METER / GAUGE SYSTEM


  1. FUNCTION


    1. Multi Buzzer


      1. The table below shows the warning and reminder functions of the buzzer in the combination meter assembly.

        Priority Item
        1 Driver Seat Belt Warning (Maximum 5 Times)*1
        2 Engine Start while Driving Notice
        3 Engine Switch Operation while Driving Warning
        4 Driver Seat Belt Warning (Once)*1
        5 Front Passenger Seat Belt Warning (Once)*1
        6 Front Seat Belt Warning (Level 2)
        7 Front Seat Belt Warning (Level 1)*1
        8 Rear Seat Belt Warning*2
        9 Front Seat Belt Warning (Level 1)*3
        10 Lane Departure Alert System Cancel Warning*4
        11 Unexpected Vehicle Motion Warning (Level 1)
        12 Unexpected Vehicle Motion Warning (Level 2)
        13 Brake Fluid Low Warning
        14 Engine Oil Pressure Warning
        15 EPS Warning (Once)
        16 EPS Warning (Intermittent)
        17 Lane Departure Alert Warning*4
        18 Engine Coolant Temperature Warning
        19 Stop and Start System Warning*5
        20 Door Open when Shift Lever not in P Warning
        21 Entry and Start System Warning 1 (Intermittent)
        22 Entry and Start System Warning 2 (Intermittent)
        23 Entry and Start System Warning (Once)
        24 Multi-information Display Warning
        25 Dynamic Radar Cruise Control Cancelation due to Low Speed Warning*4
        26 Immobiliser Certification Reminder
        27 Speed Limit Exceed Warning*1
        28 Adjustable Speed Limit Exceed Warning*6
        29 Parking Brake Engaged Warning
        30 Door Open while Driving Warning
        31 Vehicle Sway Warning*4
        32 Road Sign Assist Indication*7
        33 Sport Shift Reject Warning
        34 Light Reminder
        35 Turn Signal/Hazard Warning Operation

        *1: Models for the near and middle east

        *2: Models with rear seat belt warning function

        *3: Except models for the near and middle east

        *4: Models with Lexus Safety System+

        *5: Models with stop and start system

        *6: Models for Europe

        *7: Models with road sign assist system

    2. Multi-information Display


      1. Display Function Flow


        • The multi-information display can be switched as shown in the flow chart below:

          Figure 1. Models with Optitron Meter

          B0071YIE01
          Item Display Change Condition
          *a Conditions are not met.
          *b Conditions are met.
          *c If there are multiple display requests, items will be displayed in sequence.
          *d An item or display is selected by operating the steering pad switch assembly.
          *e ODO display is displayed for a certain period of time after the engine switch is turned off.
          *f After engine switch on (IG).

          Figure 2. Models with TFT LCD Meter

          B00729WE01
          Item Display Change Condition
          *a Conditions are not met.
          *b Conditions are met.
          *c TOP switch operated.
          *d Movable meter ring activated.
          *e An item or display is selected by operating the steering pad switch assembly.
          *f If there are multiple display requests, items will be displayed in sequence.
          *g After engine switch on (IG).
          B0072AME01
          Item Display Change Condition
          *a Conditions are not met.
          *b Conditions are met.
          *c TOP switch operated.
          *d Movable meter ring activated.
          *e An item or display is selected by operating the steering pad switch assembly.
          *f If there are multiple display requests, items will be displayed in sequence.
          *g ODO display is displayed for a certain period of time after the engine switch is turned off.

      2. Display Tab Operation (Optitron Meter and TFT LCD Meter)


        • The information currently displayed can be switched using the RIGHT/LEFT switch of the steering pad switch assembly.

          B0071YRC01
          *A Models with Navigation System *B Models with Stop and Start System
          *1 Steering Pad Switch Assembly - -
          *a LEFT Switch *b RIGHT Switch
          *c Drive Information *d Navigation Information
          *e Audio Information *f Driving Assist System Information
          *g Stop and Start System Information *h Message
          *i Settings *j The illustrations shown are examples only.
          B0072B5 RIGHT switch operation B007279 LEFT switch operation

      3. Drive Information (Optitron Meter)


        • The drive information tab shows vehicle information such as drivable range and fuel consumption.

        • The drive information display can be changed using the UP/DOWN switch of the steering pad switch assembly.

