastened. - Vehicle speed is lower than approximately 2 km/h (1.2 mph) and either the parking brake is applied or the shift lever is in P. |
|
Stops sounding |
*1: Sound cycle is 1.2 seconds.
*2: Sound cycle is 0.4 seconds.