          B0072G6C01
          *A Models with Tire Inflation Pressure Display Function *B Models with Lexus Safety System+
          *1 Steering Pad Switch Assembly - -
          *a UP Switch *b DOWN Switch
          *c Drive Information 1 *d Drive Information 2
          *e Drive Information 3 *f ECO Driving Indicator Zone Display
          *g Tire Pressure Indicator *h Vehicle Sway Warning
          *i Gear Position Indicator *j Blank
          *k The illustrations shown are examples only. - -
          B0072B5 DOWN switch operation B007279 UP switch operation

      4. Drive Information (TFT LCD Meter in Menu Mode)


        • The drive information tab shows vehicle information such as drivable range and fuel consumption.

        • The drive information display can be changed using the UP/DOWN switch of the steering pad switch assembly.

          B0071YSC01
          *A Models with 8AR-FTS Engine *B Models with Tire Inflation Pressure Display Function
          *1 Steering Pad Switch Assembly - -
          *a UP Switch *b DOWN Switch
          *c Drive Information 1 *d Drive Information 2
          *e Drive Information 3 *f ECO Driving Indicator Zone Display
          *g Boost Meter / Oil Pressure Gauge / Oil Temperature Gauge *h G Monitor
          *i Tire Pressure Indicator *j Gear Position Indicator
          *k Vehicle Sway Warning *l Blank
          *m The illustrations shown are examples only. - -
          B0072B5 DOWN switch operation B007279 UP switch operation

      5. Information (TFT LCD Meter in Normal Mode)


        • The drive information tab shows vehicle information such as drivable range and fuel consumption.

        • The information currently displayed can be changed using the UP/DOWN switch of the steering pad switch assembly.

          B007271C01
          *A Models with Tire Inflation Pressure Display Function *B Destination package for United Kingdom
          *1 Steering Pad Switch Assembly - -
          *a UP Switch *b DOWN Switch
          *c Drive Information 1 (Upper Area) *d Drive Information 1 (Lower Area)
          *e Drive Information 2 (Upper Area) *f Drive Information 2 (Lower Area)
          *g Drive Information 3 (Upper Area) *h Drive Information 3 (Lower Area)
          *i ECO Driving Indicator Zone Display *j Tire Pressure Indicator
          *k Gear Position Indicator *l Unit Change
          *m Blank *n The illustrations shown are examples only.
          B0072B5 DOWN switch operation B007279 UP switch operation

      6. Stop and Start System Information Mode Function (Models with Stop and Start System)


        • Stop and start system information shows vehicle information such as idling stop time and saved fuel.

        • The stop and start system information can be switched using the UP/DOWN switch on the steering pad switch assembly.

          B007239C01
          *1 Steering Pad Switch Assembly - -
          *a UP Switch *b DOWN Switch
          *c Total Amount of Engine Stoppage Time / Amount of Engine Stoppage Time After Engine Start-up / Amount of Engine Stoppage Time Between Reset Operations *d Total Amount of Engine Stoppage Time / Amount of Saving Fuel After Engine Start-up / Amount of Saving Fuel Between Reset Operations
          *e The illustrations shown are examples only. - -
          B0072B5 DOWN switch operation B007279 UP switch operation

      7. Setting Function


        • The items displayed on the multi-information display can be customized.

        • The following items can be selected on the information setting screen.

          Lane Departure Alert System (Models with Lexus Safety System+)
          Item Available Setting
          Steering Assist

          • Setting for steering assist can be set to on/off:


            • On

            • Off
          Alert

          • Alert method can be changed:


            • Buzzer (Icon is displayed)

            • Steering wheel vibration (Icon is displayed)
          Warning Sensitivity

          • Alert sensitivity of alert system can be changed:


            • High

            • Standard
          Vehicle Sway Warning

          • Vehicle sway warning can be set to on/off:


            • On

            • Off
          Vehicle Sway Warning Sensitivity

          • Vehicle sway warning sensitivity can be selected:


            • High

            • Standard

            • Low
          Pre-collision System (Models with Lexus Safety System+)
          Item Available Setting
          PCS

          • The pre-collision system can be set to on/off:


            • On

            • Off
          Sensitivity

          • A pre-collision system warning timing can be selected:


            • Far (Icon is displayed)

            • Middle (Icon is displayed)

            • Near (Icon is displayed)
          Speed Indicator (Models with TFT LCD meter)
          Item Available Setting
          Speed Indicator

          • The speed indicator can be set to on/off:


            • On

            • Off
          Speed Setting The vehicle speed for warning activation can be set at increments of 1 km/h or 1 mph between 50 km/h (30 mph) and 160 km/h (100 mph).
          Meter Settings
          Item Available Setting
          Language*1

          • The language used on the multi-information display can be selected:


            • English

            • French

            • Spanish

            • German

            • Italian

            • Russian

            • Simplified Chinese

            • Traditional Chinese

            • Arabic
          Unit

          • The unit displayed on the multi-information display can be selected:


            • miles (MPG) (Default*2)

            • km (L/100 km) (Default*3)

            • km (km/L) (Default*4)
          Eco Driving Indicator Light

          • The Eco Driving Indicator Light can be switched:


            • ON (Default)

            • OFF
          Drive Information 1

          • 2 items can be selected among the following:


            • Current Fuel Consumption (Bar Display)/Average Fuel Consumption (Mark Display) (Default of upper area)

            • Total Average Fuel Consumption Between Reset Operations (Default of lower area)

            • Average Fuel Consumption After Engine Start-up

            • Average Fuel Consumption After Refueling

            • Total Average Vehicle Speed Between Reset Operations

            • Average Vehicle Speed After Engine Start-up

            • Cruising Range After Engine Start-up

            • Total Elapsed Time Between Reset Operations

            • Elapsed Time After Engine Start-up

            • Cruising Range

            • Blank
          Drive Information 2

          • 2 items can be selected among the following:


            • Current Fuel Consumption (Bar Display)/Average Fuel Consumption (Mark Display)

            • Total Average Fuel Consumption Between Reset Operations

            • Average Fuel Consumption After Engine Start-up

            • Average Fuel Consumption After Refueling

            • Total Average Vehicle Speed Between Reset Operations (Default of lower area)

            • Average Vehicle Speed After Engine Start-up

            • Cruising Range After Engine Start-up

            • Total Elapsed Time Between Reset Operations

            • Elapsed Time After Engine Start-up

            • Cruising Range (Default of upper area)

            • Blank
          Drive Information 3

          • 2 items can be selected among the following:


            • Current Fuel Consumption (Bar Display)/Average Fuel Consumption (Mark Display)

            • Total Average Fuel Consumption Between Reset Operations

            • Average Fuel Consumption After Engine Start-up

            • Average Fuel Consumption After Refueling (Default of upper area)

            • Total Average Vehicle Speed Between Reset Operations

            • Average Vehicle Speed After Engine Start-up

            • Cruising Range After Engine Start-up

            • Total Elapsed Time Between Reset Operations

            • Elapsed Time After Engine Start-up (Default of lower area)

            • Cruising Range

            • Blank
          TOP Switch Settings*5 Displays how to register the screen which is displayed when the TOP switch is pressed.
          Interruption Display

          • The following displays that appear as soon as the set conditions are met can be switched to ON (Default) or OFF:


            • Turn-by-turn Navigation Display*6

            • Telephone Display

            • Audio

            • Volume

            • Stop and Start System Duration*7

            • Stop and Start System Status*7

            • Rheostat
          Accent Color*5

          • The accent color can be changed:


            • White Heat (Default)

            • Titanium Silver
          Needle Color*8

          • The needle color of the tachometer can be changed:


            • Blue (Default)

            • Red

            • White
          Vehicle Speed Warning*8, *9

          • The vehicle speed warning can be switched:


            • ON

            • OFF (Default)

          Tech Tips


          • The vehicle speed for warning activation can be set at increments of 1 km/h between 50 and 120 km/h or 50 and 200 km/h.

          • The maximum value varies according to the countries and regions.
          Rev Indicator*8

          • The rev indicator setting can be switched:


            • ON (Default at 5000 rpm)

            • OFF

          Tech Tips

          The engine speed for rev indicator activation can be set at increments of 100 rpm between 2000 rpm and 6600 rpm.
          Tachometer Peak Hold Function*8

          • The tachometer peak hold function can be switched:


            • ON (Default)

            • OFF
          Initialization The set items can be initialized.

          *1: Available display languages differ by destination

          *2: Destination package for United Kingdom

          *3: Except destination packages for United Kingdom and South Korea

          *4: Destination package for South Korea

          *5: Models with optitron meter

          *6: Models with navigation system

          *7: Models with stop and start system

          *8: Models with TFT LCD meter

          *9: Except models for the near and middle east

      8. Warning Mode Function


        • When a warning is necessary, the warning display interrupts the current display on the multi-information display.

        • The master warning light may illuminate or blink and the buzzer in the combination meter assembly may sound depending on the item displayed on the multi-information display.

        Priority Display Master Warning Light Buzzer
        1 CDY-2 - -
        VGRS Test Mode*1 - -
        DRS TEST MODE*1 - -
        ADJUSTING FORWARD CAMERA*2 - -
        ADJUSTING FRONT RADAR BEAM*2 - -
        ERROR ADJUSTING FRONT RADAR BEAM*2 - -
        ADJUSTING FRONT RADAR BEAM VERTICAL*2 - -
        ADJUSTING FRONT RADAR BEAM HORIZONTAL*2 - -
        CHECKING PRE-CRASH BRAKE*2 - -
        CHECKING CRUISE CONTROL C/D*2 - -
        CHECKING CRUISE CONTROL BRAKE*2 - -
        Headlight System Uninitialized Visit Your Dealer - -
        BRAKE!*2 - -*3
        Push and Hold Engine Switch for Emergency Stop Blinks Sounds
        Shift to N and Press Engine Switch to Restart Blinks Sounds
        Engine Stopped Shift to P Blinks Sounds
        Engine Stopped Stop in a Safe Place Blinks Sounds
        2 Dynamic radar cruise control warning reminder indicator (image display)*2 - -
        Lane departure alert warning reminder indicator (image display)*2 - -
        Braking Power Low Stop in a Safe Place See Owner's Manual Blinks Sounds
        Shift to P Before Exiting Vehicle Blinks Sounds
        3 Door open (while driving)*4 Blinks Sounds
        Door open (while stopping) - -
        Clearance sonar detection (image display)*5 - -
        Parking Assist Malfunction Visit Your Dealer*5 Illuminates Sounds
        Parking Assist Unavailable Clean Parking Assist Sensor*5 Illuminates Sounds
        Parking Assist Unavailable*5 Illuminates Sounds
        4 Power Turned Off to Save Battery - -
        5 Shift to P Before Exiting Vehicle Blinks Sounds
        6 Power Steering Malfunction Steering Power Low Visit Your Dealer Illuminates Sounds
        Steering Power Low Visit Your Dealer Illuminates Sounds
        Power Steering Malfunction Visit Your Dealer Illuminates Sounds
        Release Parking Brake Blinks Sounds
        Key Not Detected Check Key Location - Sounds
        Release Accelerator Blinks Sounds
        7 Slippery Road Cannot Shift to Lower Gear Illuminates Sounds
        Speed Limit Exceeded*6 - -
        Lane Departure Alert Driver Attention Required*2 Illuminates Sounds
        LDA Hold Steering Wheel*2 - -
        LDA Steering Assist Unavailable Hold Steering Wheel*2 Illuminates -
        8 Check Engine Visit Your Dealer Illuminates Sounds
        Check Engine Reduced Engine Power Visit Your Dealer Illuminates Sounds
        Reduced Engine Power Visit Your Dealer Illuminates Sounds
        SRS Airbag System Malfunction Visit Your Dealer Illuminates Sounds
        Antilock Brake System Malfunction Visit Your Dealer - Sounds
        Engine Coolant Temp High Stop in a Safe Place See Owner's Manual Illuminates Sounds
        Charging System Malfunction See Owner's Manual - -
        Radar Cruise Control Unavailable Clean Sensor*2 Illuminates Sounds
        Radar Cruise Control Unavailable*2 Illuminates Sounds
        Smart Entry & Start System Malfunction See Owner's Manual Illuminates Sounds
        Blind Spot Monitor Unavailable*7 Illuminates Sounds
        Cruise Control Malfunction Visit Your Dealer*2 Illuminates Sounds
        Lane Departure Alert Malfunction Visit Your Dealer*2 Illuminates Sounds
        Front Camera Unavailable*2 - -
        Lane Departure Alert Unavailable*2 Illuminates Sounds
        Lane Departure Alert Turned On Steering Assist Active*2 - -
        Lane Departure Alert Turned On Steering Assist Inactive*2 - -
        Front Camera Vision Blocked Clean and Demist Windshield*2 - -
        Prolongs Stop & Start and Reduces AC Output*8 - -
        Balances Stop & Start and AC Output*8 - -
        Pre-Collision System Malfunction Visit Your Dealer*2 Illuminates Sounds
        Blind Spot Monitor System Malfunction Visit Your Dealer*7 Illuminates Sounds
        Oil Pressure Low Stop in a Safe Place See Owner's Manual Illuminates Sounds
        Transmission Fluid Temp High See Owner's Manual Illuminates Sounds
        Check VGRS System*1 Illuminates Sounds
        Check DRS System*1 Illuminates Sounds
        POP UP HOOD Activated.*9 Illuminates Sounds
        POP UP HOOD Failure.*9 Illuminates Sounds
        Lane Departure Alert Unavailable Below Approx 50km/h*2 - -
        Lane Departure Alert Unavailable Below Approx 32MPH*3 - -
        Lane Departure Alert Unavailable at Current Speed*2 - -
        9 Dynamic radar cruise control indicator (image display)*2 - -
        Lane departure alert indicator (image display)*2 - -
        Stop & Start System Malfunction Visit Your Dealer*8 Illuminates Sounds
        Engine Stopped Steering Power Low Illuminates Sounds
        Turn Off Vehicle Blinks Sounds
        Would You Like to Take a Break?*2 - Sounds
        Please Take a Break*2 - Sounds
        Key Left inside Vehicle - -
        Turn Lights Off Blinks Sounds
        Moon Roof Open*10 Blinks Sounds
        Window Open Blinks Sounds
        Window/Moon Roof Open*10 Blinks Sounds
        Depress Brake and Then Touch Key to Engine Switch Blinks Sounds
        Depress Brake and Then Start Engine - -*11/Sounds*12
        10 Steering Wheel Lock Press Engine Switch while Turning Wheel Blinks Sounds
        Drive-Start Control Malfunction Visit Your Dealer Illuminates Sounds
        Brake Override Malfunction Visit Your Dealer Illuminates Sounds
        11 Key Battery Low - Sounds
        Engine Oil Level Low Add or Replace - -
        Headlight System Malfunction Visit Your Dealer Illuminates Sounds
        RSA malfunction Visit Your Dealer*13
        Accelerator and Brake Pedals Depressed Simultaneously Blinks -
        Tire pressure indicator (image display)*14 - -
        12 Windshield Washer Fluid Low - -
        Fuel Low - -
        Roads May Be Icy Drive with Care - Sounds
        Traction Control Turned Off - -
        Oil Maintenance Required Soon*15 - -
        Maintenance Required Soon - -
        Injector Maintenance Required Soon*16 Illuminates -
        Oil Maintenance Required*15 - -
        Maintenance Required Visit Your Dealer - -
        Injector Maintenance Required Visit Your Dealer*16 Illuminates -
        To Activate Auto High Beam, Switch Headlights to High Beam*2 - -
        Depress Brake and Then Start Engine - -
        VSC Turned Off Pre-Collision Brake System Unavailable*2 - -
        High Power Consumption Partial Limit On AC/Heater Operation Blinks -
        Pre-Collision System Unavailable*2 - -
        Pre-Collision System Unavailable Clean Sensor*2 - -
        Pre-Collision System Off*2 - -
        Theft Sensor Turned Off - -
        Theft Sensor Turned On - -

        *1: Models with Lexus dynamic handling system

        *2: Models with Lexus Safety System+

        *3: Skid control buzzer operation is activated.

        *4: If the vehicle has reached a speed of 5 km/h (3 mph)

        *5: Models with LEXUS parking assist-sensor system

        *6: Models for the near and middle east

        *7: Models with blind spot monitor system

        *8: Models with stop and start system

        *9: Models with pop up hood

        *10: Models with sliding roof system

        *11: IG ON

        *12: IG OFF

        *13: Models with road sign assist system

        *14: Models with tire inflation pressure display function

        *15: Models with engine oil maintenance required reminder function

        *16: Models with injector maintenance required reminder function

  2. OPERATION


    1. Eco Driving Indicator Light and ECO Driving Indicator Zone Display


      1. The following table shows the operation of Eco Driving Indicator Light and ECO Driving Indicator Zone Display in different driving conditions:

        Optitron Meter and TFT LCD in Menu Mode
        Driving Condition Eco Driving Indicator Light ECO Driving Indicator Zone Display
        While Stopped Turns off B0072ET
        While Eco Driving Turns on B00724I
        While Non-eco Driving Turns off B00725Z

        When any of the following conditions is met, operation is stopped.


        • Engine switch off.

        • Engine stopped.

        • Shift lever is not in D.

        • A paddle shift switch is operated.

        • NORMAL mode or ECO mode not selected.

        • The vehicle is being driven at a speed of 130 km/h (81 mph) or higher.

        		 Turns off B0072DT
        TFT LCD in Normal Mode
        Driving Condition Eco Driving Indicator Light ECO Driving Indicator Zone Display
        While Stopped Turns off B00720O
        While Eco Driving Turns on B00720S
        While Non-eco Driving Turns off B0072F3

        When any of the following conditions is met, operation is stopped.


        • Engine switch off.

        • Engine stopped.

        • Shift lever is not in D.

        • A paddle shift switch is operated.

        • NORMAL mode or ECO mode not selected.

        • The vehicle is being driven at a speed of 130 km/h (81 mph) or higher.

        		 Turns off B00720O